How many people got to see or smell the magic smoke using this schematic? Anyway, the author did mention in the description to use separate phone chargers for each of the TP4056 units. Using separate phone chargers are isolated the TP4056 boards from each other (each gets their own isolated ground place). As long as no one decided to combine into a single or non isolated power supply for all three TP4056, it should work
@@BeWolf.It's not current u need here, isolated supply. So that one module negative will not short to other module negative. If u use single supply, all negative will short to positive. Check the circuit properly.
it will short the ground. because the minus of battery one is connect to the positive of the second one. If you plug charging cable of module 4056 from the same port (common ground) it will blow up.
This experiment need explanation, tp4056 module doesn't meant to be use for series charging because its share common ground between the b minus and the gnd terminal, if done with this configuration its better using a transformer with 3 different output so it doesn't short the tp4056, i once burn a circuit using 3 series tp4056
Anyway by applying 4.2x battery count voltage to serially connected batteries charges them all. But it still need circuit to track charged ones . And it seems multi battery chargers use some kind of resistor to discharge chatged one ie puts some resistor to plus and negative of charged batterys plus and minus ie using zener diode therefore itll stop charging while itll flow electricity to oher discharged ones. But im not sure how they handle excess woltage which this procedure might cause ;p
@@easytechzones Thanks for information. And when I charge 2s battery pack, then why I'll input power at both 1s & 2s charging circuit? Please answer....
@@akbarquadir8719 for 2S mean 4,2V x 2 = 8,4 V . At least 2 x 5 V power supply is necessary. And if you look at the circuit for one battery first tp4056's negative is connected to 2S negative, second tp 4056' positive is connected 2S positive and two tp4056's bat - and bat + connection point is connected 2S battery pack two battery + - connection. Thats why two power supply are necessary.
Simple Build just 1 TP4056 for each Battery connected in series, Both 18650 and TP4056 are in parallel, While the 3 sets are in series. Downside of it is to use Three 5v Cellphone charger. Simple but effective and Good
Why the positive comment? He is being deceptive. There is NO 2S or 3S charger. There is no in-circuit charging, either. This is something I would expect from a 8 year old.
Why the positive comment? He is being deceptive. There is NO 2S or 3S charger. There is no in-circuit charging, either. This is something I would expect from a 8 year old.
Why the positive comment? He is being deceptive. There is NO 2S or 3S charger. There is no in-circuit charging, either. This is something I would expect from a 8 year old.
Basically all I want is a balance charger that can charge 24 batteries. Can I just use a 12s BMS with balance? The batteries would be arranged in 4 pack sections.
Why the positive comment? He is being deceptive. There is NO 2S or 3S charger. There is no in-circuit charging, either. This is something I would expect from a 8 year old.
@@easytechzones i have purchased a 3.7 v 320 mah lithium polymer lipo rechargeable battery; showing 0 v with multimeter, > but it does not charging with tp 4056> what is the solution ?
@@SAHILKHAN-lu8oq 1 more question can we charge it with dc to dc step up module by setting 7.4 volt for 2s 7.4v battery it will be not overcharged right or it will is it safe or not pls answer 🙏
Why the positive comment? He is being deceptive. There is NO 2S or 3S charger. There is no in-circuit charging, either. This is something I would expect from a 8 year old.
Why the positive comment? He is being deceptive. There is NO 2S or 3S charger. There is no in-circuit charging, either. This is something I would expect from a 8 year old.
You must use an independent power suply for each module like he did in the video. If you connect them all together to use 1 powersuply then it will short out
Why the positive comment? He is being deceptive. There is NO 2S or 3S charger. There is no in-circuit charging, either. This is something I would expect from a 8 year old.
Saran: lem jangan mengenai IC atau konektor karena dapat menyebabkan fungsi modul tidak maksimal atau tidak akurat dalam mengkalibrasi baterai catatan: sesuai jenis lem yang akan digunakan Suggestion: don't get glue on the IC or connector because it can cause the module to function not optimally or inaccurately calibrate the battery Note: according to the type of glue to be used
Why the positive comment? He is being deceptive. There is NO 2S or 3S charger. There is no in-circuit charging, either. This is something I would expect from a 8 year old.
Why the positive comment? He is being deceptive. There is NO 2S or 3S charger. There is no in-circuit charging, either. This is something I would expect from a 8 year old.
Why the positive comment? He is being deceptive. There is NO 2S or 3S charger. There is no in-circuit charging, either. This is something I would expect from a 8 year old.
