I don't think people realize how much architecture and engineering play apart of this not to mention being a true artist. Beautiful job you're worth every penny you charge!
Nice job I find the Tacktight strip from clockwork components good as it is foam backed so less chances of damage to the fabric. Look forward to your next project
Hello Darren of Alo upholstery .I have a question for you .I am reupholstering my dining room chairs, they have the high back which is arched, it has the cording going around the arch on the back of the chair, but it is visible in the front of the chair and the back is flat ,so it looks like a cathedral window in a church.but my question is about the seating. the seat cushion drapes over the edge of the chair, on the sides and front. I want to redo the cushions, but I don't want them to drape over. I want the seat cushion to be firm so when you sit down it is comfortable. When I go to reupholster the seat cushion ,do I trim back the MDF board because it's chipping away ? Or do I trim the foam about 1/2 inch back when I cut it and then go ahead and staple the batting on the mdf board or do I leave it the actual size that it is? I'm really having a hard time with it. Also instead of putting the cording back around the arch on the back cushion, could I put those little nailheads around the arch and have that as the trim, or just reuse the cording on the chair?
шикардос = лайк !!! я смотрю каждый выпуск . и у меня назрели вопросы . как вы делаете разметку для каретной стяжки ? как вы рассчитываете на фанере и с каким учетом на материале с поправкой на толщину поролона . а пуговицы затягиваются до конца к фанере? отверстие в поролоне под пуговицу ,нужно в размер ровно в размер пуговиц или меньше или больше и на сколько правильно ))) .? спасибо вам за видео shikardos = Like !!! I look at each issue. and I have matured issues. how you are doing layout for Karetnaya ties? how do you expect on the plywood and with regard to how the material adjusted to the thickness of the foam. and the buttons are tightened through to the plywood? hole in the foam rubber under the button, you need to size exactly the size of buttons, or less or more, and how much is correct))).? Thank you for the video
If the fabric was leather would you do it piece by piece section by section also? Planning to do it for my dining chair. Would it be possible for me to show you and ask you for some pointers ?
I realize you do the jobs that your customers want. With that being said, somewhere down the road in 40 or 50 years, someone will take off all that fabric and "restore" the chair to its original condition.
David Collier I never realized how much went into this. I’ve done the seats on my dining room chairs myself, which is easy, but another chair I had reupholstered was $950 to have it done.
Muy bien, solo que te faltaron 4 cosas. Que nos pongas títulos en español y acerques la cámara para saber que le echas a los cojines, (no todos leemos inglés) dos, de dónde sacaste la tela con la orilla que le pusiste a la silla? tres al final te faltó tela, se ve el cartón y 4 no pongas títulos porque no se vio como cortaste la tela para acomodarla en la parte de atrás porque pusiste un título, ponlo al principio y deja ver todo el procedimiento.
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
I need that nail gun! It is so satisfying to watch.
This man is incredibly skilled and talented!
I don't think people realize how much architecture and engineering play apart of this not to mention being a true artist. Beautiful job you're worth every penny you charge!
Your talent is amazing!! I wish you did workshops 😁
one of the best upholsterers ive seen
Much work but end effect is great.
Like!
your work is of high stamdard and satisfied love it. keep on teahing us
Wao ese trabajo quedo preciosos y elegantes
Eccellente lavoro, bravo
Luv to watch your work!!!!
Excelente video buen trabajo Biutiful
Mashallah excellent job very elegant I love your work
Excellent.
Fantastic job!
Wow exelente trabajo !!!!👏👏👏👏👍
Yesss thank you so much! Love this, super helpful
CONGRATS MASTER!!!!!!!!!!!!!!!!!!!!!!!!!!!!!CHAPEAU!!!!!!!!!!!!!!!!!!!!!
learning more with every one of your videos watched... many thanks
You're such a perfectionist, I love that. Great job!
Nice job I find the Tacktight strip from clockwork components good as it is foam backed so less chances of damage to the fabric. Look forward to your next project
Fabulous just that simple
What kind of adhesive did you usi in your spray gun? Thanks .
