Came across the video while looking for deepcool ch360 case videos. Watched it completely, and honestly, this video is so underrated! Absolutely loved it!
I genuinely found that enjoyable to watch! The music was amazing, almost captivating! Building computers is hella fun, this video really portrays that. When I built my PC, there were some problems I had. For instance, the floppy drive didn't work properly dure to a misaligned connector, and then I didn't seat my RAM correctly. All was fixed in the end. I'm still hoping you get that Discord server up and running. It would be fun for us all to share our PC builds with you.
I had a feeling you were gonna Upload. This build is nice. Great video. Great music choices. The voice over is top notch. Great job bud! Did I mention this is great?
I shot this video over 2 months ago lol. Work got crazy busy and I didn't have any time to edit the footage. Work life is back to normal, so its time to start with the vids again. Grinded out the editing on this one over the last couple of days to finally get it done. New build starts tomorrow. I'm thinking either the north xl or 011 vision...not sure yet but leaning towards the north xl.
@@Renegade_Rabryn I love the North cases. They are so damn classy. Wood in a PC case? Really? lol So nice. I would build in the North XL. There are millions of videos on the O11 Vision. Just my opinion.
@williamholmes8339 there was a white one available in my city, but I want the black one. Just ordered. It'll take a few days to ship, so in the meantime I'll make a build video in the corsair 2500d that I have sitting here.
I was considering the non-M version of this board for the 7800X3D. During my research, I came across a lot of negative feedback on Reddit and Amazon regarding quality control issues, bugs, and other problems. Could you please share your experience with this board?
I could be completely wrong - but did you put in the front panel HD LED connector to the wrong pins? I looked up your motherboards manual and it indicates that the hard drive activity led is connected on the bottom left two pins - only curious because I have a similar front panel pin layout as yours and that's how i connected them - otherwise the power sw is in the correct spot
Great looking PC and yes some one who likes the Black Build with just enough RGB to show off its cool esthetics. the whole White PC thing is just so.... here for today gone tomorrow but Black is here to stay. Deepcool is on such a roll now like a completely different company from a few years ago.
Does this MB have memory OC recovery? I am still regretting buying a Aorus MB for my AM4 due to black screen when it does not like the memory sets. Also don't spend money on Windows, get better RAM and play with it, learn optimization.
Hello, I am planning to buy this case, but I intend to add 1 additional argb case fan up top as Exhaust, directly above my CPU Air Cooler. May I know if it's still possible to plug it with the rest of the fans to the rgb controller? Or will it be connected to the motherboard? Would be nice if it could join with the rgb controller, so that I could also control its lights together with the rest of the fans.
Hey mate, amazing video. Loved it my favorte on YT by far. I am buying this case, but torn on matx vs atx. I'll get either with the digital version. The ATX is on sale making it the same price as the micro right now, but i love the micro form factor. It's crazy because I bought all the parts but the case and it just so happens I'm using the 7600x and exact same Mobo. It's like a sign its mean tto be. I put most of the budget into a 4080 super. Next year I will uprade the 7600x to a 9800x3d. But only if needed. Anyway, looking forward to your insight. Thanks! EDIT: Big question regarding the fans, is it okay or safe to plug the 3 fans daisy chained into 1 4-pin header onthe mobo? lastly you said it feels a bit cheap, what would you recommend in the microatx space around this price?
This case is only micro atx. Atx will not fit. My favorite micro atx case I've built in is the ap201 from asus. Deepcool is good but to me it just feels cheap but if you like it, go for it. You'll be fine daisy chaining three fans into one 4pin on the mobo
@@Renegade_Rabryn Thank you! Great feedback appreciated. I was referring to the ATX version of the case CH560. Either way, they are both on sale but I'm leaning for the CH360. Thanks agian!
