We saw Mr Picking the week after he got the cider. Really sweet of Patrick to go and check on him, good to see him back and well. You guys are sound, good people, that is part of why we love watching. Awesome metal, awesome banta and awesome people 👌👍
Harry it seems the engine is sat in that cradle behind the machine in a corner with no air flow whatsoever!! I think a complete redesign of the oil and water cooling systems with external radiators and fans that actually move a significant amount of air through the rads would be a first step to prolonging the life of the engine, not only that an oil dry sump system for each engine would give you a visible oil filter to check daily and move the oil tank/pump/filter away from the machine and make maintenance far easier for you to maintain
We should all spam email Taurus until they pull their finger out and get in touch. You have done nothing but big them up from getting it and they treat you like this man! shocking buisness!
Company I used to work for bought a 1 million pound machine and ended up scrapping it 10 years later as technology had advanced and no one would buy it
Looking at your engine casing and cooling rads the problem is clear - air flow. Those rads need fans firstly, no where near enough air through those. Where the engines sit, has even less airflow, wouldn’t mind bettering that steel sheet acts as huge rad retaining heat too. Most new cars don’t even have sump plugs and the oil is sucked out. Sure the same can be done for those.
I feel your pain Richard... I'm a Richard too .. Punched a glass window in my front door after finding out my missus was an escort.. Yay Severed all my ligaments nerves and tendons and main artery in my arm as well as breaking my hand and my wrist.. Lost 8 pints of blood and died for 8 n a half minutes in the back of the ambulance.. I was then put in an induced coma for 12 hours but came back fighting... It's now 2 n a half years later and I've just started to be able to move my fingers and thumb again... To add insult to injury, I lost my license last year for three years... It's not been an easy few years... Stay strong man Try to get out for some walks in nature... I pretty much spent a year in bed with depression with a hand that doesn't work... Then just when I started to feel better, bye bye license.. Hope the futures a bit brighter... Cheers for the content guys.. You're welcome to read this out Harry It might help some people feel a bit better Peace and love
Good to hear Rich is on the meand. As a person who works on this type of gear daily. I can see this will be a recurring problem for you guys. My advice would be, your spending the $ so may as well modify what you have to, and reach a good outcome. These companies push sales not after sales if your looking for a company that cares and is qaulity on all levels buy a moros
Seems like scrap yards are having a tough break at the minute! Your Taurus is down, and two yards opposite ends of Suffolk had massive fires within a week of each other this past week! I know hindsight is 20/20 but you should've considered Lindemann, or Copex, or Sierra, or Lefort!!
The steel sheets u need to flush mount the bolts we dyna bolt our trench plates down so cars cant fall in a hole if they get moved somehow but the dyna bolts would always get broke from trucks car and our excavators.
Great episode , what is failing in the CAT engines . should be access holes in the base plate to drain the oil out . Great to hear he is on the mend even if its slow . i am missing Richards jokes and Humor.
Recover rejuvenate and Heal Rich BLESS You. Harry keeps the Channel working but despite You hating the Camera You're Missed Amigo Fight and Return 💪💪💪 Mark 💗
Brother as a fellow adhd’er that had nonstop hay fever and a jacked up septum in my nose I can tell you that getting g the surgery to fix my deviated septum is the best decision I’ve made (other than my Mrs of course). You won’t believe how much better it can be
Pleased to hear you are on the road to recovery Richard. Get yourself a cold tub bruv, it will help with the mental warfare if you have any going on 👊🏻 looking forward to the next update.
just as a little maybe helpful idea in front of the weight bridge maybe putting a barrior that can be raised and lowered by a button from one of the ladies or men in the office at the window and also a green or red light so that when they are ready for the next person to come onto the weight bridge that the light will go green and the barrier will lift just a idea
Even here in Australia we are slowly losing our iron ore exports our mining boom has been over for a while just plateaud now it will end up going bust or downsizing we have a whole new world being forced upon us and its all a hard downhill roll the world as we knew it is gone
after watching the taurus debacle, i checked taurus horoscope, it confirms harry is correct in sorting both engines, look Aug 18, 2024 - Follow your instincts, Taurus. Even if you tend to listen more to your reason, put that aside. While your ears can hear words, your intuition can hear what's between the lines and provide you with a much bigger picture. If something sounds right but feels wrong, you'll be better off trusting your feelings. Act with careful consideration and caution. :)
Im still a bit unsure what the Taurus does and what is actually broken with it. If the engines are overheating get someone to engineer your own solution with oil coolers etc.
