@@cosmostreamer4773 It doesn't matter how good it is if they won't support the FPV community such as INAV or Ardupilot. We have all seen this before and it's just a matter of time before DJI gets too cocky and someone else comes along and will give customers what they want. The market will decide.
Hello. Do you have any product for the Mavic 3 Classic? I have the DJI RC Controller, and need HDMI OUT to connect the drone to my Atem Mini Extreme. Congratulations for the amazing products!
Hi! Yep ruclips.net/video/zNy2B2myD4I/видео.html but this can work ONLY with DJI RC-N1 or DJI RC-N2 controllers (without a display). Only this controllers support USB connection (DJI design).
@@cosmostreamer4773 Thanks very much for the reply. One question: Since I will have to buy the RC N1 controller, what are the advantages of using Cosmo Streamer when comparing with my cell phone DJI App using the RC N1 RTMP function?
@@wagnercs I have no idea, I just give one more way :-) By feedback from some of my customers RTMP bitrate (and resolution for some drones models) is much lower than a real time stream for DJI Fly that is used in Cosmostreamer. And HDMI out is a good thing out from the box.
When you turned off the OSD in the goggles, does that affect what you see in the goggles and not the output? I would still want to see the OSD in the goggles so I can manage my battery voltage while having a clean HDMI out is this the case? Been using your software for years in a professional setting. Great stuff!! Keep it up.
Hi! I’ve purchased the Lite version. (Don’t have it in hand yet) Quick question: Is it Goggles2 >USB-C to USB-A dongle>USB-A to Micro USB>Cosmostreamer Lite….and then HDMI to monitor? And powered via goggles over USB?
hello, I need a broadcast worthy transmission signal from a DJI drone. The Mavic 3 (O3+) live feed from the PRO transmitters HDMI is OK, but not that great! I see a lot of artifacts and I'm looking for better! I hope the Occusync 4 signal from the DJI AIR 3 is better than the O3+. Is there a possibility to test the software? thank you in advance. Gregory.
@@juancarloshernandezmota4163 with Goggles2 or Integra video stream is 1080@60p On HDMI any resolution is available up to 1080@60p, interlaced is possible too.
@@cosmostreamer4773i figured that out. I didn't realize it was mini HDMI. Also does the raspberry pi somehow bypass remote ID? Cause i got my Avata flying without having to plug into my phone first and while plugged into the cosmobox. Amazing little gadget!
Are these people serious! This is why I am converting my gear over to Walksnail. Keep it up DJI, you are literally alienating a whole FPV community.
DJI still the best link :-)
@@cosmostreamer4773 It doesn't matter how good it is if they won't support the FPV community such as INAV or Ardupilot. We have all seen this before and it's just a matter of time before DJI gets too cocky and someone else comes along and will give customers what they want. The market will decide.
A long time I hear "A new Pocket Osmo killer", "A new DJI Ronin killer", "A new DJI Goggles killer"... :-)
It's just a new holywar, like "Intel VS AMD", "Nvidia VS AMD", "Iphone VS Android", etc
@@cosmostreamer4773 LOL true!
Do you need usb-c otg or regular usb-c for DJI goggle v2 (so the older model)?
Hello. Do you have any product for the Mavic 3 Classic? I have the DJI RC Controller, and need HDMI OUT to connect the drone to my Atem Mini Extreme. Congratulations for the amazing products!
Hi! Yep ruclips.net/video/zNy2B2myD4I/видео.html but this can work ONLY with DJI RC-N1 or DJI RC-N2 controllers (without a display). Only this controllers support USB connection (DJI design).
@@cosmostreamer4773 Thanks very much for the reply. One question: Since I will have to buy the RC N1 controller, what are the advantages of using Cosmo Streamer when comparing with my cell phone DJI App using the RC N1 RTMP function?
@@wagnercs I have no idea, I just give one more way :-) By feedback from some of my customers RTMP bitrate (and resolution for some drones models) is much lower than a real time stream for DJI Fly that is used in Cosmostreamer. And HDMI out is a good thing out from the box.
Hello friend, I'm trying to buy the software but when I confirm the order, the error occurs. Can you answer me?
When you turned off the OSD in the goggles, does that affect what you see in the goggles and not the output? I would still want to see the OSD in the goggles so I can manage my battery voltage while having a clean HDMI out is this the case?