Why the positive comment? He is being deceptive. There is NO 2S or 3S charger. There is no in-circuit charging, either. This is something I would expect from a 8 year old.
Why the positive comment? He is being deceptive. There is NO 2S or 3S charger. There is no in-circuit charging, either. This is something I would expect from a 8 year old.
Why the positive comment? He is being deceptive. There is NO 2S or 3S charger. There is no in-circuit charging, either. This is something I would expect from a 8 year old.
Why the positive comment? He is being deceptive. There is NO 2S or 3S charger. There is no in-circuit charging, either. This is something I would expect from a 8 year old.
Why the positive comment? He is being deceptive. There is NO 2S or 3S charger. There is no in-circuit charging, either. This is something I would expect from a 8 year old.
Why the positive comment? He is being deceptive. There is NO 2S or 3S charger. There is no in-circuit charging, either. This is something I would expect from a 8 year old.
Why the positive comment? He is being deceptive. There is NO 2S or 3S charger. There is no in-circuit charging, either. This is something I would expect from a 8 year old.
Why the positive comment? He is being deceptive. There is NO 2S or 3S charger. There is no in-circuit charging, either. This is something I would expect from a 8 year old.
Why the positive comment? He is being deceptive. There is NO 2S or 3S charger. There is no in-circuit charging, either. This is something I would expect from a 8 year old.
Why the positive comment? He is being deceptive. There is NO 2S or 3S charger. There is no in-circuit charging, either. This is something I would expect from a 8 year old.
Why the positive comment? He is being deceptive. There is NO 2S or 3S charger. There is no in-circuit charging, either. This is something I would expect from a 8 year old.
How many people got to see or smell the magic smoke using this schematic?
Anyway, the author did mention in the description to use separate phone chargers for each of the TP4056 units. Using separate phone chargers are isolated the TP4056 boards from each other (each gets their own isolated ground place).
As long as no one decided to combine into a single or non isolated power supply for all three TP4056, it should work
You can use a single source, as long as it is 5v and has 4 or 5 amper, so you will be able to deliver the ideal current for the tp4056. 🤷🏻
@@BeWolf.It's not current u need here, isolated supply. So that one module negative will not short to other module negative. If u use single supply, all negative will short to positive. Check the circuit properly.
@@BeWolf.U can't
it will short the ground. because the minus of battery one is connect to the positive of the second one. If you plug charging cable of module 4056 from the same port (common ground) it will blow up.
U r right
Super bro good luck❤😊
This experiment need explanation, tp4056 module doesn't meant to be use for series charging because its share common ground between the b minus and the gnd terminal, if done with this configuration its better using a transformer with 3 different output so it doesn't short the tp4056, i once burn a circuit using 3 series tp4056
It must get it's isolation from step down transformers in the 5 volt power supplies otherwise yes it will short out.
Khub bhalo dada
Thanks
Hallo can i ask is it necessary to connect the charging board on series if they need an isolated power supply
Anyway by applying 4.2x battery count voltage to serially connected batteries charges them all. But it still need circuit to track charged ones . And it seems multi battery chargers use some kind of resistor to discharge chatged one ie puts some resistor to plus and negative of charged batterys plus and minus ie using zener diode therefore itll stop charging while itll flow electricity to oher discharged ones. But im not sure how they handle excess woltage which this procedure might cause ;p
It would be nice to have a little explanation with symbols
Kya bms ke bina bettery pack charge kar sakte he
yes
Ek shath bono charaj nahi ho sakte kay
Ok
thanks
At a time I used the all port of 1s, 2s & 3s battery charge same time, is it possible at this product?
Single battery will charge at a time. Not multiple
@@easytechzones
Thanks for information.
And when I charge 2s battery pack, then why I'll input power at both 1s & 2s charging circuit?
Please answer....
@@akbarquadir8719 it can be done with transistors like h bridge like techniques. but seems like noone did this for youtube ;/
@@akbarquadir8719 for 2S mean 4,2V x 2 = 8,4 V . At least 2 x 5 V power supply is necessary. And if you look at the circuit for one battery first tp4056's negative is connected to 2S negative, second tp 4056' positive is connected 2S positive and two tp4056's bat - and bat + connection point is connected 2S battery pack two battery + - connection. Thats why two power supply are necessary.