The Taurus is a scrap shear/baler - takes awkward sized/large steel objects and compresses them down to size, and depending on application can either cut them down i.e. shear them, where it'll then get sold direct to steel mills, or squeeze it into a cube for transport to another processor, like a fragmentation plant. Without it, they're unable to process the material and make the most money out of the material being brought in.
Realistically, there is nothing to the Taurus that should make it so hard to deal with. An engine which I assume runs a hydraulic pump, maybe an alternator to generate power for the control systems and some valves. There is no reason Taurus should be ignoring your calls, unless they have realised they have fudged up really bad somewhere. What is the actual issue you are having? I read a comment that said something about engines overheating, I wonder if you can upgrade the cooling system so it has a larger cooling capacity? Assuming its designed to sit in the middle of a yard, is it possible in the corner you are having air flow issues? Ah, watching those lathes being manhandled hurts. There is some money in them selling them as machines, but the hassle is what makes them worth scrapping I guess :(
It’s absolutely disgusting the way they are treating you you would think they would send a cat to see it. Find out what is the problem with your Tauruses? Keep up the good work I love the videos every Sunday.
Bit of a random one I have a friend who goes magnet fishing I was bored and went with him one day and he is pulling out little bits of metal I mean small like a couple of grams at a time and he was throwing it back into the water If he was to bag up Would you let him weigh it in if he got a few kgs of it Not that he's going to do that, I.'m just interested to know if you would take it
Why don't you have a skip for broken glass and when customers come in they can break the glass in the skip and you could recycle it instead of the setting about the yard when people don't want to tell you it's there also I would suggest any broken glass from any metals doors or windows is not included and overall price as it cost you more to get rid of broken glass especially car glass window glass
And leave skip before weighbridge with a sing saying any broken glass break here send me a specific location just before the weighbridge for vans and cars 0:03 😁
@@gregshearer423 May or may not be the case, but did Taurus give harry permission to remove the engines for inspection ??If so there must be some form of communication either way this Something he has already done which will void the warranty if it was in place and Taurus will get out of it that way. End of day a judge will decide but ive worked on heavy plant and that machine shouldn't of been placed where it has been. From the limited info that been provided it sounds like a overheating problem with the oil which has caused premature ware of the engines.Whoever was in charge in service ing that machine should be responsible as a good fitter would have pulled the plug and said move it due to the confines of yard boundaries which in all essence shouldn't have to be 4 meter high concrete block encasing the machine and not allowing it to breathe. Hardworking machine will break if the oil becomes contaminated and if it had a service schedule the fitter should have seen it before it happened.
Some bloke years ago warned you about taurus in the comments, he said it was a bunch of junk and they are not reliable.. You shot him down on the next video and told him he knows nothing.. Well well well haha
I was crying watching the metal lathes swinging around on a chain. I would love to own one of those.
Those lathes etc going to scrap is criminal
We saw Mr Picking the week after he got the cider. Really sweet of Patrick to go and check on him, good to see him back and well. You guys are sound, good people, that is part of why we love watching. Awesome metal, awesome banta and awesome people 👌👍
Harry it seems the engine is sat in that cradle behind the machine in a corner with no air flow whatsoever!! I think a complete redesign of the oil and water cooling systems with external radiators and fans that actually move a significant amount of air through the rads would be a first step to prolonging the life of the engine, not only that an oil dry sump system for each engine would give you a visible oil filter to check daily and move the oil tank/pump/filter away from the machine and make maintenance far easier for you to maintain
Thanks for the mention Will 😂.. really chuffed to hear Richard is on the mend. Positive thoughts and well wishes 👍🏼
We should all spam email Taurus until they pull their finger out and get in touch. You have done nothing but big them up from getting it and they treat you like this man! shocking buisness!