Word on the street is you are not buying this case, aren’t torn between matx vs atx, you will not be getting the digital, the atx isn’t on sale right now and is not the same price, you do not love the micro form factor, you didnt buy all the parts, you aren’t using 7600x, you didnt buy a 4080 super, you will not upgrade to a 9800x3d, and it is not okay to daisy chain - it will blow up your house. I would recommend using an amazon box as a case.
damn we almost have the same parts that i would be building soon, just the difference in the cpu which i will be picking the ryzen 5 7500f paired with the thermalright/arctic cpu coolers.
There's plenty of videos without music by other builders you can watch. I'm going to continue to use music in my videos as I quite enjoy it. Thanks for watching.
![КОРПУС с ГРАДУСНИКОМ за фуллпрайс [ DEEPCOOL CH560 DIGITAL ]](http://i.ytimg.com/vi/WmHrrcixNaI/mqdefault.jpg)
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
This was one of the most epic sci fi films I’ve ever seen
🚀
Came across the video while looking for deepcool ch360 case videos.
Watched it completely, and honestly, this video is so underrated!
Absolutely loved it!
Very high quality video, you deserve more subscribers.
I genuinely found that enjoyable to watch! The music was amazing, almost captivating!
Building computers is hella fun, this video really portrays that. When I built my PC, there were some problems I had. For instance, the floppy drive didn't work properly dure to a misaligned connector, and then I didn't seat my RAM correctly. All was fixed in the end.
I'm still hoping you get that Discord server up and running. It would be fun for us all to share our PC builds with you.
18:49, what does this thing do ?
This Video is so Well done that Felt i was Watching a High Quality Movie, the Chosen Music made allot of Difference
I understand that you don’t need to apply thermal paste?
I had a feeling you were gonna Upload. This build is nice. Great video. Great music choices. The voice over is top notch. Great job bud! Did I mention this is great?
I shot this video over 2 months ago lol. Work got crazy busy and I didn't have any time to edit the footage. Work life is back to normal, so its time to start with the vids again. Grinded out the editing on this one over the last couple of days to finally get it done. New build starts tomorrow. I'm thinking either the north xl or 011 vision...not sure yet but leaning towards the north xl.
@@Renegade_Rabryn I love the North cases. They are so damn classy. Wood in a PC case? Really? lol So nice. I would build in the North XL. There are millions of videos on the O11 Vision. Just my opinion.
@williamholmes8339 there was a white one available in my city, but I want the black one. Just ordered. It'll take a few days to ship, so in the meantime I'll make a build video in the corsair 2500d that I have sitting here.
@Renegade_Rabryn The 2500d is a nice PC case. Looking forward to the build. 👌
Very nice video, but why does the background music have to be so suspenseful? lol
True
Prepares for Silent Hill 2 remake.
Cause we're building PCs niqqa
Because he said so
I was thinking the same, not sure if something bad or scary was about to happen 😅
I was considering the non-M version of this board for the 7800X3D. During my research, I came across a lot of negative feedback on Reddit and Amazon regarding quality control issues, bugs, and other problems. Could you please share your experience with this board?
I could be completely wrong - but did you put in the front panel HD LED connector to the wrong pins? I looked up your motherboards manual and it indicates that the hard drive activity led is connected on the bottom left two pins - only curious because I have a similar front panel pin layout as yours and that's how i connected them - otherwise the power sw is in the correct spot
Great looking PC and yes some one who likes the Black Build with just enough RGB to show off its cool esthetics.
the whole White PC thing is just so.... here for today gone tomorrow but Black is here to stay.
Deepcool is on such a roll now like a completely different company from a few years ago.
looks much more sick withot side pannel, if it had full transparent pannel option i would get it instead
Does this MB have memory OC recovery? I am still regretting buying a Aorus MB for my AM4 due to black screen when it does not like the memory sets.
Also don't spend money on Windows, get better RAM and play with it, learn optimization.
i love your narration
where do you buy this case?
19:05 Yes this was Allot Enjoyable than a Top well known Channel Like the VERGE Geezas
Hello, I am planning to buy this case, but I intend to add 1 additional argb case fan up top as Exhaust, directly above my CPU Air Cooler.
