How To Make Homemade PVC Wind Turbine Blades DIY
HTML-код
- Опубликовано: 17 сен 2024
- How To Make Homemade PVC Wind Turbine Blades DIY. First you need a pvc pipe should have a diameter of 10 cm. One pipe can make four blades. "how big do you need them" my blades is 5mm thick and 50cm long. The material are very light weight and cost effective!
Visit my store on ebay: www.ebay.com/u...
Buying one helps "SUPPORT" my research tremendously, helping me get all materials & equipments - Magnets, Wires, Lab-TOOLS & any other building supplies, variable Power Supply ect. that I need for the future...
If you like my Demonstration-Experiment click the "like" Button.
SUBSCRIBE www.youtube.co...
Also follow me...
facebook: / eleman-839836566223212
instagram: / eleman_gc
SHARE with your Friends...
Feel free to post your Positive or Negative comment, without blasting the others...
Enjoy and stay tuned..!
#Howtomake #Electric #Mechanic
Very precise. Well done :) Thanks.
Thank you this is extremely helpful!!! Was thinking about make them with fiberglass, but i will begin with this quite better for starting
Great job
Going to give this a Go ! Thinking of affixing 3 maybe 5 to a 26 inch bicycle wheel. Use a three phase motor in generator mode, eaaa! Would make a fine back up source for a solar power wall charger.
This isn't bad at all!
Are you eager to further this one with something even better for practical use?
Say, if you have an 6 hp lawn motor stored somewhere in a shed, you could possibly use this to make yourself a wig craft for use on water, it makes it way more easier for you to travel huge distances rather than using a motorboat.
I am planning to do just that, and this tutorial made it a little bit more reachable :)
this is one of the best DIY blades can you pls give me the exact measurements of the said project thanks
Very nice. I just have to ask one question. Why didn’t you drill the mounting holes while the blades were all screwed together?
Smart, I like this one :) Everything easily found for free that I can build of is always appreciated :)
+Torgny Nordén Thanks bro! peace...
pvc simple Light weight weatherproof. good idea,🌫
NACA is an organization that keeps track of foil shapes 0015 is usable here I believe.
You can use a car alternator and pulleys / belts with a rechargeable battery wired in for the alternators field to make 12 volts
i, like your channel it is so, good idea and spray the colours
At 2:30 when he joined the blades to the hub, it would have been a better mount if he put a strip of metal above the plastic so that the blades would have been sandwiched between metal plates.
Thanks for sharing brother!
C’est très bien bravo.
Nice, well done :), thanks for sharing it.
Hi; ABS plastic pipe warps in sunlight, PVC is subject to UV rays. Both get brittle, in sunlight. It's best to give either, a double coat of protective paint. Also, DWV...(drain, waste, & vent) pipe has a foam inner core. Schedule 40 pipe, does not and would be stronger...longer.
Πολυ κάλο μπράβο!!!
Very good video! Could be even better if it has more and more content about it!
Hi George , This is a dreamy thing I would always make , but my question is : " how to make blades ?" I mean knowing where to cut ? I should have a pattern on paper and cut the pvc pipe according to. Where can I find that patter ?
Simply great!!!
Blade untested... Shouldve brought a fan to see if blade can catch light winds.
What kind of bracket did you use to connect all three blades, what is it called.
Hub. Spindle.
Лайк за труд, Good, но полнопрофильные лопасти лучше работают на
Looks Great, but what did you use for a hub
Cool
Good. Like it.
Great video and thank you!!!
Good idea
Morten Skogly Thanks bro! peace...
whats the music fellas? Sick blades by the way, i'll use the idea
thanks👍
what are you using as the 3-way hub in the center which you mounted all of the blades onto?
Good film but a big dumb D'uh! moment there George.
You built it as a propeller instead of a turbine. You made the blades inside out. The leading edges are on the trailing edge side.
Making it run normally the trailing edge is held. It will force the blades flatter in strong winds instead of increasing the pitch. Big ouch!
How do you work out the size & shape, is there some sort of online calculator which will help us design it for correct torque and speed?
Atbhigh speed is it balanced?
Where did you get the middle piece?
Awesome video- cool music too.
Neat👍🏻
What is the proper name for the black brack holding the 3 blades together?
+dennis varghese meant to say bracket
how do you convert that energy ? is it AC or DC .. .what if the motor spins in the opposite direction ? ... can you share a complete build ? from A to Z ? nice channel
Would have prefered to see them wind driven instead of muscle driven though x)
ingénieux :)
This method is very popular with pvc but it is working right ?
What does your motors' name plate say? What generator did you use to make the voltage?
aweosme how many horse power can a pvc made to sustain
use a jig saw to cut them out, its faster and safer.
awesome
Thanks For Watching!
where do you get the hub?
Yes, the most important comment goes ignored.
the structure that held the blades was it done by hand or laser cut
Thanks for your comment. My hand is laser cutting....
