Fast Set Tile Adhesive For Wall & Floor - Dunlop CF-03

Need a fast setting tile adhesive suitable for most tiling jobs? CF-03 is a flexible, fast setting floor & wall tile adhesive for ceramic, porcelain, mosaics and natural stone tiles. Due to the flexibility of the tile adhesive, it's ideal for use on tricky backgrounds such as tongue & groove floors, underfloor heating and even existing tiles!
Available in grey and white, it’s water resistant, can be used internally or externally in dry or wet areas and can be grouted in just 3 hours. - perfect for fast track tiling jobs.
✅ Fast setting - grout in 3 hours
✅ For both walls and floors
✅ Suitable for ceramic, porcelain, mosaics and natural stone tiles
✅ Can be used inside and outside in both wet and dry areas
✅ Ideal for use on difficult backgrounds like tongue & groove floors or underfloor heating.
✅ To discover the right Dunlop Trade tile adhesive for you, click here:
• Dunlop Tiling
➡️ To find your nearest stockist of the Dunlop CF-03 go to:
www.dunloptrad...
➡️ To find out more about the Dunlop CF-03 go to:
www.dunloptrad...
➡️ If you have any questions about the Dunlop CF-03 Tile Adhesive, or any other of the Dunlop Products, please contact us here where we will answer your questions as soon as possible:
www.dunloptrad...
📺 Subscribe To The Dunlop Trade Channel and Get More Great Tips
/ @dunloptrade
🎬Other Videos To Watch:
➡️ Knowing your tile types
• Dunlop's Top Tiling Ti...
➡️ How to spread your tile adhesive
• Dunlop's Top Tiling Ti...
➡️ How to select your tile adhesive
• Dunlop's Top Tiling Ti...
➡️ How to select the right trowel for tiling
• Dunlop's Top Tiling Ti...
➡️ Dunlop Top Tips for Grouting
• Dunlop's Top Tips for ...
➡️ How to use Silicone Sealant
• Video
➡️ Dunlop Waterproofing Products
• How to Waterproof a Sh...
➡️ Dunlop Grout Products
• This is Groutstanding....
🏠 If you're starting a new project, make sure to use the Job Build Tool to get the
✅ www.dunloptrad...
♦️ At Dunlop we are keen to ensure you have the knowledge to use our products with confidence. That’s why we regularly hold Trade Days at stockists across the country. Check out the next Dunlop Trade Day here:
✅ www.dunloptrad...
👤Connect with us:
/ dunlopadhesives
/ dunlopadhesives
#DunlopTrade #DunlopAdhesives

[@bsfbestshortfilmsonyoutube]

Hi There. I like your video. thanks. QUESTION ? I am doing a small tiling job. only x 2 square meters bathroom floor. I want to know ? Is there any multi purpose adhesive which I could use for both - sticking on waterproof decoupling membrane onto a concrete subfloor and also using the same adhesive for sticking tiles on top of it ?

[@DunlopTrade]

Thank you for your question.
For the bonding of a waterproof uncoupling system to concrete, we would first recommend that the concrete has a functioning DPM, is a minimum of 6 weeks old, and is clean and free from all contaminants such as plaster droppings, dirt and debris.
Next, apply a primer to the concrete, we recommend Dunlop Multi Purpose Primer diluted at 1:1 by volume with clean, cold water.
For bonding the uncoupling membrane, Dunlop CF03, Rapid Setting Flexible Cement based Adhesive may be used, or Dunlop CF24, Slow Setting, Flexible Cement Based Adhesive.
Mix the adhesive as per instruction, (as found on the bag) and then spread on the floor using a 4mm notched trowel. Apply the membrane, such as Ardex Indortec Flexbone VA to the adhesive and depress firmly. Once installed, either of the above mentioned adhesives may be used to install the tiles.
For the perfect finish, use Dunlop GX500 Flexible Wall and Floor Grout with FX90 Sealant to all corners and abutments.