Wow, I just love the simplicity of this vice, lightweight,portable and very pleasing on the eye ...what's not to like; will definitely be following your other videos. Thank you for taking the time to make it.
Год назад
Oh man! Thats genius. Easy to carry, simple, and looks like a hard grip. ill do one for me right now
10 1/4 long X 4 3/4 wide X 1 3/4 thick. I think I have some white oak firewood that is not going to get burned for this project. Love the idea and design!
Whether the use is yours or not, that was some awesome carpentry! To use angle iron for the metal vise jaws and then plain wood for the wood vise blew me away. The west may have some advanced tools for metal and wood working, but your tools are based on centuries old designs that I would love to have, since they work much more carefully and skilfully. I was fascinated by your entire video. Domo Arigato!
It may have been covered elsewhere in the comments but here goes: I liked what you did - simple, affordable and achievable. I'd have liked a subtitle into at least English of what two of the coatings were - the wood coating was simple but I wasn't quite sure what the metal coating was. BUT! The camera shake was a serious blemish for an otherwise well-produced video. Every time you actually did something, the whole image blurred. A tripod sitting on the floor or a separate table or stool perhaps? Even a piece of timber clamped to something else and overhanging the workbench to mount the camera on. I enjoyed the light background music - what was it?
I like your idea of using the steel angle pieces to convert a wood vise to a metal vise. I can use that idea to temporarily convert my bench woodworking vise and my portable workbench for light metal work. Arigatou!
Japanez carpenters and woodmaster is the best of the bestmaster on the world.Each wood works from Japanes hand is the bigest Artwork.Amasing,im impresed.
Daniel Robertson , i saw it too, but i think he taught us about it separately. Or we can understand that with professor : First is perfect material to do any thing. Ha ha
Excellent. But may I make a humble suggestion: to place the iron angles FLUSH with the Wood jaws, and to use larger iron angles, so you have a larger surface. I would use flat head crews, coutersunk the holes in the iron angles, so that the screw heads don't protrude...just a suggestion! Best Wishes from Mexico.
Thank you for watching.This design is mine but it is common, and idea of using clamps is not mine.I referred to the video which I watched in RUclips in the past. I have forgotten that video.Maybe > > > ruclips.net/video/2xa5bZ_Ek5M/видео.html
It's exactly what I need too. I made a very nice looking woodworking bench but it's used for other purposes as well. I don't want to install a large or not so good looking woodworking vise on it. This vise will fit the bill, and it's not a permanent attachment to my bench.
Great concept, simple design and useful...but instead of making by hand and time consuming a cnc router can make this in 1:10 of the time and much, much more precise....unless time and precision are not an issue...or access to cnc is not an option.
CNC is a bit like mobile phones... It robs people from the capacity to think with their own minds / hands. In the long run it destroys more than it benefits. Try a week without electricity and see how it makes you feel.
Nice .. but i think the metaliques parts is mor estitiqual and mor nice if it is in the curving of the wood not in out of this ones ...it's just idea ❤
Wow, I just love the simplicity of this vice, lightweight,portable and very pleasing on the eye ...what's not to like; will definitely be following your other videos. Thank you for taking the time to make it.
Oh man! Thats genius. Easy to carry, simple, and looks like a hard grip. ill do one for me right now
cool yet simple design
Fantastic! I'm watching many of your videos and you have many great ideas and designs. Thank you for sharing these!
とてもセンスが良いです！
Another day! Another ingenious idea from the Sensei! Thank you.
Seeing you struggle with this makes me think that you really needed a vice in order to make your vice! Nicely done.
10 1/4 long X 4 3/4 wide X 1 3/4 thick. I think I have some white oak firewood that is not going to get burned for this project. Love the idea and design!
日本の伝統工具のみ、かんなは素晴らしいです。
Excellent tortorials keep it up
バイスに合わせてバイスで挟むのはデスク上で使用出来るので良いですね、また金属もは挟めますね欲しいですね・・・
I would so very much enjoy your videos WITHOUT the music....listening to you work is music enough!!!
this is wonderful! I'm going right to my shop now!
Whether the use is yours or not, that was some awesome carpentry! To use angle iron for the metal vise jaws and then plain wood for the wood vise blew me away. The west may have some advanced tools for metal and wood working, but your tools are based on centuries old designs that I would love to have, since they work much more carefully and skilfully. I was fascinated by your entire video. Domo Arigato!
It may have been covered elsewhere in the comments but here goes: I liked what you did - simple, affordable and achievable. I'd have liked a subtitle into at least English of what two of the coatings were - the wood coating was simple but I wasn't quite sure what the metal coating was.
BUT! The camera shake was a serious blemish for an otherwise well-produced video. Every time you actually did something, the whole image blurred. A tripod sitting on the floor or a separate table or stool perhaps? Even a piece of timber clamped to something else and overhanging the workbench to mount the camera on.
I enjoyed the light background music - what was it?
