I had the manual mode activated on my E250 CDI 2012. Now I can lock the transmission in ex 5th gear before overtaking a car. No sudden gearshift during acceleration. Jumping from from 50 to 80 km zone also goes smooth in 4th.
@@raketjefsen no matter how fast you press it? I’m asking because I want to dyno my merc and it would auto downshift every time he gave it full throttle even without hitting the switch
Great tutorial. Have a car with the 7g+ and was interested whether could be coded to display current gear when the car is in "D"? Currently it shows only D and not D1, D2, etc. which it does when in manual mode.
Hello, excellent video, is this method useful for the w203 platform? they changed the Tcm but now manual mode is not engaged and the paddle shifters are off the transmission is a 722.9 nag2
My car is a w204 2012 C200 gasoline. M and A modes were added using VGSNAG2 manager, but the transmission started in 1st gear even in E mode. I didn't do a backup. What should I do to start again in 2nd gear in E mode? And is there a description file for VGSNAG2 manager?? Thanks for the help.
It depends on the adaptations and your driving style. M and A mode would not make difference on that. Mine was also starting from 2nd when I bought it, since then it’s shifting from 2nd to 1st everytime I fully stop.
@@MercGARAGE Hi, can you send it to lukaszjurys@sky.com. thanks...I am beginner in Vediamo...have sport model 2008 s211 224 bhp , perhaps agility will improve shifting gears.Thank You.Luke.
Hello, I just got my 2012 E350 with the 7 transmission (rear wheel drive only), would this work on my car? Also what kind of software do I need to code this, could you help me?
Hi, u are not alone… it did not work for me either… did all the steps 1:1. After restart - I even connected vediamo again and did read the code again - the code was the new one with „A“… but on pressing the button M (My button is only M - not the E-S or E-S-M) it did switch only between E and M. Can it be the case that my car system does not support this „A“ mode in general?
I’ve had this done to my w211 e550 m273 for a good while, holds gears just fine but I’ve realized that it automatically upshifts instead of hitting the rev limiter like amg cars. Is there any solution for this?
I had the manual mode activated on my E250 CDI 2012.
Now I can lock the transmission in ex 5th gear before overtaking a car. No sudden gearshift during acceleration.
Jumping from from 50 to 80 km zone also goes smooth in 4th.
Does it work in 4th gear. Full throttle and no auto downshift?
@@b2kbabe219 yes. But only if I avoid to activate the button under the accelerator.
@@raketjefsen no matter how fast you press it? I’m asking because I want to dyno my merc and it would auto downshift every time he gave it full throttle even without hitting the switch
Yes
Great tutorial. Have a car with the 7g+ and was interested whether could be coded to display current gear when the car is in "D"? Currently it shows only D and not D1, D2, etc. which it does when in manual mode.
Hi, I have vediamo 5 but I don't have the UnlockECU option in this folder.
great work
Thanxs bro👍
Bonjour et merci pour votre vidéo 🙏
J'ai un ML w164122 320 CDI
7g tronic 722.9 puis le faire ??
Hello, excellent video, is this method useful for the w203 platform? they changed the Tcm but now manual mode is not engaged and the paddle shifters are off the transmission is a 722.9 nag2
My car is a w204 2012 C200 gasoline.
M and A modes were added using VGSNAG2 manager, but the transmission started in 1st gear even in E mode.
I didn't do a backup. What should I do to start again in 2nd gear in E mode?
And is there a description file for VGSNAG2 manager??
Thanks for the help.
It depends on the adaptations and your driving style. M and A mode would not make difference on that. Mine was also starting from 2nd when I bought it, since then it’s shifting from 2nd to 1st everytime I fully stop.
Did you change the button to E - S - M option? I think to buy that button but is possible without it?
Actually I bought the button not yet fixed. You dont need that button. With the existing one you can operate.
Nice then I can code in this next time going to garage 👍
@@MB212 thank you for bringing us here, your videos are really well done
🤗
🙏🙏🙏
any ideas (or common problems under the valve cover) for a loud lifter like noise from one bank on a w212 2014 w/
hi, on first row it's amg, that would be the amg menu ?
do you know how to permanently disable EML in Vediamo because of new decat exhaust on w176 a45 amg ? thanks
Is 7g tronic plus or 7g tronic?
i woudld like to buy VGSANAG2 ... what's the price?
with me, there is no DJ_UnlockECU. how can i get it?
Where do you get VGSANAG2
Email id please.
@@MercGARAGE Hi, can you send it to lukaszjurys@sky.com. thanks...I am beginner in Vediamo...have sport model 2008 s211 224 bhp , perhaps agility will improve shifting gears.Thank You.Luke.
Hello, I just got my 2012 E350 with the 7 transmission (rear wheel drive only), would this work on my car?
Also what kind of software do I need to code this, could you help me?
Please contact via WhatsApp for more details.
@@MercGARAGEwhats your WhatsApp?
Can I have the unlocked VGNnag2 file?
Where can i get the vgsnag manager software ?
You can WhatsApp me
is the gearbox a 7G+ I have W212 with a 722.908 7G+ Tronic Gearbox
7G+
Not sure it's possible on the 7G
Do this also work with vedıamo 5.01.01 ?
Yes it will work.
i have E250 CDI 2012(coupe) wich has sport mode and this did not work for me.
It should be ok.
@@MercGARAGE what do mean?
@@rukako I mean it should work after coding.
@@MercGARAGE no
Hi, u are not alone… it did not work for me either… did all the steps 1:1. After restart - I even connected vediamo again and did read the code again - the code was the new one with „A“… but on pressing the button M (My button is only M - not the E-S or E-S-M) it did switch only between E and M. Can it be the case that my car system does not support this „A“ mode in general?
What do I need to get this done?
SDConnect/Openport + Vediamo
Where can i get this vgas manager?
wa.me/+353892384791
will this mode save fuel? :)
Mileage depends on how you drive. A mode is not for saving fuel. It is sport plus.
what happen if you dont have button to press?
How do you switch to S mode.
@@MercGARAGE i dont have S mode/ button (physical button)
@@Dave-kd7fo So you have only E mode in your car?
@@MercGARAGE Yes correct! will this work then?
@@Dave-kd7fo no
what is agility?
Sport +
I’ve had this done to my w211 e550 m273 for a good while, holds gears just fine but I’ve realized that it automatically upshifts instead of hitting the rev limiter like amg cars. Is there any solution for this?
Why would you want to disable that anti-idiot feature?
@@Mermasora because I want to use it for a purpose that requires brain and isn’t for idiots
Hi can you send me the vsgnag2 manger pls
Email id please
@@MercGARAGE you sent it ? You work with openport 2.0?
@@ST-lt8el Sent to where?
@@MercGARAGE you see my Email Addy?
@@ST-lt8el No
Seriously WTF is the reason for the sh*t music?!?
Where can i get the vgsnag manager software ?
Contact me via whatsapp