May I know if it's still possible to plug it with the rest of the fans to the rgb controller?
Or will it be connected to the motherboard?
Would be nice if it could join with the rgb controller, so that I could also control its lights together with the rest of the fans.
Yep you can add rgb to controller
This is good stuff Rabryn 👍
👍
This is a great video! Looking at a similar setup. Did you use thermal paste for the cpu and fan?
The paste is pre applied to the cooler.
@@Renegade_Rabryn thanks. good to know. I got the deepcool ak500 so will not need to apply for my case as well, I think
Hey mate, amazing video. Loved it my favorte on YT by far. I am buying this case, but torn on matx vs atx. I'll get either with the digital version. The ATX is on sale making it the same price as the micro right now, but i love the micro form factor. It's crazy because I bought all the parts but the case and it just so happens I'm using the 7600x and exact same Mobo. It's like a sign its mean tto be. I put most of the budget into a 4080 super. Next year I will uprade the 7600x to a 9800x3d. But only if needed. Anyway, looking forward to your insight. Thanks! EDIT: Big question regarding the fans, is it okay or safe to plug the 3 fans daisy chained into 1 4-pin header onthe mobo? lastly you said it feels a bit cheap, what would you recommend in the microatx space around this price?
This case is only micro atx. Atx will not fit. My favorite micro atx case I've built in is the ap201 from asus. Deepcool is good but to me it just feels cheap but if you like it, go for it. You'll be fine daisy chaining three fans into one 4pin on the mobo
@@Renegade_Rabryn Thank you! Great feedback appreciated. I was referring to the ATX version of the case CH560. Either way, they are both on sale but I'm leaning for the CH360. Thanks agian!
Word on the street is you are not buying this case, aren’t torn between matx vs atx, you will not be getting the digital, the atx isn’t on sale right now and is not the same price, you do not love the micro form factor, you didnt buy all the parts, you aren’t using 7600x, you didnt buy a 4080 super, you will not upgrade to a 9800x3d, and it is not okay to daisy chain - it will blow up your house. I would recommend using an amazon box as a case.
@@riazali4362word on the street is you aren’t leaning towards the CH360
@@NahBNah jokes xD went with the digital
nice content, what camera d'you use?
This one was shot with a canon r6.
Excellent video quality, but I don't agree with your RAM advise. Lower latecy and XMP/EXPO certified kits will save you from a lot of hassle.
I've had zero hassle with this ram strategy. Thanks for the comment and watching the video.
what about CPU bottleneck?
nahh 7800 xt and 7900 gre works perfect with minimal bottlenecks.
great video very nice build i really like the mobo
It's a nice mobo. I did have some trouble with the Gigabyte Control Center software inside windows...was very buggy.
what's the max gpu length on this case?
320
damn we almost have the same parts that i would be building soon, just the difference in the cpu which i will be picking the ryzen 5 7500f paired with the thermalright/arctic cpu coolers.
Very nice build thanks for sharing
Hello , supports AIO 360MM?
Yep in the front
@@Renegade_Rabryn thanks you
2:22 wtf are u saying? CL.36 is trash compared to CL.30
The only kit worth buying for AM5 is 6000MHz CL.30 or 6400MHz CL.32
7800 XT over 7900 GRE?
If I was redoing this build, I'd choose the 7900gre
I wish they would stop with the magnetic dust filters. It just makes the case look and feel cheap.
Incorrect
Another enjoyable video.
Glad you enjoyed it
I will be using this case with a ryzen 7600x and a rtx 4060 for my first build.
Good choice
This is a cool video - helpful and informative. But, friend, your narration sounds so angry.
It's ok, the narration can't hurt you.
Why use a legit copy of windows? There is keys for less then 20$
Great vid tho, nice build.
please don't use background music
There's plenty of videos without music by other builders you can watch. I'm going to continue to use music in my videos as I quite enjoy it. Thanks for watching.
Please always use background music!
wrong hole 😂😂😂
gpu sag😂