Glad to hear Richard is getting better.
I live in Australia and I'm in the market for something similar to this. Glad I heard your side of the story.
Bridgend do Taurus shears still, massive south wales firm. Might be worth calling them, probably the biggest shear repair company in Europe
Harry been on a session that's his nose issue lol xxx
Those lathes were worth around £2000 each!! scrap price £140 each
Company I used to work for bought a 1 million pound machine and ended up scrapping it 10 years later as technology had advanced and no one would buy it
Looking at your engine casing and cooling rads the problem is clear - air flow. Those rads need fans firstly, no where near enough air through those. Where the engines sit, has even less airflow, wouldn’t mind bettering that steel sheet acts as huge rad retaining heat too. Most new cars don’t even have sump plugs and the oil is sucked out. Sure the same can be done for those.
Great stuff again from THEE Scrap Kings 💯💯 Best of Luck to Rich in his recovery 💪💪
I feel your pain Richard...
I'm a Richard too ..
Punched a glass window in my front door after finding out my missus was an escort..
Yay
Severed all my ligaments nerves and tendons and main artery in my arm as well as breaking my hand and my wrist..
Lost 8 pints of blood and died for 8 n a half minutes in the back of the ambulance..
I was then put in an induced coma for 12 hours but came back fighting...
It's now 2 n a half years later and I've just started to be able to move my fingers and thumb again...
To add insult to injury, I lost my license last year for three years...
It's not been an easy few years...
Stay strong man
Try to get out for some walks in nature...
I pretty much spent a year in bed with depression with a hand that doesn't work...
Then just when I started to feel better, bye bye license..
Hope the futures a bit brighter...
Cheers for the content guys..
You're welcome to read this out Harry
It might help some people feel a bit better
Peace and love
What happened to Richard?
All the best to big Rich, hope to see him on a episode soon.🤗
Get well soon Richard
Good video Harry and team. Hope Taurus do the right thing.
Good to hear Rich is on the meand. As a person who works on this type of gear daily. I can see this will be a recurring problem for you guys. My advice would be,
your spending the $ so may as well modify what you have to, and reach a good outcome. These companies push sales not after sales if your looking for a company that cares and is qaulity on all levels buy a moros
Seems like scrap yards are having a tough break at the minute! Your Taurus is down, and two yards opposite ends of Suffolk had massive fires within a week of each other this past week!
I know hindsight is 20/20 but you should've considered Lindemann, or Copex, or Sierra, or Lefort!!
Brilliant again thanks lads. Best wishes to Rich speedy recovery fingers crossed 👍
Glad Mr Pickings back 🍺
What happened to Richard??? Great to see Mr pickings back at it. Shame to see them lathes scrapped. Brilliant video as always.
The steel sheets u need to flush mount the bolts we dyna bolt our trench plates down so cars cant fall in a hole if they get moved somehow but the dyna bolts would always get broke from trucks car and our excavators.
Brilliant as always keep up the good work lads xxx give Richard my love please Harry xxx
Great episode , what is failing in the CAT engines . should be access holes in the base plate to drain the oil out . Great to hear he is on the mend even if its slow . i am missing Richards jokes and Humor.
15:33 let me just lock it up 'closes door' 😂
Recover rejuvenate and Heal Rich BLESS You. Harry keeps the Channel working but despite You hating the Camera You're Missed Amigo Fight and Return 💪💪💪 Mark 💗
Brother as a fellow adhd’er that had nonstop hay fever and a jacked up septum in my nose I can tell you that getting g the surgery to fix my deviated septum is the best decision I’ve made (other than my Mrs of course). You won’t believe how much better it can be
Get well soon rich and good prices H see you monday bless sean good little team keep up the good work lads
All the best rich we miss you 💪🏻
Pleased to hear you are on the road to recovery Richard. Get yourself a cold tub bruv, it will help with the mental warfare if you have any going on 👊🏻 looking forward to the next update.