Золотые руки!
👌👍excelente!
Very good work like this good laik
thank you :)
You're welcome!
Amazing job.
Inspiring!!!!
Ty!!!
Love your work beautiful and clean finished.question what is the best fabric to use for a chair or sofa .thanks hello from New York
it should be upholstery fabric.
Darren
Una consulta maestro cuanto trabaja de presión de aire la engranpadora espero su contestación gracias
Saludos desde chiclin la libertad Trujillo Peru
I love your videos, what kind of glue have you used? what kind of foam do I need to do it? thank you very much, you are so talented, thank you :)
Hello Darren of Alo upholstery .I have a question for you .I am reupholstering my dining room chairs, they have the high back which is arched, it has the cording going around the arch on the back of the chair, but it is visible in the front of the chair and the back is flat ,so it looks like a cathedral window in a church.but my question is about the seating. the seat cushion drapes over the edge of the chair, on the sides and front. I want to redo the cushions, but I don't want them to drape over. I want the seat cushion to be firm so when you sit down it is comfortable. When I go to reupholster the seat cushion ,do I trim back the MDF board because it's chipping away ? Or do I trim the foam about 1/2 inch back when I cut it and then go ahead and staple the batting on the mdf board or do I leave it the actual size that it is? I'm really having a hard time with it. Also instead of putting the cording back around the arch on the back cushion, could I put those little nailheads around the arch and have that as the trim, or just reuse the cording on the chair?
Perfecto
Buenas como se llama esa lámina con taches que coloca atrás en el espaldar gracias
Great piece of work! Youre an inspiration to me, I am also an upholsterer in the Philippines, and I uploaded videos of my work.
шикардос = лайк !!! я смотрю каждый выпуск . и у меня назрели вопросы . как вы делаете разметку для каретной стяжки ? как вы рассчитываете на фанере и с каким учетом на материале с поправкой на толщину поролона . а пуговицы затягиваются до конца к фанере? отверстие в поролоне под пуговицу ,нужно в размер ровно в размер пуговиц или меньше или больше и на сколько правильно ))) .? спасибо вам за видео
shikardos = Like !!! I look at each issue. and I have matured issues. how you are doing layout for Karetnaya ties? how do you expect on the plywood and with regard to how the material adjusted to the thickness of the foam. and the buttons are tightened through to the plywood? hole in the foam rubber under the button, you need to size exactly the size of buttons, or less or more, and how much is correct))).? Thank you for the video
Amei!
If the fabric was leather would you do it piece by piece section by section also? Planning to do it for my dining chair. Would it be possible for me to show you and ask you for some pointers ?
🤩🤩🤩👍👍👍💕💕💕
hi bosch rubber couter link and Price
👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏
👏👏👏
Saludos desde México San Luis Potosí, me gustaría tapizar como tu...esperoe entiendas
How many times have you stapled your fingers?
Ive done it twice.. thank you for watching.
Darren
I realize you do the jobs that your customers want. With that being said, somewhere down the road in 40 or 50 years, someone will take off all that fabric and "restore" the chair to its original condition.
😢shhhn
Умеют же люди портить шедевры!
Взял массив и испоганить...
No wonder it cost so much to reupholster my chair.
people don't appreciate the work that goes in
David Collier I never realized how much went into this. I’ve done the seats on my dining room chairs myself, which is easy, but another chair I had reupholstered was $950 to have it done.
Why why why poor chair
Испортил хороший стул
Muy bien, solo que te faltaron 4 cosas. Que nos pongas títulos en español y acerques la cámara para saber que le echas a los cojines, (no todos leemos inglés) dos, de dónde sacaste la tela con la orilla que le pusiste a la silla? tres al final te faltó tela, se ve el cartón y 4 no pongas títulos porque no se vio como cortaste la tela para acomodarla en la parte de atrás porque pusiste un título, ponlo al principio y deja ver todo el procedimiento.