Been using your software for years in a professional setting. Great stuff!! Keep it up.
OSD in goggles shows always. It can be turned on/off only in USB video output and in in-goggles video recordings
I'm from Brazil, I'm trying to buy but it's giving me an error. I have a certain urgency
Hi! I’ve purchased the Lite version. (Don’t have it in hand yet) Quick question: Is it Goggles2 >USB-C to USB-A dongle>USB-A to Micro USB>Cosmostreamer Lite….and then HDMI to monitor? And powered via goggles over USB?
Here is the wiring manual for Lite cosmostreamer.com/products/djigoggles2/Cosmostreamer-Lite-DJI-Goggles2-WiringManual.pdf
@@cosmostreamer4773 Perfect! Thanks so much.
Hello, can I use this with DJI FPV Goggles3? Thank you.💌
Yes, all the same as with Googles2
Hello,
Can I also buy a license from Germany for my Cosmostreamer?
Is it possible to use the Mavic 3 Classic via the DJFlyapp?
Hi! I trying to sent reply on your emails but got error "recepient address not exists"
Is it Compatible to DJI Mavic air 2?
cosmostreamer.com/products/djiflydrones/
hello, I need a broadcast worthy transmission signal from a DJI drone. The Mavic 3 (O3+) live feed from the PRO transmitters HDMI is OK, but not that great! I see a lot of artifacts and I'm looking for better! I hope the Occusync 4 signal from the DJI AIR 3 is better than the O3+. Is there a possibility to test the software? thank you in advance. Gregory.
Hi! Yes, sure, test is possible. Send me email on cosmostreamer@gmail.com please
How much video delay does it have?
With Goggles2 near 150ms and 130 ms with V1/V2
@@cosmostreamer4773 Is there any difference in delay with rcpro dji is it less?
Most of latency on encoding side, decoding latency is the same on RC Pro and in CS
What resolution is it in that I am going to use it for a video switcher and how much warranty does it have?
@@juancarloshernandezmota4163 with Goggles2 or Integra video stream is 1080@60p On HDMI any resolution is available up to 1080@60p, interlaced is possible too.
Is it possible to display OSD on the screen?
If use dji goggles v2 with o3 air unit?
With V2 - no. Only with G2 or Integra
Hallo, is it mandatory to purchase a license for use with Goggles v2 and vista unit ?
Yes
For DJI Air3 is it possible when i use RC2 to get clean output
Nope, for Air3 only RC-N2 can work with USB client.
Work with DJI V2 and o3?
Yes
@@cosmostreamer4773 perfect! And if don't show up osd the battery osd show on my goggles? Or add osd and rescaling for don't show up?
@@argentinaerialsFPV There is no OSD in USB video stream from V2 goggles, only a clean video.
@@cosmostreamer4773 excelente!! Thanks
What is the HDMI cable you are using. That looked like micro USB not HDMI
The box has two Micro-HDMI outputs
@@cosmostreamer4773i figured that out. I didn't realize it was mini HDMI. Also does the raspberry pi somehow bypass remote ID? Cause i got my Avata flying without having to plug into my phone first and while plugged into the cosmobox. Amazing little gadget!
Are both HDMI ports active to feed two monitors with the same image? Or only one? @@cosmostreamer4773
What is the name of this equipment and does it have a link to buy it?

shop.hipi.io/product/cosmostreamer-box-for-dji-avatao3-with-dji-goggles2
Can I setup the cosmostreamer on my Raspberry Pi 4 or 5?
@@Johow Raspbery Pi 4 - yes. But not Rpi5
Would it work with Dji googles 3?
Yes, Goggles3 already tested, works the same as Goggles2 or Integra
@@cosmostreamer4773 thanks for the prompt reply!
@@cosmostreamer4773I’m curious the latency from DJI goggles 3…is it minimal enough to be able to do precise maneuvers? Thx.
@@jeremydenief the latency is the same as in DJI Fly app, minimal as possible.
@@cosmostreamer4773 thanks!
where the power cord was connected ?
shop.hipi.io/product/cosmostreamer-box-for-dji-avatao3-with-dji-goggles2
I’m trying to connect to a live stream and output 1080 res at 60fps is that possible with this?
With Goggles2 or Integra - yes, 1080@60p
@@cosmostreamer4773can i take away 25 or 50 fps?