I noticed the gear drive on the surge conveyor. Neat setup. What metal is the gear? Seen a lot of sintered bronze gears and they lasted a long time, but a much less harsh environment.
Naked Acres This is an older style of conveyor that we don't use any more. We have switched our conveyor drives to a gear box system. You can see one in this video: ruclips.net/video/Vma_rhcXdEE/видео.html between 1:00 and 1:15. Its simple, less moving parts, and easier for maintenance. We have several of the gear style conveyors in operation to past customers and they are still going strong, but we are constantly improving and upgrading our designs and the conveyor drive is a good example of this improvement process. Thanks for the comments, I appreciate your feed back and input.
This spirit of yours of tinkering with Technology, has raised my eyebrows. Looks like an environment friendly and cost cutting process. Keep on this good initiative.
nice light hand on that pan...I would imagine that what was recovered here was not thought of during the old gold rush days... hot dam lets get going....8)
thanks for this video Jason. I got some ounces of flour gold actually dust microscopic, below 200 and 300 mesh. how I do process and create a small bar out of it?
Jason, I nearly finalizing our investor plan about this machinery. But I really want to know if we can use these kind of turn key ore processor for copper ore? I plan to use flotation process but also considering the chemical impact since the tailings for the slime is a very big investment. If somehow those flotation process can be replaced by this mechanical process of yours, I will recommend this system to be applied in our factory with several upgrades. Please reply, thanks
Thank you for the comment. For questions about pricing or equipment please send us an email at info@mbmmllc.com or call +1-360-595-4445. You can also visit our website at www.mbmmllc.com Thanks for all your encouraging comments, great ideas, safety concerns, environmental concerns, and cost questions. We prefer to communicate through email so for any specific questions that need a response please email us! Thanks again for watching all our videos!
Sir I want any material which contains gold silver pd os ru rh pt and precious metal Material like ore slage in nuggets residue sand tailings etc If any material please send me samples WhatsApp +916396840076 India
Yes you can melt clean gold down directly into a bar or button. Here is another one of our videos showing how: ruclips.net/video/1uJin9Qmkbc/видео.html
@@johnnyllooddte3415. 0001% is one ten thousandth of 1%, or one millionth of the whole. At current price $50.58 per gram, a loss of. 0001% on 1.3 ounce would be about 0.2 cent.
ahaha these folks are in washington, so the gold is probably in washington or bc border areas..it sounds like a sample for a customer from a geologist type assaying the prospect
can someone help me. I have a lot of pyrite on my table 90% of it is presenting heavier, or closer to the gold than the magnetics, or steel from the crusher. does this mean there must be gold in the pyrite, to bring the specific gravity of pyrite from 5 to above iron specific gravity of 8? thanks.
Sir I want any material which contains gold silver pd os ru rh pt and precious metal Material like ore slage in nuggets residue sand tailings etc If any material please send me samples WhatsApp +916396840076 India
Yes! We use our system for all kinds of ore including: Silver, copper, lead/zinc, tin, etc. Also our table can be used to separate any small particles by density, such as copper and plastic, rocks and metal, glass and plastic, etc. Thanks for the comment and be sure to check out our other videos for other examples of density separation using our shaker table.
This can be installed on a trailer and moved around easily. We have several customers who do this. The table must be run on the ground off the trailer because the vibrations of the crushers can effect the table if all mounted on a trailer. Thanks
how would this work on the tailings of a 100 tonnes per hour.. would it be worth the trouble.. we get 6 per hour at 100 tones an hour.. maybe acoupla tonnes an hour of concentrates off our shakers
If you would please fill out our contact submission form at: www.mbmmllc.com/contact/ I can provide you with the specifications and pricing on our turn-key ore processors.
I have no real interest in this stuff but have enjoyed watching the progression and evolution of your equipment over time. Best of luck in the future.
Granite City Productions Thank you for the compliment.
Can you tell me, what is the smallest size of the gold particle filter?
How much is that turn key 1 ton per hour system go for as of Jan 2021?
we have ore processing plant to extract the gold do u need?
This looks good, and environment-friendly, but what is the recovery rate of this plant?
