That's a dope ass truck, I have an 02 Sierra with the small 4.8 V8. Barely starting to do some modifications. I like the the drop on your truck, that's the height I would go with too. Good job.
Appreciate the video, you helped me out a lot have watched a lot of videos that are long and not very effective. Your video is understandable and to the point👍🏾
Thanks bro, that what I was aiming for. I had a hard time searching for a video that would walk me through the installation process so I decided to just make my own. I'm glad it helped. 💯
Hi, how are you? Your path is very beautiful, could you tell me which color is correct, I'm doing a project and I'm going to paint my truck, I really liked the color of yours, thank you!
I plugged everything the same way and my lights in my cluster turn on and freeze and when I try to turn on the turn signal nothing happens, what could be the problem ?
My DRLs didn’t work until I replaced the daylight sensor in the dash, pain the ass with how fragile the dashes are after 20 years now but you may want to look into it if your DRL lights still aren’t working.
I have an 05 Sierra and have had the same headlights as you for about a month. I’ve been trying to get the drl bar to stay on at all times. Anyway you know how I could do that? The only time it comes on is during the day when I’m in drive or reverse and never in park. And I want them to be on at all times. If you could reply that would be great
If you wire it like how it was shown in the video, they will only work as daytime running lights setting along with blinkers (only while daytime lights are on). The drl bar won’t be on if your low beams are on (if wired exactly like the video)
Nvm they magically turned with the low beams on while playing with the light switch. Just wire it like in the video and u good, my bad if I’m late just thought I help just in case
Yeah I did exactly how you did it at first it cut off both of my led taillights and after that I decided to play around with the wires and it works on the left side but on the Right side I had to take out my bulb from my side marker to be able to get my right taillight to work
The two screws on top. Screw it until the headlights levels. Preferably do it against a wall with the headlights on 8 feet apart so you can level the highbeam correctly
That happened to me. Make sure that the metal hangers are properly insterted. You might need to pinpoint that they go correctly in because if the dont the headlight will not sit perfectly and it will be facing up. Make sure that it goes through the inserts, it might be hard since the plastic is fresh so you got to jiggle and push the headlight a bit so they go in properly. Once its in adjust the headlight with the sscrewdriver to your own preference.
Totally helped me with my truck I watched like five videos on installing u are the only one showed wiring thanks
X2
Thanks for this video foo. Ordered my lights
That's a dope ass truck, I have an 02 Sierra with the small 4.8 V8. Barely starting to do some modifications. I like the the drop on your truck, that's the height I would go with too. Good job.
Appreciate the video, you helped me out a lot have watched a lot of videos that are long and not very effective. Your video is understandable and to the point👍🏾
Thanks bro, that what I was aiming for. I had a hard time searching for a video that would walk me through the installation process so I decided to just make my own. I'm glad it helped. 💯
Thanks for the video because i was stuck like chuck 👍🏾
Grate video bro , keep up the good work
Man your video help im bout to order some for my 03 yukon denali i had to look how to install first so you helped me so know i know how to wire them
Great video love it Thank you
Thanks bro very helpful
Muchas gracias! Un gran video .
Sigue con más videos así !🫡
Great video and nice truck man!!!
Puro 956!
Nice truck bro💯
beautiful truck brothaaaa i got an 02 siverado single cab same color as urs bro.. i lived in pharr.. my whole family from the valley..
Hi, how are you? Your path is very beautiful, could you tell me which color is correct, I'm doing a project and I'm going to paint my truck, I really liked the color of yours, thank you!
My “parking lights” won’t turn on unless I turn. How do you get yours to stay on ?
badass truck💯
I plugged everything the same way and my lights in my cluster turn on and freeze and when I try to turn on the turn signal nothing happens, what could be the problem ?
My DRLs didn’t work until I replaced the daylight sensor in the dash, pain the ass with how fragile the dashes are after 20 years now but you may want to look into it if your DRL lights still aren’t working.
Personal time tag: 8:46
How do you turn the drl bar alone if connected to turn?
that’s what i’m tryna figure out if you put it to the turn single will it stay on
This vid helped so much thanks 🤌
I have an 05 Sierra and have had the same headlights as you for about a month. I’ve been trying to get the drl bar to stay on at all times. Anyway you know how I could do that? The only time it comes on is during the day when I’m in drive or reverse and never in park. And I want them to be on at all times. If you could reply that would be great
Did you connect them the same way I did or did you connect them to the headlight bulb wires?
Means that they are your drl which drl on come on when vehicle is in gear
Thanks man appreciate this video!, what drop do you have on your truck also what wheel size?
