The front bumper and grill excepted, all are upgrades that are so useful that they cannot be omitted. Though I would add the center console storage tray as an essential.
Nice video! I have similar tail lights that are causing the error message you described, is there only one resistor or do you put one on each tail light? Cheers.
Your connector for resistor is probably not piercing one of the wires properly. From vid it looks like they use a pin to pierce the wire and contact copper wire core???
It depends which front grille you are using. The OEM grille has deep enough holes to accept the OEM screws, so the washers aren't required when fitting the LED Front Indicators. However, on some aftermarket grilles, the holes aren't as deep due to the design, so washers are required.
6 месяцев назад
Is it possible to change the halogen headlights for leds? I haven’t seen it for sale
There are aftermarket LED headlights that can be installed, but typically they aren't great and might not be legal in your country. The OEM LED headlights physically fit, but the wiring connectors are completely different and, to remain legal, you also need to install the headlight washer system and automatic self-levelling system from an SZ5 model. A quicker and easier alternative is fitting high quality LED bulbs into the original headlights.
On our SZ5 Jimny, those are the IPF Front Bumper Lamp Stay ( jimnystyle.com/products/ipf-front-bumper-lamp-stay-for-suzuki-jimny-2018 ) and IPF Super Rally LED Lights ( jimnystyle.com/products/ipf-super-rally-led-spot-driving-hybrid-lamps )
You can watch Episode 2 at the following link, and we'll hopefully have Episode 3 uploaded soon! ruclips.net/video/X2GBJj07l-k/видео.htmlsi=3n7Gmd-bB5Nlf__G
Yes, no problem at all! Although, if you're thinking about the resistors on the LED Front Indicators, we wouldn't advise driving through water that deep or you'll have more serious things to worry about!
What models can the lights be installed onto? I'm waiting on a Jimny GLX 2022 auto (Australia) and want to know if I can change out the front and side indicators with the stuff off your site?? Very new to car stuff haha thanks!!!!
Thanks for the message! Both the items you have listed (Front Indicators, Side Markers) are compatible with all specifications of 2018+ Jimny models. I hope that helps!
The seats will physically fit bar two holes that don't have a captive nut on the other side of them, so we have been investigating alternative brackets and designs. The seat belts can also be installed but there will be some complications with wiring for the pre-tensioners etc. The other hurdle is cost! The cost of the seats and seat belts alone from Suzuki is extremely prohibitive, and that's not including the additional parts required to get them to fit, nor the time involved. We're hoping we can figure out a suitable solution soon
Yes, we have a lot of customers in Australia and we send our products there directly! You can find more info on our shop - jimnystyle.com/pages/js-home
It was my first time in a Jimny. Unfortunately much too small for a 2m person. Is there an alternative for people 200cm long? Preferably so that you can also sleep in it for 1-2 nights? No, please no G-Class, Defender or RangeRover. Far too expensive for me...
why am I watching jimny videos, I dont even own one lmao
Bro I am doing the same. Even though I couldn't even afford car consumables
The front bumper and grill excepted, all are upgrades that are so useful that they cannot be omitted. Though I would add the center console storage tray as an essential.
Thanks for your comment! We'll add the Centre Console Storage Tray in the next round of modifications, along with an Armrest
Wow I’m taking notes and that phone holder is the best fit I’ve seen in the market.
Thanks!
Excelent video. very detail and informative video. Thanks
We're glad you found it useful!
Great video! And a beautiful wristwatch.
Nice video! I can't wait for my Jimny to arrive in March. I will be ordering those tail lights, they look great. And LED mirror covers. 👍🏼
Thank you very much!
great detailed video , thank you . I will definitely be ordering all these mods 👌👌
Could you please make a video of the folding table installation? Cheers
Thanks for sharing! Very informative!
Thanks, we're glad you enjoyed it!
I love this model ❤❤❤
I'm goin to own this ...
Great content, keep it up!
Thanks!
This video is perfect. Thank you very much for your work!
Thanks, I'm glad you enjoyed it!
Booked my 5 door Jimny. Cant wait to mod the shit out of it
Nice, I just brought my Jimny and wanted to know what I could do to ease my travels. I got to say, japanese design is so sofisticated and pokayoke
My cup holders didn't come with an Allen key.
Would have been nice to have some plugs for the holes not used.
I'm very sorry about that, I'm not sure why they arrived without allen keys but hopefully you were able to complete the install!
I'm pissed we didn't get this in America
Do you need to change to bulb as well as different lights for the orange indicators to get them white? Rather than a yellow tone
Do you mean the front indicators (in the front grille) or the side markers (near the doors)?
Very good ! Thanks
Awesome man!
Modern grill with "80s looking" indicators replaced with a retro grill and LED (modern) indicators 🤷♂️
Don't the cupholders get in the way of the AC vents?
do all of these parts work on the XL? is the exterior the same shape
Hello, when will the rear lights be available again for shipping to Greece? Greetings.
We are due to have more stock of the LHD-spec LED Tail Lights back in our EU warehouse within the next few weeks! Thanks for your patience
Nice video!
