Thanks for the upload and also being a great Teacher :), i seriously don't know how you don't get more views and subs i learnt more off you in a clear manner than 99% of the other videos i watched
Hi sir thank you once again for sharing your knowledge. May video na din po ba kayo about sa bevel gear naman po? Thank you sir and more power po sa RUclips channel mo.
Thank you for your comment Steam Engine. Normally, in machining cut, there are two cuts that we must apply, the roughing and finishing cuts, but this also depends on the allowance or excess material on the workpiece and this is what im trying to give emphasis in order for the students or new learners in the machine shop/machining works learn and practice the safer and more accurate method. Machining the workpiece in just one cut(ROUGHING) is also possible especially when the rigidity of the machine, the cutting tool and the work is excellent and when accuracy and surface finish required are not so important, in other words, quantity is more important than quality. God Bless!
gud morning po sir johnny.gsto ko sana matuto 2:46 ng mag groove at reangle ng mga bell at pully sa mga motor gsto ko sna matulungan nio po ako.from taal.. batangas..
Hi Randy, pumasyal ka dito at dalhin mo yang workpiece mo para mapag aralan natin at saka natin subukang gawin. You may also call me at my cellphone number 09166580548. Thank you.
Hi, simple lang, hanapin mo ung 16 sa inch threads na nasa plate ng lathe. Icheck mo ang vertical at horizontal columns na katapat ng 16 para sa numbers or letters at don mo iset ang knob lever or spin type lever sa quick change gear box. Panoorin mo din yong video ko na Setting up the Lathe for Cutting 60° Threads. Thank you and Happy new year!
Hi Reymond! 73 is not divisible by any number so you must use differential indexing. Sundan mo lang yong solution sa aking tutorial video na differential indexing method. Thank you for watching and subscribing.
Maraming adjustment po sir Johnny wla po bang shortcurt method para mas mabilis ang gawa pwede nman po tayo mag center nang gear cutter sa foot stock without dial guage..
Hi Angelo, it's your choice what method in gear making you prefer. Any method can do, but i found my new method more accurate than anyone else. Thank you once again for your continuous support. God Bless!
Pwedeng pwede Angelo. kaya ko nga binagalan ang feed rate para sa finishing cut pero diko na inin crease ang spindle speed dahil sa low quality ang material ng gamit kong gear cutter. So isa rin ito sa mga factors na isaalang alang natin sa roughing and finishing cuts.
I learn so much from you, please keep it up
Very Informative Prof. thank you for always sharing your knowledge and wisdom, keep it up po😊
Thanks for the upload and also being a great Teacher :), i seriously don't know how you don't get more views and subs i learnt more off you in a clear manner than 99% of the other videos i watched
Very nice tutorial. Wish I could take some in person classes from you. I just purchased my first mill and have a lot of learning to do.
Thank you Mr. Honor, hope we meet someday and you may also see my machineries for sale. God bless!
Sana helical gear step by step naman sa susunod🙂 ganda ng tutorial video nio sir. Very informative
Thank you for the video tutorial Prof Johnny very well explained and informative
Glad you liked it
What a smart professor..I am enjoying every videos you are posting sir! Hats off!
Well explained prof. You're So intelligent
Thank you sir Eduardo for your encouraging remark! God Bless!
Watching from BSME - 1B, very informative!
Your work is so amazing Sir Professor.
Intelligently explained
Thank u sir give us good knowledge in milling machine working types all work out
Thanks very much you did a lot of work there, fair play to you.
Sa helical Naman sir step by step procedure.... thanks and happy new year...
Hi sir thank you once again for sharing your knowledge. May video na din po ba kayo about sa bevel gear naman po? Thank you sir and more power po sa RUclips channel mo.
Where are you from Sir?
Your video was and is very very helpful
How do you set the speed and feed as well as depth of cut per pass to prevent chatter and overloading the cutter. Thank you in advance.
Very informative video lolo.