Thanks, the drop is a 6/8 and wheels are 20s
When it warms up I'll be doing this
How do the drl turn on by itself
If you wire it like how it was shown in the video, they will only work as daytime running lights setting along with blinkers (only while daytime lights are on). The drl bar won’t be on if your low beams are on (if wired exactly like the video)
Nvm they magically turned with the low beams on while playing with the light switch. Just wire it like in the video and u good, my bad if I’m late just thought I help just in case
Do you think i can connect them to my fog lights?? So i can just turn it off or on whenever i want
Yes, they will turn on with the fog lights. Best way to do it is how I did it in case you want to hve a bit more control of it
this was very helpful. thank you.
Glad it helped
What fuse do I gotta change?
Thank you hombre!!!
As for the headlight, is the L shaped figure only supposed to light up?
Yeah it supposed to give the look but the inner headlights should work as well
You right becouse I ordered some last year they were broken
What type of LED bulb did you go with? How did they turn out?
Are the head lights still working? I want to get them but not sure if they will last. Thanks
That's a cleans as truck
Hello Nice truck.
I see you have 20. How much of a difference in mpgs since upgrading to bigger rims?
When your turn signals blew, how did you repair it exactly? What fuse??
check the back off fuse box top it says rt on fuse located and rt means right turn
Beautiful Truck!!
Thanks, I no longer have the truck but hopefully by the end of the year I get a 2023 Cheyenne single cab
What size of tires you running...
What drop do you have ?
6/8 drop
Looks clean
What drop does it have ?
Supiste explicar muy bien todo el proceso!
Gracia, espero le haiga ayudado 💯
🧡
Did yours get ugly like yellow over descolocacion and stuff??
Not yet but within time i dont doubt they will
Have they yellowed yet?
Where u get those wheels?
Aye I connected mines like that but the turn signal gets stuck and don’t work so idk what the problem is
Check your fuses or remove the battery and reconnect to reset it
What fuse is it I just install mine nd they went out both sides
Same did you find out which fuses?
Hey man I connected everything but my side mirror turn signal stayed on I’m not sure why
Unplug your bulbs and replug them, also check your fuses
Rims tire and rim size / drop?
Will this work the same exact way on a 2003 model
Yes only different headlight style
Is it sierra or silverado? If its sierra nothing changes
@@statikfroy2069 Sierra and thx
do they stay on without the turn single on?
Yes they stay on... Ill make another video soon on an update of the headlights
How many led lights do you need to buy in total ?
4 bulbs, but in one of my headlights the fitment was too small. You need to sand it to widen it a bit
🔥👍💯
I let on my sidemark bulb on and my taillight from the same side won’t stay on what can be the issue
Have you checked if the fuses are still good? Locate the fuse for your taillight and inspect it. If its good then check your lightbulb
When i plug in the drl bar and the side marker led or normal bulb is on, it turns off brake light
But on one side the drl bar is on and my side marker and everything is fine
@@okiig6727 did you install it exactly the same way I did?
Yeah I did exactly how you did it at first it cut off both of my led taillights and after that I decided to play around with the wires and it works on the left side but on the Right side I had to take out my bulb from my side marker to be able to get my right taillight to work
Anyone know the back beds name ?
Funny how he said he saw other videos where the installation wasn't done properly, i guess stripping wires and using a electrical tape is proper...
Better than what ive seen, comments on my vids say otherwise from what your are. 🤡🍼
He doesn’t know what a t type connector is.. apparently. This video is how to make it work the wrong way. 🤦🏼♂️
My low beams and high beams on my rights side stop working idk why
Check your fuses and check wiring
Mine did too
Hey bro where can i follow you you got more videos on your truck
Where did you order these my bro
Carid.com I also listed the direct links for the product
Sheeesh!!
I wouldn’t twist wires together your not getting a good connection other than that clean install!
Más videos de la mamalona??🔥🔥
hoiga yo quiero unas luces de esas para mi yukon 2003 .. para mochis
How do you adjust the headlight beam?
The two screws on top. Screw it until the headlights levels. Preferably do it against a wall with the headlights on 8 feet apart so you can level the highbeam correctly
@@statikfroy2069 good to go now, thanks man!
any leaks?
Leaks as in how
Mine wont stay on
Send me a whatsapp 9563704000 and show me how you have them connected
I think I blew a fuse
If im not mistajen!🤣😂 fool! You damn well know where u found it
Dammitboy
Whats good G!
This is not properly done. This is how to make it work the wrong way.
How can I do it the right way?
My headlight is facing more up and has a gap between the light and the grille for my Sierra!😔how do I fix that
That happened to me. Make sure that the metal hangers are properly insterted. You might need to pinpoint that they go correctly in because if the dont the headlight will not sit perfectly and it will be facing up. Make sure that it goes through the inserts, it might be hard since the plastic is fresh so you got to jiggle and push the headlight a bit so they go in properly. Once its in adjust the headlight with the sscrewdriver to your own preference.