The point is will the wind able to turn that blade it looks so heavy and stucked
Kedey S That relies on the motor
hey can you share any thing about the generator you used
How much noise do they make?
How to build the motor that move the blade . Can you show me how ?
can u provide details of material??? specially generator
Power that pretty rotor, too.
Beserta polanx dong bang
Turbine measurements please sir
Amazing are u hiring!
I could ask for 1 year internship with an investment for the following years.
How much voltage it generated at the final?
Am încercat si eu asa dar nu iese bine
Ultima iese mai mica cu mult decit prima.....
View this video AC INDUCTION MOTOR CONVERSION TO AC PERMANENT MAGNET GENERATOR this motor has the wind turbines it is converted by me!
Είσαι ελληνας
PVC WIND TURBINE ESAS PERECEN MINIATURAS DEBEN SER SOBRE 33 PULGADAS CADA UNA MINIMO 70 DIAMETRO PARA QUE GENERE YO TENGO 3 MOLINOS DE 2000 WATT 12V CON ESA ASPA
Hola como estas!, tendrás alguna info de los molinos para ver como se podría fabricar? muchas gracias saludos!
HAY UN FALLO AL ESTAR SUPERPUESTAS LA PALA DE ARRIBA SERA ALGO MAS GRANDE
LA MUSICA MOLESTA MUCHO VOLUMEN
Too many ads at the end of the video. Could not see finished blades. Fail
Why too shortly??
can iget dimensions of blade
Would melt where I'm from
polu wraio apotelesma!
Νασε καλα,σε ευχαριστω για το σχολιο σου!
FAN
shit I mounted the backwards now I got tornado in my back yard
generator name
dude, wheres your gloves?! j/k
Or your safety Google
You big girls blouse! Gloves suck!
you big girl, wear some dern gloves
καλό το βιντεάκι, αλλά βρε Έλληνα χάθηκε να το γράψεις κα στα ελληνικά ; ως και σουαχίλι το έγραψες εκτός απο την ελληνική ,την πηγή των γραφών
How about showing it working? Output in decent wind? Ammeter? I did my first wind generator with a pc fan and hooked it to a volt meter, stuck it out the window when I hit 80 kmh. My version of this demonstration was way better. Hook your system to the back of a truck while going down the expressway at 80 kmh and hook up DMM and ammeter...show us real shit!
That's not the point of this video. This video is all about showing the viewer how to make the blades, not what to do with them. This way, we can do our own testing. And if your demonstration was so good, why are you bothering to watch and comment on this video?
My version wasn't worth producing enough current, mind you, it was a PC fan. It would light up an LED, but why go through trouble of making this and not know power output? Good job on the blades, my point was not to criticize, but asking for what really matters, electrical production or the promise of such in future instead of a closed-ended project only doing part of the work. I have a wind generator project and will post vids, but I am months away from posting anything. My project uses an electric motorcycle PM AC motor and I was interested in your vid for blade ideas, but there is no info on power output, so I need more info so I don't build blades that are too small for my 3000 watt motor/generator. I may take a similar design using pipes or sono tube and make vertical set up. I will make some very large blades for my system, probably bigger than necessary because I am looking to maximize performance and can use different gearing to match blades to motor and wind available. It would help also if your description mentions whether or not this is a one-off or video series. If you want to be offended on my comment, it's your call.
Think of this if you want any decent power you need a decent gauge enamel coated magnetic wire encased in fiberglass resin it is about 35 turns in parallel (two wires running together for each coil) for 12v or 1 wire a 70 turns for 24v 3 phase ac to figure out how to do this and use this just google it there are plenty of resources how to build PMA's with different designs I personally like axial flux. Anyhow look at the ratings on a fan you will not get enough anything to do much with a computer fan lol your lack of research is what costed you the time but what you don't realize is the education from what you did would have costed you a lot more if you payed for it so keep tinkering you'll get it but if you want larger scale power you must build according to that there is no secret energy device using a computer fan of 500ma that is going to power much more than an LED you should not expect this and if you do you did not read much. Maybe you should try hugh piggots book about wind turbines it will point you in the right direction.
A comment on the video turns out to be better than the video. My PC fan was my first attempt at such a feat, but was more of a reflection of why this video was incomplete. It is easy to tell people to google something, but google is flooded with B.S. and it is hard to find credible sources that point people in the right direction. You actually seem to point in the right direction and thank you for that.
Not worth watching. How about some details, and nobody wants the music.
Never use PVC it corrodes in the sun even if painted and it blows up.
Buying one helps my research tremendously, helping me get all the supplies I need for the future. Visit my store on ebay: www.ebay.com/usr/eleman-gc
here for some info not a f...ing music show
I GUESS YOU'VE NEVER SEEN ANYONE CUT BY A DISC WITHOUT A SAFETY GUARD.
DON'T TRY THIS AS SHOWN.