Ha ha taroni --Aurus sounds like a new type of dinosaur!!!
No way what happened to Richard hope your well as u can be mate 😢
just as a little maybe helpful idea in front of the weight bridge maybe putting a barrior that can be raised and lowered by a button from one of the ladies or men in the office at the window and also a green or red light so that when they are ready for the next person to come onto the weight bridge that the light will go green and the barrier will lift just a idea
and get well soon Rich lad we are all here supporting you and hope you get well soon
Glad tae hear yer oan the mend Rich 👍👍👀
See were putting in as many adverts as possible cover the costs of the Taurus advert after 10 seconds In love you guys
We don’t control how many/when the adverts are unfortunately 😭
Even here in Australia we are slowly losing our iron ore exports our mining boom has been over for a while just plateaud now it will end up going bust or downsizing we have a whole new world being forced upon us and its all a hard downhill roll the world as we knew it is gone
Roll up at their premises with some of your trucks, they some come and talk then. With tv cameras and bloggers..
Should have saying" richs haulage" on his big flat bed wagon 😊
Great vid again lads harry funny as f ...k shame about that Taurus relationship but you did the correct thing highlighting the fact ❤❤
Wicked video mate especially when you read my message out it was mega mad 🤪
Can we see more of people stripping they copper in the yard. I love on Sunday when this pops up makes my day. 🎉
if you have been doing the cat oil samples when servicing you already know the engine is failing. im guessing its high lead in the oil.
£2-3k on them lathes, depending on condition, buggered now!
Well that escalated quickly from we can't talk about it 😮
he’s a gorm that Sean is
Get dad to send the lawyers over simple as that
Absolutely disgusting how Taurus have treated you. Not surprised about cat though we've had trouble with them. Hope you get it sorted.
after watching the taurus debacle, i checked taurus horoscope, it confirms harry is correct in sorting both engines, look
Aug 18, 2024 - Follow your instincts, Taurus. Even if you tend to listen more to your reason, put that aside. While your ears can hear words, your intuition can hear what's between the lines and provide you with a much bigger picture. If something sounds right but feels wrong, you'll be better off trusting your feelings. Act with careful consideration and caution. :)
review on the devlon material handler machine is it better than doosan ?? regards
Develon is Doosan, just a new name
👌💪🤘🤙👊👍🍻 get well soon rich
Im still a bit unsure what the Taurus does and what is actually broken with it. If the engines are overheating get someone to engineer your own solution with oil coolers etc.
The Taurus is a scrap shear/baler - takes awkward sized/large steel objects and compresses them down to size, and depending on application can either cut them down i.e. shear them, where it'll then get sold direct to steel mills, or squeeze it into a cube for transport to another processor, like a fragmentation plant.
Without it, they're unable to process the material and make the most money out of the material being brought in.
Well that’s my Taurus order cancelled.
Realistically, there is nothing to the Taurus that should make it so hard to deal with. An engine which I assume runs a hydraulic pump, maybe an alternator to generate power for the control systems and some valves. There is no reason Taurus should be ignoring your calls, unless they have realised they have fudged up really bad somewhere. What is the actual issue you are having? I read a comment that said something about engines overheating, I wonder if you can upgrade the cooling system so it has a larger cooling capacity? Assuming its designed to sit in the middle of a yard, is it possible in the corner you are having air flow issues?
Ah, watching those lathes being manhandled hurts. There is some money in them selling them as machines, but the hassle is what makes them worth scrapping I guess :(
Do you buy refrigeration pots at taroni's
Please pay attention to the nose wipe at 7:43
Getting roasted but have 101 excuses lined up 🤣
Taurus managment, i hope your next shit is a hedgehog😩, good episode guys👍👍
It’s absolutely disgusting the way they are treating you you would think they would send a cat to see it. Find out what is the problem with your Tauruses? Keep up the good work I love the videos every Sunday.
Sue them for damages
Take a trip over to tourus and see them face 2 face see what they say then
I don't speak any English 😂😂
You gave Taurus free advertising when you was buying the machine.