I have similar tail lights that are causing the error message you described, is there only one resistor or do you put one on each tail light?
Cheers.
We can't say for sure regarding other brands of Tail Lights, but for our LED units it is just 1x resistor that is required on the reverse light
Your connector for resistor is probably not piercing one of the wires properly. From vid it looks like they use a pin to pierce the wire and contact copper wire core???
Excelent video
Why the washers with the indicators? Mine came without them and I installed without issues.
It depends which front grille you are using. The OEM grille has deep enough holes to accept the OEM screws, so the washers aren't required when fitting the LED Front Indicators. However, on some aftermarket grilles, the holes aren't as deep due to the design, so washers are required.
Is it possible to change the halogen headlights for leds? I haven’t seen it for sale
There are aftermarket LED headlights that can be installed, but typically they aren't great and might not be legal in your country.
The OEM LED headlights physically fit, but the wiring connectors are completely different and, to remain legal, you also need to install the headlight washer system and automatic self-levelling system from an SZ5 model.
A quicker and easier alternative is fitting high quality LED bulbs into the original headlights.
I wanted to know about the extra lights on the front and the bracket for them .....
On our SZ5 Jimny, those are the IPF Front Bumper Lamp Stay ( jimnystyle.com/products/ipf-front-bumper-lamp-stay-for-suzuki-jimny-2018 ) and IPF Super Rally LED Lights ( jimnystyle.com/products/ipf-super-rally-led-spot-driving-hybrid-lamps )
@@JIMNYSTYLE link doen't work
@@pim1234 sorry about that, please try again now!
@@JIMNYSTYLE ok now, tnx
Very nice 👌🏻
You guys going to do more videos like this? 😁
You can watch Episode 2 at the following link, and we'll hopefully have Episode 3 uploaded soon! ruclips.net/video/X2GBJj07l-k/видео.htmlsi=3n7Gmd-bB5Nlf__G
@@JIMNYSTYLE will there be a ep 3?
@@stevestevesteve yep, should be available soon
Are those electrical resistors waterproof? Can i still go through flooded roads safely?
Yes, no problem at all! Although, if you're thinking about the resistors on the LED Front Indicators, we wouldn't advise driving through water that deep or you'll have more serious things to worry about!
What models can the lights be installed onto? I'm waiting on a Jimny GLX 2022 auto (Australia) and want to know if I can change out the front and side indicators with the stuff off your site?? Very new to car stuff haha thanks!!!!
Thanks for the message! Both the items you have listed (Front Indicators, Side Markers) are compatible with all specifications of 2018+ Jimny models. I hope that helps!
Hi, what happened with the solution for rear seats for LCV version...?....is it possible to install seats and harness without huge changes ?
The seats will physically fit bar two holes that don't have a captive nut on the other side of them, so we have been investigating alternative brackets and designs. The seat belts can also be installed but there will be some complications with wiring for the pre-tensioners etc. The other hurdle is cost! The cost of the seats and seat belts alone from Suzuki is extremely prohibitive, and that's not including the additional parts required to get them to fit, nor the time involved. We're hoping we can figure out a suitable solution soon
Where does one purchase these upgrades any suggestions
All products are linked in the description! jimnystyle.com/pages/js-home 🙂
@JIMNYSTYLE hi, thanks very much. im in South Africa 🇿🇦 is there any agents here
Needs cabin noise reduction, doors and floor
It’s time consuming, but makes a big difference
Cool
what about headlight protecting grills and same for rear lights. Not only practical they look the business
We've seen them and they definitely look cool! It's not something we stock at the moment though
Sir what wheel model do you have on this jimny? Appreciate thr info
HIGH PEAK J-01 16" wheels! jimnystyle.com/products/high-peak-j-01-wheels-for-suzuki-jimny
Can you import your products that people ordered to Australia?
Yes, we have a lot of customers in Australia and we send our products there directly! You can find more info on our shop - jimnystyle.com/pages/js-home
@@JIMNYSTYLE Thank you
thanks, which roof rack do you installed?
We're using the Front Runner Slimline II! jimnystyle.com/products/front-runner-slimline-ii-roof-rack-for-suzuki-jimny-2018
Hi.
Which size are the tires of the other Jimny???
on the Jimny with the white HIGH PEAK J-01 wheels? They are 215/70R16
Hi do you have a tablet holder? Something like an ipad pro size
Not just yet, but it's a good idea! It's something for us to look into
Where cn I find tis stuff
Right here :) jimnystyle.com/pages/js-home
Come on, it's 2023, why no torx screws?
Please come to india
👍
So basically the jimny is bare bones and Suzuki knew people would mod them.... I think I understand their philosophy 🤦🏿♂️
thats a lot of cupholder positions
It was my first time in a Jimny. Unfortunately much too small for a 2m person.
Is there an alternative for people 200cm long? Preferably so that you can also sleep in it for 1-2 nights?
No, please no G-Class, Defender or RangeRover. Far too expensive for me...
???????
????????
Very useful video! Thank you!
👍