WOW! Very Impressive Operation Indeed Sir.
😎👍👍
Sincerely,
Tom Weidler in Las Vegas Nevada
I noticed the gear drive on the surge conveyor. Neat setup. What metal is the gear? Seen a lot of sintered bronze gears and they lasted a long time, but a much less harsh environment.
Naked Acres This is an older style of conveyor that we don't use any more. We have switched our conveyor drives to a gear box system. You can see one in this video: ruclips.net/video/Vma_rhcXdEE/видео.html between 1:00 and 1:15. Its simple, less moving parts, and easier for maintenance. We have several of the gear style conveyors in operation to past customers and they are still going strong, but we are constantly improving and upgrading our designs and the conveyor drive is a good example of this improvement process. Thanks for the comments, I appreciate your feed back and input.
This spirit of yours of tinkering with Technology, has raised my eyebrows. Looks like an environment friendly and cost cutting process. Keep on this good initiative.
Thanks for the encouragement!
😂😂
Very good shaking table
Can worker or officials can take some gold withe them secretly
شكرااااااا جزيلا كيف احصل على هذه الماكينة
May you send your location and quotations for all this system please up to finishing product please
Then we people says that gold is expensive 😁😅
And the value would keep getting up
nice light hand on that pan...I would imagine that what was recovered here was not thought of during the old gold rush days... hot dam lets get going....8)
Thank you for your comment and for watching our videos!
5:05 golden mountains
Thank you for your comment and for watching our videos!
We are searching for the best small gold crusher
Very interesting. We're arr you located?
very good video thanks for the info
Question is, is it really a single step table, normally use a roughing table first, and why no classification?
We have found that our tables recovers a high percentage of the free gold down to 400 mesh right ou tof the hammer mill. Thanks for the comment!
thanks for this video Jason. I got some ounces of flour gold actually dust microscopic, below 200 and 300 mesh. how I do process and create a small bar out of it?
smelt it is the best way. Check out our smelting vids by searching MBMMLLC smelting
Did u melt it down yet?
Jason,
I nearly finalizing our investor plan about this machinery. But I really want to know if we can use these kind of turn key ore processor for copper ore? I plan to use flotation process but also considering the chemical impact since the tailings for the slime is a very big investment. If somehow those flotation process can be replaced by this mechanical process of yours, I will recommend this system to be applied in our factory with several upgrades.
Please reply, thanks
Thank you for the comment. For questions about pricing or equipment please send us an email at info@mbmmllc.com or call +1-360-595-4445. You can also visit our website at www.mbmmllc.com Thanks for all your encouraging comments, great ideas, safety concerns, environmental concerns, and cost questions. We prefer to communicate through email so for any specific questions that need a response please email us! Thanks again for watching all our videos!
Very informative video mate. Thanks for sharing.
maybe slow down the vibrations... perhaps separate a little bettter
Great, thanks for the tip!
How much gold is lost in the dust.
Dust that blows away, generally has no gold in it, too light. Could actually have a fan there to blow away more.
how grade gold need to feet this processing line?
this is a good system, gold can be separated from the dirt of followers... i want to do it... cheers mate...!👍👍👍
If you can get enough gold and silver, with grinders and an arc furnace, you can start making electrum
Sir
I want any material which contains gold silver pd os ru rh pt and precious metal
Material like ore slage in nuggets residue sand tailings etc
If any material please send me samples
WhatsApp +916396840076
India
What is the primary material please, quartz?
we have ore processing plant to extract the gold do u need?
I'm new to all of this so can you please tell me where to start and where do i find and know how to look for these gold ores.
For more information about prospecting I would check out this website www.icmj.com/
how do they recognize that ore has gold in it
send it to an assayers its the only way to know for sure if you cant see the gold
Assay or crush up and pan a sample
Can you heat the gold dust to make an ingot or do you need another process before?
Yes you can melt clean gold down directly into a bar or button. Here is another one of our videos showing how: ruclips.net/video/1uJin9Qmkbc/видео.html
Thanks!
How much needed to do this
@@colmanbeatus5165 I suppose that depends entirely on how big you wanted to make it.