Bad aftersales. Keep getting the tatt' in
Do not forget to hit the like button and subscribe button it only takes a minute
Propper gorm
how much for 4 bags ov sand in wire wise did ya see it on cctv
Hi Harry wat are the name of the shades u were lol
will you pay more for really clean brass
Bit of a random one I have a friend who goes magnet fishing I was bored and went with him one day and he is pulling out little bits of metal I mean small like a couple of grams at a time and he was throwing it back into the water If he was to bag up Would you let him weigh it in if he got a few kgs of it Not that he's going to do that, I.'m just interested to know if you would take it
What an absolute shame, that man obviously doesn't know what he could get for them Lathes at least £8-900 a piece.
I forgot to say I hope Richard is ok and doing well
Tell them u going to take them. To court mite change there tune
What happend to Richard ???? I wish him all the best.
Are the engines just for electric ?
Sounds like rod bearing failure on those engines ,not good.
Why don't you have a skip for broken glass and when customers come in they can break the glass in the skip and you could recycle it instead of the setting about the yard when people don't want to tell you it's there also I would suggest any broken glass from any metals doors or windows is not included and overall price as it cost you more to get rid of broken glass especially car glass window glass
And leave skip before weighbridge with a sing saying any broken glass break here send me a specific location just before the weighbridge for vans and cars 0:03 😁
What happened to Richard hope hes wel alls well 🙏
Taurus warranty ? Voided if you start replacing engines unless its Blue group extra care
From the sound of it the warranty not worth the paper it’s wrote on 😂
@@gregshearer423 May or may not be the case, but did Taurus give harry permission to remove the engines for inspection ??If so there must be some form of communication either way this Something he has already done which will void the warranty if it was in place and Taurus will get out of it that way. End of day a judge will decide but ive worked on heavy plant and that machine shouldn't of been placed where it has been. From the limited info that been provided it sounds like a overheating problem with the oil which has caused premature ware of the engines.Whoever was in charge in service ing that machine should be responsible as a good fitter would have pulled the plug and said move it due to the confines of yard boundaries which in all essence shouldn't have to be 4 meter high concrete block encasing the machine and not allowing it to breathe. Hardworking machine will break if the oil becomes contaminated and if it had a service schedule the fitter should have seen it before it happened.
Some bloke years ago warned you about taurus in the comments, he said it was a bunch of junk and they are not reliable.. You shot him down on the next video and told him he knows nothing..
Well well well haha
Bet you washed you when the electricity route on the Taurus not the engine
I told u many time to avoid taurus
can i have that scooter I need a new ride to work, plus pinks more my style bro
Hi ya hall two the h w taroni family how's things and how's rich then doing take care
It should be down to Taurus, it's them who design the machine, totally disgusting of a company, washing their hands of the problem.
Maybe sell it back to them for not offering support 🤔
Bit hard if they are ignoring you
What’s happened to Richard? Did he have an accident?
Get rid of cats engines and get Cummins
Knock Knock
cant believe wastemans scrapping that lathe !!! worth well over a grand if not more..
Wonder how much you would get for the Taurus in scrap?
Then buy a machine from a better company because Taurus clearly are not it.
what happened to his older brother , the boss man i mean
Hi hi
This episode is sponsored by... Taurus... Or maybe not!!
I use bricks
As it's your machine, why not paint out the name Taurus off the side of the machine. So they loose the free advertising you are giving them .🤔
What happened to Richard?
I can't understand you either.
FFS bin the spoiler alerts ⚠️ 📢 😑
How come?
@@HWTaroniMetalsLtd
Spoils the rest of a good vlog!
Fair point, we won’t put them in the next episode and see if it looks better! 🙏🏼🎉
@HWTaroniMetalsLtd
Sure, it will be an improvement as showing short spoilers is definitely a SPOILER 😜
What happened to rich ??
Wastemanz need to get a export man contact, those lathes would of done a grand each to the africans
well Harry stop moaning get sum work done lol how rich doin wen he goin tobe bk we miss him pmsl
I remember when they took you over to Germany too, what a load of shit
Italy.