I’ve been solving square 1 for 9 days now and I average high 30’s to low 40’s and my best time is a 22 second solve. My goal is to be sub 15 which is what I average on 3x3 because I think it would be cool to be sub 15 on 2 puzzles. The step that’s holding me back the most right now is EP because my recognition is really bad. I also sometimes get really bad CS cases and it takes me up to 10 seconds, but I usually average 5-7 seconds on that step. I started off learning intermediate CS because when I started researching square 1 I watched that video and thought it didn’t look that hard, which it wasn’t. My CO and EO aren’t that bad but I only know 2 EO algs, one of which being M2. For CP I know all of the algs for it but my recognition is pretty slow. And for EP it takes me like 15-20 seconds so I’m going to learn some algs for that so I have more options than Adj/Adj.
The only problem with square-1 is that it breaks. I live in Brazil so the shipping took 2 whole months. I was averaging 30-33 seconds when my Cosmic MGC broke and know I am averaging about 52-53 seconds because I have forgotten a lot of my EP and how to do scallop-kite cube shape.
What I find fascinating about people speedsolving square-1s is that the square-1 goes from a very jumbled state into a clean state in such a short time, it's almost as if they are reading a 100-page book at the speed of light😂
Hmm, because of how the pieces are on a square-1 and the inherently bad reverse corner cutting, I can never make the layers stop in the right spot when going fast so I'm constantly making wrong turns, how do you do that?
I'm biased of course but I would recommend not switching since LV has the most resources and has more potential (kinda like CFOP compared to Roux). However, if you really want to, switching as early as possible is probably better to get a head start, and Lin does have a lot of potential to be fast as well.
Would recommend looking back on my beginner tutorial, solving the corners first and then the edges last (or CP and EP) ruclips.net/video/IkmlMEHYyzI/видео.html Good thing is you don't have parity!
hi, i have 2 questions: 1: can i lube a sq1 like i would lube a 3x3(without dissasembling)? LIke opening a gap between corner and edge and putting a drop of lube in there? 2: can i lube a square 1 with a water based lube(Like Dnm 37) or would that make the cubes springs rust or anything like that? Thanks
So I know this is an old video but I've got to say this I'm trying to learn sq-1 (to become faster I already know how to solve it) and its extremly hard to follow for the following reasons 1. You do the algs fast without showing notation so I'm slowing the video down to 0.75x and still cant follow along with the moves your doing 2. You're turn th cube up and down a lot so it's hard to follow making sure I have the same cases you do and you also do a lot of cuts that arent mentioned or anything
![How to Turn the Rubik’s Cube [Beginner to Advanced Finger Tricks]](/img/1.gif)
i was just looking for a video like this! you’re carrying the sq 1 community right now lol
Doing my best :D
mx sq1
@@leejunyi5232 jun sq 1
@@mtimes02 cmll
fax
Fun fact: this guy taught me literally everything I know about sq1
I really appreciate your content! :)
me 2
nobody else made sense to me other than him
I learned with all your tutorials 6 months and now I avg 13 and got a 5.64 single thanks
dang that's really good
Hi blobfish
Sub 6 cuber did acting like sub 30😂😂😂lol
yw
Timestamps:
00:00 - Intro and Overview
00:45 - Notation
1:56 - Turning/Fingertricks
2:44- Cubeshape Tips
3:44 - Corner Orientation Tips
4:00 - Edge Orientation Tips
4:31 - Corner Permutation Tips
4:56 - Edge Permutation Tips/Parity
6:52 - Simple Example Solve
9:22 - Advanced Example Solve
12:52 - Outro and Closing TIps
I’ve been solving square 1 for 9 days now and I average high 30’s to low 40’s and my best time is a 22 second solve. My goal is to be sub 15 which is what I average on 3x3 because I think it would be cool to be sub 15 on 2 puzzles. The step that’s holding me back the most right now is EP because my recognition is really bad. I also sometimes get really bad CS cases and it takes me up to 10 seconds, but I usually average 5-7 seconds on that step. I started off learning intermediate CS because when I started researching square 1 I watched that video and thought it didn’t look that hard, which it wasn’t. My CO and EO aren’t that bad but I only know 2 EO algs, one of which being M2. For CP I know all of the algs for it but my recognition is pretty slow. And for EP it takes me like 15-20 seconds so I’m going to learn some algs for that so I have more options than Adj/Adj.
Much awaited Thank you so much. 🥳
No problem!
I do think, as a person in that position, learning cs can easily cut 5-10 seconds off any time, and you kind of need it to get good
2:06 i think you meant second
lol
thank you so much this is the video i was waiting for!
No problem!
Step 1: tempted to buy a square 1
Step 2: question
Step 3: buys another 3x3
Step 4: watches people solve square 1
Step 5: repeat
I really need to know how you scramble so fast 😭
Im pretty excited abt getting into squan. Nice tips 👍
Are you gonna make a part 2 to get even faster?
