Hello mate, What do you do to delete the exhaust valve with de Dellorto 28 carburator ? I have a problem with mine and want to delete this things but i don't know how to do this
Hi, my setup on my husqy is dep exhaust and vforce 3 and sm cylinder and 28mm dellorto and i just bought an mikuni vm 38, do you think the original airfilter box will fit on the carburetor? And what jet do you think i need?
U will probably need a husqvarna WR125 Airfilter box. At least keihin 38mm needed, the original did not fit on it. And I'm not sure about the jets because mikuni uses different numbers, but the keihin had like 150-160 or something like that if I remember right.
On this bike I locked the exhaust valve on upper position, because 2008 electrics are pretty bad. Best way to get working exhaust valve is to get a 2009-2013 SM or a WR clutch cover with a mechanic exhaust valve!
I bought husqvarna wr intake and airfilter box and the keihin went straight to them. I dont remember anymore what were the jets that I used :D Maybe somewhere near 155 or 165.
www.mp-racing.fi/husqvarna-varaosat/36222-valomaskin-muovi-sm-valkoinen-125-2009-10.html That is the link for the plastic but the light was from the original mask.
Put the needle first in the middle setting and air screw all in and then about 3-4 turns open. After that start adjusting it how it feels right for you.
@@Persneton I will have a go. it's been in shop but he premixed 50ml oil to 5litres of fuel and it's detonating cat head and throwing loads of oil out exhaust .thanks
Hey, I have a Husky sm 125 too and would like to get a bigger carburetor. My question now, does the Keihin 38 or 36 mm have a Connection for the oil tank or do you have to mix the fuel by yourself then.
Hi! I think that Keihin 36-38mm PWK carburetors don't have place for the fuel line. I had to mix fuel and oil together by myself and it is more reliable when you mix them by yourself (2,5-3%). These bikes can have problems with the oil pump so I took the whole oil pump off and mixed the fuel myself so i can trust that the bike doesn't have problems with oil and gas mixture. And I recommend to use 36mm carb so it will be easier to adjust if you'r husky doesn't have so much engine performance parts.
where did u get the shorty from? I have the same exhaust myself except the silencer. WWas it easy to get it to fit on the pipe? Hope i'm not too unclear :D
Husqvarna electric powervalve doesn’t always work so well so its better to lock it up. Mechanical powervalve from the newer sm and wr models would be the best.
Änkkä oli hussessa jo ostaessa kiinni ja siinä oli ihan husqvarnan leima kyljessä, mut ulkosesti tais olla täysin samannäkönen kotarin hgs änkkään verrattuna.
I love it so much! ❤ You created something AMAZING! Respect!!!
Thanks!
need some riding videos of this beast!!
Trym Ødegårdstuen it is sold :/ but in the end of the video you can see littlebit of riding it
this is my dream
Hello mate,
What do you do to delete the exhaust valve with de Dellorto 28 carburator ? I have a problem with mine and want to delete this things but i don't know how to do this
Nätti husse! Muistatko mistä tilasit ton tarrasarjan?
Teetin itse tarrasarjan ja mulla on noita kans myytävänä, instagramin kautta @tsmperformanceig voi ottaa yhteyttä.
Hi, my setup on my husqy is dep exhaust and vforce 3 and sm cylinder and 28mm dellorto and i just bought an mikuni vm 38, do you think the original airfilter box will fit on the carburetor? And what jet do you think i need?
U will probably need a husqvarna WR125 Airfilter box. At least keihin 38mm needed, the original did not fit on it.
And I'm not sure about the jets because mikuni uses different numbers, but the keihin had like 150-160 or something like that if I remember right.
@@Persneton okay, i need to try something like 180-280
Nice bike. How it works the exhaust valve with out the carb sensor? I have that problem v3 carb 38 and no power
On this bike I locked the exhaust valve on upper position, because 2008 electrics are pretty bad.
Best way to get working exhaust valve is to get a 2009-2013 SM or a WR clutch cover with a mechanic exhaust valve!
Tanks 😉
@@Persneton hi, I’m having this issue right now, any more info on the mechanic exhaust valve mod ?
Did you buy any new spokes?
Good job bro😃❤️👍
Thanks!
Where did you buy the plastic kit?
24mx
What jets did you use? and how did you fit the carb?
I bought husqvarna wr intake and airfilter box and the keihin went straight to them. I dont remember anymore what were the jets that I used :D Maybe somewhere near 155 or 165.
Where did you buy the headligt plastic and light?
the light was from the original plastic and I bought the new plastic from mp-racing.fi
Where did you get the vforce 3 from?
From mp-racing.fi
Nice project :) Tires size?
Thanks! and tire sizes are front 120 and back 160
Hey Where did you buy the Lightmask. I dont find it anywhere. Pls send me the link
www.mp-racing.fi/husqvarna-varaosat/36222-valomaskin-muovi-sm-valkoinen-125-2009-10.html
That is the link for the plastic but the light was from the original mask.
heya where did you but the new lateral plate at the back under the saddle
Designed it all by myself and then sent it to local laser cutting company to get cut in the right shape
@@Persneton wow okay , thank you
@@Persneton oh um i'm not talking about the graphics , im about the plastics
@@kraz4368 I thought u meant the battery holder under seat :D but I bought the Husqvarna WR sidepanel plastics from 24mx
@@Persneton I see now thank you very much !