No
Simple Build just 1 TP4056 for each Battery connected in series, Both 18650 and TP4056 are in parallel, While the 3 sets are in series. Downside of it is to use Three 5v Cellphone charger.
Simple but effective and Good
Not feeling good about shorting (+) (-) Batt connection on charging board...
Explanation would be better...
同じ様な構成で組んだことがありますが、電源側を並列にすると回路がショートすることで悩みました。
やっぱり独立電源が良い解決策ですね。
Can I charge my drone battery(3s - 11.1V) using this circuit?
yes
No plz don't
@@easytechzones Made it yesterday. Working perfectly. ruclips.net/user/shortsrLuGCFoa-CA?feature=share
You can add 5V isolated dc-dc converter but may have to drop the charge current below 1A
Brother aap pvc box kaha se late ho
Chadni se liya tha
Super project
Thanks
Louozye o
dfggg
Why the positive comment? He is being deceptive. There is NO 2S or 3S charger.
There is no in-circuit charging, either.
This is something I would expect from a 8 year old.
awfool video, awfool explain...
Big Fan Bhai Awesome 👌
Thanks
Why the positive comment? He is being deceptive. There is NO 2S or 3S charger.
There is no in-circuit charging, either.
This is something I would expect from a 8 year old.
Very nice but explan is very bad so that digram please send me
Ok K
Why the positive comment? He is being deceptive. There is NO 2S or 3S charger.
There is no in-circuit charging, either.
This is something I would expect from a 8 year old.
Can we charge 3s polymer battery
Depends on voltage
11.1v
Basically all I want is a balance charger that can charge 24 batteries. Can I just use a 12s BMS with balance? The batteries would be arranged in 4 pack sections.
Sir veroboard ko kaise karen chota se lekr bara size tk video bnayen sir please😟
And how will it be used in any circuit?
3s ko charge k liya 3charger legane honge
Thanks dada bananor jonno etar dam koto hobe
150-200
@@easytechzones ki korya 1 taa tp4056 yar dami too 150
Gazab 👌sir I like,it u are Great 😎
Thanks
Why the positive comment? He is being deceptive. There is NO 2S or 3S charger.
There is no in-circuit charging, either.
This is something I would expect from a 8 year old.
What is the output voltage
4.2 per cell
Thanks
what if i want to charge 12v 3s 10ah battery with this how many time it take to charge?
Bro can we use 1 charger 1by1 pls answer
How to charge
Simply connect battery on particular port
Puedo cargar lipo para el dron
Thanks
@@easytechzones i have purchased a 3.7 v 320 mah lithium polymer lipo rechargeable battery; showing 0 v with multimeter, > but it does not charging with tp 4056> what is the solution ?
Bhai mujhe 4s ka banana hai ek video aur bana do please ye video se behtar means comment section se jo bhi fix mila hai us se fix kar ke
Please tel me how meny hours go to charge sir please
Can we use 3amp single charger to charge all 3 module at same time. Can we connect 3 charging module input source in parallel.
Absolutely NO. Never even try to do that unless you want some good fireworks.
@@SAHILKHAN-lu8oq can we charge it 1by1 with 1 charger or we need 3 chargers please answer it will help me alot
@@atyacharigamer9784 you can do 1 by 1 by 1 charger.
But if you want to charge 3cells simultaneously, you have to use 3 charger. Not 1.
@@SAHILKHAN-lu8oq 1 more question can we charge it with dc to dc step up module by setting 7.4 volt for 2s 7.4v battery it will be not overcharged right or it will is it safe or not pls answer 🙏
@@atyacharigamer9784 No you cannot use that setup. The whole point of using 3 different chargers is to achieve isolation of ground.
Nice but 3 charger needed
Why the positive comment? He is being deceptive. There is NO 2S or 3S charger.
There is no in-circuit charging, either.
This is something I would expect from a 8 year old.
Second comment, 2 like and first view. Well done 👍.
Thankyou
Nice information
Thanks
Why the positive comment? He is being deceptive. There is NO 2S or 3S charger.
There is no in-circuit charging, either.
This is something I would expect from a 8 year old.
Just foolish idea....My circuit did short circuit...
You must use an independent power suply for each module like he did in the video.
If you connect them all together to use 1 powersuply then it will short out
Amr touch switch sensor. Board er answer ta kothy gelo Dada plz ble dao 🙏
Is it safe
Yes
Good job with all the best information
Why the positive comment? He is being deceptive. There is NO 2S or 3S charger.
There is no in-circuit charging, either.
