I don't know if you are still doing this but, thank you for this video. This is the first one that I can totally understand and I think I can do this. I have just started doing things like this and have a horrible time finding videos that make sense to me. Again, thank you.
for that hard to get to place you could wrap the ear in the parchment paper so its covering front and back of the ear and use a thin hair straightener. Not sure if anyone else suggested that.
Hi, great tutorial! I worked on one last night and I found that I needed to fold the ears backwards and squish him that way for those pieces that are close to the head. I wish I had come across your measurements before I had so many fails last night, lol.
Thank you for the tutorial, it was super easy to follow. You mentioned in one of the comments that if the vinyl lifts you can use vlr to remove the vinyl. Can you tell me what vlr stands for please?
Do you know how you would go about putting a bow on the top of it like I see on Etsy all the time? I’m terrible at sewing and was wondering if fabric glue would work?
@@CorinneBlackstone ok thank you.. i just ordered an elephant so wish me luck lol x.. im sure I'll be watching your great tutorial a few more times first x
I made one of these but I made a mistake on one ear. What's the best way to remove the htv? I tried acetone but it didn't work. I don't want to have to throw away the elephant. Help, please!
What Iron on do you use? I bought the everyday iron on by Circuit and I used up half the roll trying to figure out how to use it/ weave it. I did everything correct. Shiny side down., I mirrored the image and Turned the knob to the iron on setting, when that didn’t work I used the custom setting pressed on iron on. I then edit it and made the settings to 3 cuts and more pressure and that didn’t even work. When it’s all finished I pull it out and all I could see if dots/ holes. I don’t see anything of the stats until I pull up the iron on and see the letters/ numbers but it’s just stuck. It won’t allow me to weed it. It’s all stuck together. I got so distracted after many hours trying to weed this little design. So done. I knew I stay away from anything iron on for a reason. Lol
![Gunna - HIM ALL ALONG [Official Video]](http://i.ytimg.com/vi/w7Wf0h1Q8a4/mqdefault.jpg)
Great tutorial. It's adorable. I love that you used an iron, since I haven't invested in an easy press. Thank you so much!
I don't know if you are still doing this but, thank you for this video. This is the first one that I can totally understand and I think I can do this. I have just started doing things like this and have a horrible time finding videos that make sense to me. Again, thank you.
I’m glad you found it helpful! Yes I am still making videos!
for that hard to get to place you could wrap the ear in the parchment paper so its covering front and back of the ear and use a thin hair straightener. Not sure if anyone else suggested that.
Oh I love this. My great grand daughter's nursery is decorated in elephants.
Oh how I love your videos
you explain so well (I like to say from the beginning to end)lol
He came out cute Thank you
Hi, great tutorial! I worked on one last night and I found that I needed to fold the ears backwards and squish him that way for those pieces that are close to the head. I wish I had come across your measurements before I had so many fails last night, lol.
Thank you for the tutorial, it was super easy to follow. You mentioned in one of the comments that if the vinyl lifts you can use vlr to remove the vinyl. Can you tell me what vlr stands for please?
Vinyl letter remover
Such an awesome tutorial, thanks for showing us.
So cute...always impressed ❤❤❤
I´m doing mine after this.Thank you for the tutorial.
What vinyl did you use??? I know you put the link but can you tell me the exact one???
This was a while ago but I think it’s siser easyweed www.143vinyl.com/12-inch-x-15-inch-siser-htv-sheets/?partner=196113
@@CorinneBlackstone Thank you so much!!!! One last question. You didn’t use transfer tape i this video correct? Just the vinyl?
Hi! What's the heat press setting? How many seconds?
Thank you ….💕
Do you know how you would go about putting a bow on the top of it like I see on Etsy all the time? I’m terrible at sewing and was wondering if fabric glue would work?
E6000 would work. but you can get these in pink with a bow as well amzn.to/34QA7sO
I have a heat press but do u think i should use my iron instead ?
Either will work. I have used my heat press as well
@@CorinneBlackstone ok thank you.. i just ordered an elephant so wish me luck lol x.. im sure I'll be watching your great tutorial a few more times first x
Do you know how you would fix it if some of the vinyl has lifted after a period of time?
Use VLR to remove the vinyl and redo it or try pressing it again if the vinyl is still on the animal
I LOVE THIS
Great video! How do you pack and ship these?
What an adorable idea, love 💗 it thanks for the tutorial!
I made one of these but I made a mistake on one ear. What's the best way to remove the htv? I tried acetone but it didn't work. I don't want to have to throw away the elephant. Help, please!
I just messed up and I used acetone nail polish and took an hour, but got it all off and elephant is fine now.
Can you use a flat iron?
Niecee White yes you can.
Question....I made a shirt with htv.....when I put it on and it's kind of coming undone...can I put the iron back on it?? If so how?
Yes you can reiron it. Its coming up likely do to not enough pressure
Hi, just wanted to know what is the setting for the iron. Thank you.
Cotton
Do you use the first letter of there last name or do most people was the first letter of the first name.
Its up to the person. In this case it was the last name
It is beautiful
Thank you
Which font did you use for the name?
This was a long time ago. I truly do not recall :(
How would you wash it
Wash according to the stuffed animal directions.
@@CorinneBlackstone thank you
What is the clear plastic backing that the C was on and The stats? What is it called?
its the transfer mask that comes on the HTV. its how you move it to your project and hold it in place.
So there is nothing extra to buy? Sorry but this will be my first time using HTV.
@@broskoniesaidanalexis4442 nope you should be good to go with just HTV the elephant some parchment paper and an iron
What Iron on do you use? I bought the everyday iron on by Circuit and I used up half the roll trying to figure out how to use it/ weave it. I did everything correct. Shiny side down., I mirrored the image and Turned the knob to the iron on setting, when that didn’t work I used the custom setting pressed on iron on. I then edit it and made the settings to 3 cuts and more pressure and that didn’t even work. When it’s all finished I pull it out and all I could see if dots/ holes. I don’t see anything of the stats until I pull up the iron on and see the letters/ numbers but it’s just stuck. It won’t allow me to weed it. It’s all stuck together. I got so distracted after many hours trying to weed this little design. So done. I knew I stay away from anything iron on for a reason. Lol
@@broskoniesaidanalexis4442 make sure you are cutting on the correct side. Shiny side down. My iron is just a regular home iron by black and decker
Can’t see it
If your video is showing black close RUclips and reopen the video. This has been happening to me on all sorts of videos
If you want words and hearts to be a separate color than the numbers how do you do that so individual letters do not need placed on?
Select all items of one color are and attach and then do the same thing for the next set of color
How did you had it in clear before iron it. I miss a step.
The clear carrier sheet? It comes already attached to that.