Can anyone tell me there dellorto 28mm carb air screw and needle settings for 2012 husky havin bit trouble getting it right .thanks
Put the needle first in the middle setting and air screw all in and then about 3-4 turns open. After that start adjusting it how it feels right for you.
@@Persneton I will have a go. it's been in shop but he premixed 50ml oil to 5litres of fuel and it's detonating cat head and throwing loads of oil out exhaust .thanks
@@johnhunt5540 2% oil mixture is best, so 1dl oil in 5litres!
@@Persneton sorry what is 1dl in UK mililetres.thanks
@@johnhunt5540 100 milliliters
Hey,
I have a Husky sm 125 too and would like to get a bigger carburetor. My question now, does the Keihin 38 or 36 mm have a Connection for the oil tank or do you have to mix the fuel by yourself then.
Hi!
I think that Keihin 36-38mm PWK carburetors don't have place for the fuel line.
I had to mix fuel and oil together by myself and it is more reliable when you mix them by yourself (2,5-3%).
These bikes can have problems with the oil pump so I took the whole oil pump off and mixed the fuel myself so i can trust that the bike doesn't have problems with oil and gas mixture.
And I recommend to use 36mm carb so it will be easier to adjust if you'r husky doesn't have so much engine performance parts.
@@Persneton OK thank you. Yes I thought about a 34-36 mm carb because i think 38 mm ist slightly too big for Stock engine and HGS exhaust
@@eastpiper6658 Yeah! 38mm might be too big for that setup :D
Just pour the oil straight into to ur tank, if u know how to count the amount of oil u have to mix ist always better
where did u get the shorty from? I have the same exhaust myself except the silencer. WWas it easy to get it to fit on the pipe? Hope i'm not too unclear :D
It was already in the bike when I bought it, but I think that it's originally made for husqvarna so it doesn't need any fitting!
TSM Performance Ty for the answer! Beautiful build :D
Lucas Nordberg Thanks!
hi bro, where u get spares? my local dealer is not very keen in helping me
Engine parts from sylinterikauppa.fi, other things from 24mx and VForce3's from mp-racing.fi
@@Persneton tnk for helping a brother out bro, is the sm125 same as a wre model?
@@muhammadsalleh9396 SM is the same as WRE, but WRE has enduro tires when stock and SM is a supermoto.
@@Persneton great, thank u.ur awesome bro .sorry. all my life i only own a sports n naked bikes. first time on a supermoto -)
Muhammad Salleh No problem! Supermotos are great!
Dude I remember you said that you made the graphics yourself where did you make them do you maybe still have them saved? Tnx😉
I made the graphics myself and printed them at a local decal maker, and I still have them! Go follow @tsmperformancig in instagram, there is more!
TSM Performance i know someone who could print them for me your design is awesome 😀
@@2strokebro75 You maybe can buy the desing from me if u want, let's talk more in instadirect if you're interested!
@@2strokebro75 Yes, if you pay for them, it's not free
TSM Performance i send you a message
Why did you remove the powervalve
Husqvarna electric powervalve doesn’t always work so well so its better to lock it up. Mechanical powervalve from the newer sm and wr models would be the best.
Hello man
Could you tell me wich cilinder kit you bought?
I bought the husqvarna’s SM/WRE 125cc cylinder from a finnish cylinder store called sylinterikauppa.fi
@@Persneton Thanks, these are expensive kits. Right?
@@schuit2502 Yeah, they are pretty expensive. But I sent the old seized cylinder there and got littlebit off the prize for exchange :D
Where did you buy graphics for the plastics?
I designed the graphics by myself and local sticker maker printed them for me.
Ok thx for reply
@@benny8992 No problem!
Hieno mopotin
koska tulee ajovideoo
Myyty jo :/
Mopo kyllä löytyy!
Mistä ja miten teit ton akun ja ecu-boksin telineen?
Tietokoneella suunniteltiin tuo levy ja sitten tilattiin laserkeskukselta alumiinista leikattuna
TSM Performance Joo. Vielä semmosta et miten tuo ecu on kiinni tossa?
Muistaakseni ei ollut oikein mitenkään kiinni, mutta tukevasti tuon wr takalipan ja akun välillä
Millä maalasit jarrusatulat?
jollain astetta paremmalla spraylla
Mistä ostit uuden sylkkäsarja
Sylinterikauppa.fi
Kauan kesti toimitus ja onko äsämä sylkkä?
@@valleriihiaho5704 SM sylinteri ja noin viikko meni
Link tires?
supermotocenter.fi/tuotteet/michelin-pilot-power-2ct-56w-f-12065-17-854437/
Yeet
Mistä ostit ton änkän
Änkkä oli hussessa jo ostaessa kiinni ja siinä oli ihan husqvarnan leima kyljessä, mut ulkosesti tais olla täysin samannäkönen kotarin hgs änkkään verrattuna.
Mitäs osia tästä löytyy?
En jaksa alkaa luettelemaan :D mutta videosta näkyy ja tekniikka lukee reveal videon deskissä
onks toi twentyn vaihepoljin wr hussesta
Wr husseen tarkoitettu poljin, menee suoraan sm
Where did you get the cdi and battery holder?