Thank you John Jericho for your encouraging remark! God Bless!
thank you prof for sharing your knowledge to us.. 😊
Salamat po prof sa bagong learnings
Thank you po I learned a lot 🥰
Good day sir gawa ka dn ng tutorial pra sa helical gear at bevel gear na step by step sir. Salamat and God bless
how if we do complete cut in single time indexing ? two or even three times indexing (one for notching) is very not productive
Thank you for your comment Steam Engine. Normally, in machining cut, there are two cuts that we must apply, the roughing and finishing cuts, but this also depends on the allowance or excess material on the workpiece and this is what im trying to give emphasis in order for the students or new learners in the machine shop/machining works learn and practice the safer and more accurate method. Machining the workpiece in just one cut(ROUGHING) is also possible especially when the rigidity of the machine, the cutting tool and the work is excellent and when accuracy and surface finish required are not so important, in other words, quantity is more important than quality. God Bless!
gud morning po sir johnny.gsto ko sana matuto 2:46 ng mag groove at reangle ng mga bell at pully sa mga motor gsto ko sna matulungan nio po ako.from taal.. batangas..
Hi Randy, pumasyal ka dito at dalhin mo yang workpiece mo para mapag aralan natin at saka natin subukang gawin. You may also call me at my cellphone number 09166580548. Thank you.
Nice vids po prof johnny :)
Hi Arvin, thank you for you have found my tutorial videos nice and useful. God bless!
Thank you Sir..
ahh.. TUP Manila days! reminds me of Sir Resty Ayos.
Yes sir, but sir Resty Ayos already passed away. Thank you for watching and subscribing. God Bless!
@@profjohnny8624 God bless din po Sir Materum. Batch 2010 po ako graduate. More power :)
Prof jonny pano po ipatayo yang feviding head sir
Sir may tutorial din po ba sa iba pa pong types of gears helical, bevel, etc. Thanks po
Good day Sir may itatanong po aq about sa Lathe paano mag set up sa Gearbox kung ang gawin kung thread 16G
Hi, simple lang, hanapin mo ung 16 sa inch threads na nasa plate ng lathe. Icheck mo ang vertical at horizontal columns na katapat ng 16 para sa numbers or letters at don mo iset ang knob lever or spin type lever sa quick change gear box. Panoorin mo din yong video ko na Setting up the Lathe for Cutting 60° Threads. Thank you and Happy new year!
Good Mrning sir, pano gumawa nang helical rack gear sa milling machine.
Hi Agustin, abangan mo at malapit kona gawin ang tutorial video para sa helical gear. Thank you for watching and subscribing.
Sir anu po bang index plate ang pwede ko gamitin sa 73 teeth spur gear
Hi Reymond! 73 is not divisible by any number so you must use differential indexing. Sundan mo lang yong solution sa aking tutorial video na differential indexing method. Thank you for watching and subscribing.
sana po boss, un nmn formula ng gearing kng pno pgkuha ng no.of teeth ng compound gears. mdyo po xe nkakalito. un po sana pinaka shortcut n way.
Maraming adjustment po sir Johnny wla po bang shortcurt method para mas mabilis ang gawa pwede nman po tayo mag center nang gear cutter sa foot stock without dial guage..
Hi Angelo, it's your choice what method in gear making you prefer. Any method can do, but i found my new method more accurate than anyone else. Thank you once again for your continuous support. God Bless!
Bakit po sir john d po ba tayo pwede magdadag nang cutting speed for finishing cut specially mild steel ang workpiece po or steel. Thanks.
Pwedeng pwede Angelo. kaya ko nga binagalan ang feed rate para sa finishing cut pero diko na inin crease ang spindle speed dahil sa low quality ang material ng gamit kong gear cutter. So isa rin ito sa mga factors na isaalang alang natin sa roughing and finishing cuts.
For sale din po ba yung milling na gamit nyo prof?
Hi Gear Up!
Yes, for sale po cia, direct from Japan.
Mag kano po prof at san po location?
ayos Pre monitize k n pla dami mo ads
Hi pareng Prof Jojo. Thank you for visiting my channel. Please share the videos to your students there in Oman. Regards!
👍👍👍
sna po mapansin nio po ako.slamat po
Kuya anu requirements mag aral dyan
Hi Aklas, high school graduate, walang sakit. thank you for watching and subscribing. God bless!
pagawa reflection