Good and informative, many thanks, I had raked my brains about why a 4 wheel drive needs a wheelie bar until I upgraded to brush-less and while off road saw the the front wheels lift up and the power driving all wheels which were the 2 then made the car flip ;)
You can get motor and esc combos from either eBay, BANGGOOD or aliexpress. Surpass hobby brand are pretty good. I wouldn’t recommend gool rc. They have laggy esc which have a delay in them.
Hello from Cyprus. First of all thanks for your enlightening videos. I have just ordered from Ali the surpass hobby 3650 3500 kv for my carnage 2 and I was wondering what is the best combination for battery and pinion gear with this motor. Thanks in advance
That motor will be ok with a 26tooth pinion. The spur gear is standard. I normally run anything from 3300mah battery to a 5000mah battery. That will give you good run time about 20 min, plus depends on how hard you push your car.
Here you go mate. www.ebay.com.au/itm/M0-6-Mod0-6-Brushless-Motor-Pinion-Steel-Gear-3-175mm-Shaft-17T-28T-W-Screw-/274683174463?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=705-154756-20017-0
Nice Vid! Do you know if there is any chance to change the spur gear/pinion with 1 mod size. I’m having problems with 3S and 0.6 mod 😕 and 1mod should be more durable...
yeah it does feel faster, i need to buy a speedometer. plus the way the shocktower broke, would have been when it was sliding upside down on the road. it would have caught on the road surface. 🤔
I just got a standard one from aliexpress. that has a heat mount with it. AU $8.72 21％ Off | 540 3650 3660 3670 Motor Heat Sink Cover w/ Cooling Fan Heatsink RC Parts Brushless Aluminum Electric 1/10 For HSP Himoto Redcat a.aliexpress.com/_mNel8YC
Good and informative, many thanks, I had raked my brains about why a 4 wheel drive needs a wheelie bar until I upgraded to brush-less and while off road saw the the front wheels lift up and the power driving all wheels which were the 2 then made the car flip ;)
Thanks mate. Yeah once you upgrade to brushless , more power will kick in and definatly need a wheelie bar. Thanks for watching👍🏼🚗
Oh he sounds strong and sweet we’ll done Anges😎 teapot enjoyed this show here 💯✅
Yeah it goes well. One of my favs. I should be getting some new tyres for it soon. So make sure to look out for the new video
hi. i have just brought the ftx carnage brushed and have been wanting to buy the best cheap brushless modifications do you have any suggestions
You can get motor and esc combos from either eBay, BANGGOOD or aliexpress. Surpass hobby brand are pretty good. I wouldn’t recommend gool rc. They have laggy esc which have a delay in them.
Hello from Cyprus.
First of all thanks for your enlightening videos.
I have just ordered from Ali the surpass hobby 3650 3500 kv for my carnage 2 and I was wondering what is the best combination for battery and pinion gear with this motor.
Thanks in advance
That motor will be ok with a 26tooth pinion. The spur gear is standard. I normally run anything from 3300mah battery to a 5000mah battery. That will give you good run time about 20 min, plus depends on how hard you push your car.
Thanks again!
I’m ordering the things to convert my brushes to brushless; where can I find the pinion you used or at least the correct pitch ?
Hey Jarred, I’ll get back to you tonight with the Pinion pitch as I’m at work at the moment , and I can’t remember what it is. Sorry mate talk soon.
0.6 pitch mate
Wait I’m not sure but what battery did u use
2s ovonic 6200mah
@@Wsm.Filip2013 can you tell me what size tires/rims are on the carnage and what other models fit it?
Can you send me the link for the pinion gear m8 thanks 👍🏻
Here you go mate.
www.ebay.com.au/itm/M0-6-Mod0-6-Brushless-Motor-Pinion-Steel-Gear-3-175mm-Shaft-17T-28T-W-Screw-/274683174463?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=705-154756-20017-0
how many tooth spur gear do i need with it?
Still using the original spur gear. I only upgraded the pinion
That bigger pinion certainly woke it up mate, pity you broke it the posts but thats the risk running no body hey
Yeah definitely runs heaps quicker, but yeah spewing about not having the body on!. thats my own fault!
@@angesrc Least parts are cheap, this ftx chassis looks very similar if not identical to my Himoto Bowie and VRX Cobra
@@PERTHWESTOZRC yeah they are you could say nearly identical with the vrx
Nice Vid! Do you know if there is any chance to change the spur gear/pinion with 1 mod size. I’m having problems with 3S and 0.6 mod 😕 and 1mod should be more durable...
@@kaninja69 thanks mate, yeah there should be a mod1 pinion and spur to suit. I can’t remember where I saw it, but you can buy them for sure . 👍🏼🚗
Much faster mate!👌
That shock tower broke in a strange place🤔
yeah it does feel faster, i need to buy a speedometer. plus the way the shocktower broke, would have been when it was sliding upside down on the road. it would have caught on the road surface. 🤔
@@angesrc need some more alloy ones😅
@@rccrazy yeah, I know this guys who makes them!😆
@@angesrc 😆👌
Nice! What kv is the 3650?
3500kv
What cooling fan u got on the motor?
I just got a standard one from aliexpress. that has a heat mount with it.
AU $8.72 21％ Off | 540 3650 3660 3670 Motor Heat Sink Cover w/ Cooling Fan Heatsink RC Parts Brushless Aluminum Electric 1/10 For HSP Himoto Redcat
a.aliexpress.com/_mNel8YC
Nice!! Also this Rc is cool
Yes one of my favorite rc cars. It runs really well and haven’t broken any major parts yet. 👍🏼🚗
@@angesrc not broken as cobra right
@@RC-gj7kq no , nothing had broken yet, even with bigger motor and pinion. And big jumps.
Ъъ