هل هذه الماكينة تعمل فى كل أنواع الحجر
Sir can you tell me what is this plant machine name? And can i find in pakistan i want there
To good plants
All I can say is..... beautiful! Keep up the good work!
Poo
poosmate Hi Poo! Thanks for watching!
Hey dude I got a shit ton of super high grade ore can I send it to you
How much for this set up please??.
For pricing, please send us an email at Info@mbmmllc.com or call 360-595-4445 You can also visit our website here: mbmmllc.com/
How much for this entire set up?
300 ppm not very good ore
Thank you for your comment and for watching our videos!
I will pay you $2 for those vales of gold :)
what grade per tonne would this ore be approx?
+Dave T Yes, i think it was about 8 oz/ton. Pretty good stuff!
not if you have to dig it under ground
Calache ore
At 1:00 is anything lost in all that dust coming off of it?
was thinking the same thing. can we please get an answer ?
about .0001% sure...0001% of 1.3 ounces is .004 grams of gold lost x 40 dollars a gram = 16 cents
@@johnnyllooddte3415. 0001% is one ten thousandth of 1%, or one millionth of the whole. At current price $50.58 per gram, a loss of. 0001% on 1.3 ounce would be about 0.2 cent.
Awesome .. How is the gold recovery after milling, physics or chemistry, such as cyanide and mercury?
& How soil size (of the microns) after milling ?
mercury? lol he doesnt want to kill everyone in a 1km radius he wants the gold loll look at the video
physics,, no chemicals
Silver Nitrate precipitation of Gold dissolved in aqua regia !
Where exactly was this ore taken from?
lol. Had to try.
ahaha these folks are in washington, so the gold is probably in washington or bc border areas..it sounds like a sample for a customer from a geologist type assaying the prospect
Secret location lol
What's the name of the mine?
can someone help me. I have a lot of pyrite on my table 90% of it is presenting heavier, or closer to the gold than the magnetics, or steel from the crusher. does this mean there must be gold in the pyrite, to bring the specific gravity of pyrite from 5 to above iron specific gravity of 8? thanks.
the short answer is yes...
maybe
but lead has a specific gravity of around 12..sooooo, you have that possibility too..and silver is 10
@@johnnyllooddte3415 how to get around this ? smelt it ?
Sir
I want any material which contains gold silver pd os ru rh pt and precious metal
Material like ore slage in nuggets residue sand tailings etc
If any material please send me samples
WhatsApp +916396840076
India
Hi sir helpe me
Shalom aleichem
Nice machine
Great! Thanks!
nearly 10 oz per tonne
🥰🥰
👍
Can you use this system for other minerals besides gold or no
Yes! We use our system for all kinds of ore including: Silver, copper, lead/zinc, tin, etc. Also our table can be used to separate any small particles by density, such as copper and plastic, rocks and metal, glass and plastic, etc. Thanks for the comment and be sure to check out our other videos for other examples of density separation using our shaker table.
Thinks
Thank you for your comment and for watching our videos!
Woww mashallah
How mobile is this set up?
This can be installed on a trailer and moved around easily. We have several customers who do this. The table must be run on the ground off the trailer because the vibrations of the crushers can effect the table if all mounted on a trailer. Thanks
Appreciate the quick response. Gonna give yall a call tomorrow.
how would this work on the tailings of a 100 tonnes per hour..
would it be worth the trouble.. we get 6 per hour at 100 tones an hour.. maybe acoupla tonnes an hour of concentrates off our shakers
Nice video
i am impressed
bill Root Thanks Bill! It was some pretty impressive ore! I'm glad we got it on video to show you guys.
You process 300lbs of ore to get 1oz of gold? Wow so not worth it.
Funny! While I process 3 tons to get 1oz and It's worth it😂
คุณทำได้
Where is this mine which country
And we are looking for a partner for ore smelting gold ore
USA
PRICE?
If you would please fill out our contact submission form at: www.mbmmllc.com/contact/ I can provide you with the specifications and pricing on our turn-key ore processors.
If I send you a picture of my rock can you tell me what it is.
Cool
Thank you for your comment and for watching our videos!
Gênio! super like guerreiro#!!