How to configure multiple ISP on Mikrotik with auto failover
HTML-код
- Опубликовано: 11 сен 2024
- How to configure MikroTik with two ISPs and make auto fail over. More ISPs in MikroTik. If primary down, secondary ISP automatically work. User cannot get any interruption for Internet.
Very useful thing sir... Thanks... May God bless you
OMG, thank you!! This is like the first tutorial out of like 8 that has actually worked!
Giorgos Tsoukalis brought up a good point though, it actually does make sense. Has anyone found a work around for this?
Thanks for ur valuable comments
Great tutorial, really easy to understand. Just subscribed.
It's great techmonowar. Bonding with failover are working great.
Nice tutorials. thanks for sharing.
Great, it helped me, to solve my major issue, thank you very much
Good Manual thanks man!!! its Just works!
Great tutorial! Helped me a lot!!
Very good and useful tutorial. Thanks a lot
where did you use routing mark to_ISP1 and 2? you missed it. you should have set them on the routes separately.
So Great 🙏 Explain
Thank you so much for your video.I have some questions to ask:
1.what is the relevance of mangle? i was hoping you would apply the "mark routing": "To_isp1" and "To_isp2" to the ip route for each isp
2. When you set up the prerouting ,you selected the lan as the in interface,what if there are vlans? will you create prerouting for each vlan or just for the physical interface?
Thanks it was really interesting and helpful
Thanks for your valuable comments.
What I can do in situation when gateway responds, but there is no internet connection behind it? I'm using LTE modems as gateways.
Great brother
hello i wanted to ask if i can combine two WAN connections in order to increase the speed and have auto failover? I have one DHCP WAN connection and one PPPoE connection please guide
I am pretty sure you can just add one gateway and change the Distance value. You don't need all those steps.
@matthew earl Where to add Distance.. And witch steps from this video are enough for auto fail over to work?
Is the DNS part required and why? I have DHCP on both WAN connections, it works, but I have manual failover.
very nice,thanks
How do you configure if more than 2 ISPs say i am going to use CCR1036-8G-2S+ and i use 6 ISP connection to have more bandwidth if all six are working and drop interfaces when a link outage happens?
Need your help...
you are the best!! :D
great but when wan-1 timeout or latency high 500ms i need policy automatically change route from Wan-1 to wan-2
hi. thanks for your video. I have a microtik RB4011iGS+RM. But all the ports are in slave. Only ethernet 1 port is in master port. How to convert ethernet port 2 from slave to master??
Hi, I'm from Malaysia thank you for your clear and perfect tutorial,
I have a favor,
I'm using Mikrotik with 2 isp(PPPoE) and 2 LAN,
here I want to separate the connection between lan and wan,
lan1 connected to wan1 and lan2 connected to wan2...
also, I want to make a failover, if any ISP connection down, it(LAN) will automatically reroute to another one isp.... and if the isp backs to run normally again, the lan routed to wan that has already assigned before.
I'm still new with Mikrotik and yeah I'm noob with mangle rule
hope you can help me thank you
dah dapat answer bro?aku x expert network but kalau ikutkan ko ckp nk seperate connection tu,kena pakai VLAN aku agak. buat 2 seperate vlan for 2 seperate network.
thanks
how to configure One wan for Internet and another for vpn?
please help me
this is not auto fail over , if the first ISP is down (only the internet and not the link) mikrotik will try to pass the traffic thru ISP1 , you have to unplug the cable to pass the traffic thru the ISP2.
Thanks for your comments
Ok, so what is the solution? Or is there a work around???
So noob here, and I tried this with 3 WAN. I disconnected my modem cable (not the ethernet cable from the modem to the mikrotik router). The ethernet link from the mikrotik router to my modem was active.
The internet switched. I am still curious to know if the above statement is true and what I have done differently that it worked for me.
Again absolute noob, been 2 days with a router board. Using a hAP ac2.
Two methods I tried.
Disconnecting the Ethernet
Disconnecting the Fibre/coax to the modem.
Both worked
very very usefull video... can you plz guide how to configure two network as well,
one data link is comming from other bulilding ( 172.16.0.0/16
my netwrok is 172.29.11.1/24
i want these two to share servers and transfer files
will it auto-fail back (auto-restore link when back online) ?
in this case. yes. 1st isp distance was set to 1
I interesting
it is not working when ISP is down in cloud
Well brother tell me which microtik router model you configuring in this video
2011
Sir how to know what number to assign for IP address ex. isp1 115.127.34.91/29 and how to choose your gateway ex. 115.127.34.89?
For information... u can use jodies.de/ipcalc to find out network, broadcast, 1st IP, last IP etc. For gateway ... ISP give you the gateway depending on their setting.
hi, can i have your email address? just want to ask help about our mikrotik configuration here in our office
techmonowar@gmail.com
Full video on ruclips.net/user/shortsnoBlf2eZ7wg?feature=share