Saw your video, really like your video, so decided to do it myself. The only one nut I'm facing problem is the one below on the battery side. The bottom nut is so hard to unscrew. How you manage to take it off so easily?
i can't really remember since its been awhile but looking at it..... i probably took the bottom bolt out from under the car using a long extension and a long bar for leverage.
Thanks bro, thanks for sharing this : ) hopefully I can change mine soon. Can’t tahan the vibrate sound anymore XD I did notice you use the jack to support the engine, what do you recommend if anyone is without the jack? And may I know what is the tools you are using? So that I can just buy what is needed, or just buy a set of wrench. Anyway, the kiddo so cute!! Again, thanks!
you can use the scissor jack that comes with the car to lift the engine a bit when bolting the new mount in. Not necessary to have a hydraulic jack. Go to Mr.DIY and get a set of ratchet socket wrench. Should come in size of 10mm till 24mm, that is very useful for both car DIY and home DIY. And a rubber mallet is helpful as well to loosen very tight bolts.
I got it off Shopee. The original link no longer works but just search for OEM Myvi engine mount. Don't choose the cheapest. Go somewhere in between unless you want to splurge on original mounts.
Hey bro, planning to buy one set engine mounting, how to know genuine product from shopee? Plus some seller selling the mouting right side without the top metal thing that attached tgt with mounting in your video.
There was no brand stated by the seller but he claims it is Original Perodua. Link below. So far so good, no issues with it. shopee.com.my/product/11737756/883418138
i ask workshop. they put the price for changing the engine mouting rm700+ . i saw shopee just 250 set of mounting. thank for the video.will do by myown
hi, may I know how to differentiate original and not original engine mounting? I changed my engine mounting in Feb2022(rm300+) and the vibration still persists. So,I went to another workshop and they claim my engine mounting wasn't original. And, they changed it again today,engine mounting plus gearbox mounting (rm700) barely 5 months into use..
Did the 2nd set of mount solve your problem? If they don't then your 2nd workshop most likely slaughtered your wallet. Okay, any quality of mounts also should not fail immediately after installation. Even the cheapest of all mounts should last you AT LEAST a year. If vibration still persists then its most likely the 1st workshop didn't do a good job installing the mounts (incorrect installation or wrong torque applied during installation) How to differentiate original and non original..... this is highly subjective and most of the time you will need both next to each other to determine which feels and looks superior than the other.
Very good presentation. Straight to the point. No wasting time and easy to understand. Keep it up my friend!
Very Well Explained Brother , explanation was very precise ,Keep it up
Very detailed review about the old engine mounting. Thank you kind sir!
请问mounting 的螺丝用手扭紧就可以了？
I like the "this is sayonara" part. 😆
Hi, did you manage to find out the torque specs for the bolts?
Thank you brother very nice and clear video
Look easy but i wont change myself as i didn't have any experience. This still a good info for my knowledge. Thumb up for the vid
Even if you are not changing it yourself, at least now you have the knowledge and won't get scam by the workshop.
Good info. Might try diy mine as well. Awwww the little one so cute
Saw your video, really like your video, so decided to do it myself. The only one nut I'm facing problem is the one below on the battery side. The bottom nut is so hard to unscrew. How you manage to take it off so easily?
i can't really remember since its been awhile but looking at it..... i probably took the bottom bolt out from under the car using a long extension and a long bar for leverage.
Thanks bro, thanks for sharing this : ) hopefully I can change mine soon. Can’t tahan the vibrate sound anymore XD
I did notice you use the jack to support the engine, what do you recommend if anyone is without the jack? And may I know what is the tools you are using? So that I can just buy what is needed, or just buy a set of wrench.
Anyway, the kiddo so cute!!
Again, thanks!
you can use the scissor jack that comes with the car to lift the engine a bit when bolting the new mount in. Not necessary to have a hydraulic jack. Go to Mr.DIY and get a set of ratchet socket wrench. Should come in size of 10mm till 24mm, that is very useful for both car DIY and home DIY. And a rubber mallet is helpful as well to loosen very tight bolts.
threadlocker actually makes it harder.
if you want it easier, it is called anti-seize
Thanks I gain the knowledge
Where to get the mounts?
I got it off Shopee. The original link no longer works but just search for OEM Myvi engine mount. Don't choose the cheapest. Go somewhere in between unless you want to splurge on original mounts.
Bro, at this time. What is the car mileage
what is that aluminium thing at the beginning of video for ?
his rubber stop is broken so diy a stopper.
Yes, its actually a firm sponge that has aluminium backing. Without it, the bonnet vibrates and makes an annoying squeaky noise
Hey bro, planning to buy one set engine mounting, how to know genuine product from shopee?
Plus some seller selling the mouting right side without the top metal thing that attached tgt with mounting in your video.
Hi, can you share where to get the spare parts, and is it apply to Myvi SE 1.5 (2013) model as well?
thanks
I got it from Shopee
shopee.com.my/product/11737756/883418138
Not too sure if its the same as Myvi SE 1.5.
Hey bro, what brand did you used? I can see the extra support at the rear mounting (the bone shape one). Which brand would you recommend?
There was no brand stated by the seller but he claims it is Original Perodua. Link below. So far so good, no issues with it.
shopee.com.my/product/11737756/883418138
i ask workshop. they put the price for changing the engine mouting rm700+ . i saw shopee just 250 set of mounting. thank for the video.will do by myown
Yes, the purpose of my DIY videos is so that we can save some money.
hi, may I know how to differentiate original and not original engine mounting? I changed my engine mounting in Feb2022(rm300+) and the vibration still persists. So,I went to another workshop and they claim my engine mounting wasn't original. And, they changed it again today,engine mounting plus gearbox mounting (rm700) barely 5 months into use..
Did the 2nd set of mount solve your problem? If they don't then your 2nd workshop most likely slaughtered your wallet.
Okay, any quality of mounts also should not fail immediately after installation. Even the cheapest of all mounts should last you AT LEAST a year. If vibration still persists then its most likely the 1st workshop didn't do a good job installing the mounts (incorrect installation or wrong torque applied during installation)
How to differentiate original and non original..... this is highly subjective and most of the time you will need both next to each other to determine which feels and looks superior than the other.
Thanks bro for knowledge 👍
You are welcome. Glad to know people can learn from my videos.
How much the kos...
Ya lor, how much ahh pomen charge?
Kos beli barang saja...kalau p kedi cas lg mahal o...bgs sendiri buat
ask the pomen rm700+ .at shopee .set of item only rm250
What brand is this mounting?
I got it off shopee and it says its original perodua.
shopee.com.my/product/11737756/883418138
Good Like bosku
Got it tqvm
Cool bro
do auto and manual Myvi have different mount or they are same?
my Manual 2007 .... vibration for allost a year plus 🥲
manual and auto are different mounts.