2:06 he meant second
I'm gonna follow this video and try and get better at square 1 in hopes so that when I go to my first comp I'll make the cutoff lmao
it's been 5 days and i literally have went from averaging 1:30 to averaging sub 1 minute
@@RedZFlame what about now?...
@@xycrypt well going to the comp ended up not working out and i stopped practicing sq-1 so i'm not really sure
The only problem with square-1 is that it breaks. I live in Brazil so the shipping took 2 whole months. I was averaging 30-33 seconds when my Cosmic MGC broke and know I am averaging about 52-53 seconds because I have forgotten a lot of my EP and how to do scallop-kite cube shape.
underrated
Man, I missed your videos!!
Glad to be posting more often! More coming soon :)
What I find fascinating about people speedsolving square-1s is that the square-1 goes from a very jumbled state into a clean state in such a short time, it's almost as if they are reading a 100-page book at the speed of light😂
Hmm, because of how the pieces are on a square-1 and the inherently bad reverse corner cutting, I can never make the layers stop in the right spot when going fast so I'm constantly making wrong turns, how do you do that?
in the first example solve i started on the top instead of flipping it and got a 1 slice OBL
Pls put in the links in the descrption btw i love the video
Im hangin’ around 22 and 23 secs, what do i need to do
Learn full cs if you haven't already
Learn full ep if you haven't already
Both great pieces of advice! I do have a sub 20 video if you haven't checked that out yet :)
Tip: You can also try to get 4 together on each side (scallop scallop)
Thoughts on tingmans sq1 tutorial
How much would you recommend learning/changing to Lin from LV at this level?
I'm biased of course but I would recommend not switching since LV has the most resources and has more potential (kinda like CFOP compared to Roux). However, if you really want to, switching as early as possible is probably better to get a head start, and Lin does have a lot of potential to be fast as well.
@@CubeMasterYT Thx for the tip!
Idk if this is fine, but for cp, I always turn it into adj adj/Jo cause i never learned the whole thing
How does your cube actually move like that mine keeps locking up
Who tf dislike this video ??
I know right
Now we’ll never know
I finally found the j perm of square 1 !!
2:06 Don't you mean the SECOND alg??
You were on hbox stream
Cube master for square 1
Please review the new Meilong SQ-1.
Man it is bad . Try little magic magnetic version or new mgc sq1
You are not a cube master you are square 1 master
#vatsalcuber
If I learned from ting man. Is that tutorial ok?
what cube was used in this vid
U posted this on my bday lol
Which cube is that?
Cube master i am almost solving my first square 1.I got a T perm and a Y perm at last step do you know an algorithm that solves T perm on square 1?
Would recommend looking back on my beginner tutorial, solving the corners first and then the edges last (or CP and EP) ruclips.net/video/IkmlMEHYyzI/видео.html Good thing is you don't have parity!
i suddenly became sub 40 after i watched this video
"Let me learn squared-one"
*finds video*
"I'm f*@k"
my square 1 keeps locking up even though it is very tight...
Save to watch later XD
Hi! Do you have any tips for a person who is sub 12 and knows CSP for stars? Thanks!
finish csp
hi, i have 2 questions:
1: can i lube a sq1 like i would lube a 3x3(without dissasembling)? LIke opening a gap between corner and edge and putting a drop of lube in there?
2: can i lube a square 1 with a water based lube(Like Dnm 37) or would that make the cubes springs rust or anything like that?
Thanks
For the first question you kinda can and for the second one as long as you’re not lubing the core
for the second question, have fun controlling that
Whose video was that in the beginning
its him solving slower like j perm in his sub 30 3x3 videos to showcase, that you dont need 1300000 tps/sps
@@joshua6.6.9 that looks like Aiden bartlett to me
Esto me sirve porque estoy re estancado mal, no tengo un tiempo fijo por así decirlo quiero al menos ser sub 50
So I know this is an old video but I've got to say this
I'm trying to learn sq-1 (to become faster I already know how to solve it) and its extremly hard to follow for the following reasons
1. You do the algs fast without showing notation so I'm slowing the video down to 0.75x and still cant follow along with the moves your doing
2. You're turn th cube up and down a lot so it's hard to follow making sure I have the same cases you do and you also do a lot of cuts that arent mentioned or anything
Is full cp parity worth it then?
Man I think csp is better than that .
Till sub 15 don't worry about parity or other methods follow what he said
How fast can we go with beginner method
Can carry till till sub 15 but with some advancement
“Time stamps adding soon”, cmon u gotta come back and add them!!!
he is like j perm but square 1
How you all scramble that fast 🙄
I always mess up when speeds scrambling sq 1😄
I am avg under 25 sec with 2 eps only
Adj adj and opp opp
Lol
All you need :D
@@CubeMasterYT is this good or should I learn some more eps ?
Seriously learn more if you want to be faster.
@@JPDcuber u replied too early that I left cubing 🙂🥲
Iol😊
I can’t even solve Sq1
It's not as hard as you think! ruclips.net/video/IkmlMEHYyzI/видео.html
First
Cube master will not pin this
correct
CO makes almost no sense
CP tutorial sounds sus