This is something I would expect from a 8 year old.
First view and nice invention 🔥🔥🔥
Thanks 🔥
Saran: lem jangan mengenai IC atau konektor karena dapat menyebabkan fungsi modul tidak maksimal atau tidak akurat dalam mengkalibrasi baterai
catatan: sesuai jenis lem yang akan digunakan
Suggestion: don't get glue on the IC or connector because it can cause the module to function not optimally or inaccurately calibrate the battery
Note: according to the type of glue to be used
What type of the glue us safe to use?
plz circuit diagram
👌Super bhai
Thanks
Why the positive comment? He is being deceptive. There is NO 2S or 3S charger.
There is no in-circuit charging, either.
This is something I would expect from a 8 year old.
What's worse than 1 charger? 3 chargers!
Also at night, those LEDs are gonna be a huge eyesore, add a switch for turning it off.
no
yes
make one without module
if I want to charge all batteries at a time in a 3S pack, then i can't use this circuit, pls make a video to charge all 3 batteries at a time
""Let's play for those children who doesn't have their parents they are real legends ""😀
Led to kahi orr dikha reha h full battery hone pe 3 s ki
Very nice video bro
Why the positive comment? He is being deceptive. There is NO 2S or 3S charger.
There is no in-circuit charging, either.
This is something I would expect from a 8 year old.
И нужно было до такого додуматься.
D!
Thanks 😊👍
Welcome 😊
Why the positive comment? He is being deceptive. There is NO 2S or 3S charger.
There is no in-circuit charging, either.
This is something I would expect from a 8 year old.
Without bms module chara v
Battery charge Hobe kono khoti hobe na
Lasting com
This like b3 charger 800 mA
Ficou Muito Bom Seu Projeto
Why the positive comment? He is being deceptive. There is NO 2S or 3S charger.
There is no in-circuit charging, either.
This is something I would expect from a 8 year old.
Un trabajo pésimo.
En qué aspecto? Yo lo veo excelente! Eléctricamente correcto...
Iam make this charger but not charge midle battery
No heatsink 😢
Nice video
Thanks
Why the positive comment? He is being deceptive. There is NO 2S or 3S charger.
There is no in-circuit charging, either.
This is something I would expect from a 8 year old.
Please give me a diagram
Nice video ❤️👍
Why the positive comment? He is being deceptive. There is NO 2S or 3S charger.
There is no in-circuit charging, either.
This is something I would expect from a 8 year old.
Hello friend. Your presented device it's just a charger, no balance is made between cells.
All battery will charge separately . So after final charge complete you will get all battery voltage approximately same
Box inside is so hot...
More like watch me make a charger
Super👍
Thank you 👍
Why the positive comment? He is being deceptive. There is NO 2S or 3S charger.
There is no in-circuit charging, either.
This is something I would expect from a 8 year old.
এটিতে ব্যাটারির কোন ক্ষতি হবে না
Naaa ami use kori
good work i save it . great
Why the positive comment? He is being deceptive. There is NO 2S or 3S charger.
There is no in-circuit charging, either.
This is something I would expect from a 8 year old.
Your IQ level super good
No absolutely not
Why the positive comment? He is being deceptive. There is NO 2S or 3S charger.
There is no in-circuit charging, either.
This is something I would expect from a 8 year old.
🔥🔥🔥🔥🔥
hmm
Awesome
Thanks
Why the positive comment? He is being deceptive. There is NO 2S or 3S charger.
There is no in-circuit charging, either.
This is something I would expect from a 8 year old.
Good
Why the positive comment? He is being deceptive. There is NO 2S or 3S charger.
There is no in-circuit charging, either.
This is something I would expect from a 8 year old.
👌👌👌👌👌
Thanks
Woow
Thanks
Why the positive comment? He is being deceptive. There is NO 2S or 3S charger.
There is no in-circuit charging, either.
This is something I would expect from a 8 year old.
Excellent.
Why the positive comment? He is being deceptive. There is NO 2S or 3S charger.
There is no in-circuit charging, either.
This is something I would expect from a 8 year old.
3s battery
Yes
What
Cool~~
Why the positive comment? He is being deceptive. There is NO 2S or 3S charger.
There is no in-circuit charging, either.
This is something I would expect from a 8 year old.
First
Thanks
fake
Shame on you
Why say shame on him? Everything is correct!
@@marounabimoussa4374 because it is clearly BS
👌👌👌👌👌
Thanks