It was worth watching this video for the knot filling trick as much as anything.
Lovely and a simple idea, I shall be borrowing your design!
I like your idea of using the steel angle pieces to convert a wood vise to a metal vise. I can use that idea to temporarily convert my bench woodworking vise and my portable workbench for light metal work. Arigatou!
Awesome vise. I will make one.
Next on the list to build, is a solid workbench!
Such an elegant solution
Simple, beautiful and very functional! Thanks!
なるほどーーー、金工用と木工用はアングルを外すのかと思いきや、「裏返す」んですね。
これは、素晴らしい。。。。
でも、厚い材か貼り合わせて厚みを出さないとだめですが。。
Good idea!!! Thank you for sharing this.
Interesting. I've often improvised basically the same thing, but making a nice dedicated unit could be useful. Thanks.
Well done, and nicely produced presentation
Japanez carpenters and woodmaster is the best of the bestmaster on the world.Each wood works from Japanes hand is the bigest Artwork.Amasing,im impresed.
Fantastic idea 👍👍👍👍
As usual, simple is efficient and elegant. It looks like you are full of good ideas!
Very nice!
Very simple yet very useful.
Great Job Maestro!
Cheers from Chicago USA...
Thank you. I may use this.
This is GREAT !!! Thank you.
You gave me a great idea. Many thanks.
Lol did that work to fill that knot hole and you just ended up cutting it out. Haha. You’re awesome man! Love the build! Thanks for sharing.
Daniel Robertson , i saw it too, but i think he taught us about it separately. Or we can understand that with professor : First is perfect material to do any thing. Ha ha
Was wondering why he went to all the trouble of filling the knot-hole,only to cut that section out & throw it away ?!
はじめまして☺たすかります!すごく良い動画です✨
Great video and process. Excellent idea. Thanks for sharing.
素晴らしい仕事!!!....απιθανη δουλεια μπραβο !!!
Definitely my next project. So many uses!
Excellent. But may I make a humble suggestion: to place the iron angles FLUSH with the Wood jaws, and to use larger iron angles, so you have a larger surface. I would use flat head crews, coutersunk the holes in the iron angles, so that the screw heads don't protrude...just a suggestion! Best Wishes from Mexico.
I think your suggestion is correct. Thank you!
I love good ideas . Thank for to share your ideas with us.
Nice first minute. :-) cutting that away later will get people thinking at least twice :-D
This is Brilliant and just what I need!! =)))))) thank you!!!
Thank you for sharing. Ill have to craft one for myself. Also, beautiful 🎶
折角、埋めた節が結局使われなかった所で、ちょっと笑いました。
あくまでも、ちょっとした工作を行う際に使う簡易なツールとしては、十分な機能ですね。
もう少し幅の狭い小型の物を、僕も作ろうかなと思います。
A perfect, a great work and a very good idea thanks for sharing :) :) :)
Gonna make one of them!
Whole time I was wondering on what side did that knot ended up. And then you removed it. :)
nice. thanks for the video. gotta make this one!
Nice build! Thanx for eng annotations too.
Стол трясётся -- не ставьте на него камеру.
Отличная работа! Спасибо за музыку!
This is exactly what I have been looking for!!
Thank you for sharing this!!
Is this your design?
Thank you for watching.This design is mine but it is common, and idea of using clamps is not mine.I referred to the video which I watched in RUclips in the past. I have forgotten that video.Maybe > > > ruclips.net/video/2xa5bZ_Ek5M/видео.html
It's exactly what I need too. I made a very nice looking woodworking bench but it's used for other purposes as well. I don't want to install a large or not so good looking woodworking vise on it. This vise will fit the bill, and it's not a permanent attachment to my bench.
That one gets build tomorrow! Thanks so much for sharing!!
lo mas simple es lo mejor!!! te felicito desde Argentina, gracias por compartirlo!!!
Thank you for the video. What is the chemical you treated the steel with that turned it black?
The chemical has the effect of rust prevention. It is a product similar to Gun Blue. However, it is cheap. Thank you for watching.
That was great work but why plug the hole then just throw it away never would have thought to plug a hole like that
いつも楽しく拝見しております。
クランプ３つで卓上バイスすごいなぁ~
手軽に持ち出せていいアイデアですね。
既に卓上にド~ンっと固定しているバイスと併用したり、同じ簡易バイスを二つ使えば長尺物の固定も可能になりますね。
L字金属に乳白色？の液体を塗布されていましたがあれは何ですか？
まぁ~結果残念だった節穴埋めも勉強なりました。
治具製作動画ってアイデア豊富で面白いですね毎度驚きの連続です、次回もよろしくお願いします。
コメントありがとうございます。
L字金属に塗っていたのはソフト99の「赤サビを黒い防錆被膜に変える」という商品です。
その名の通りサビ止めです。ペンキよりも付着力が強いので使ってみました。
excellent idea..you´re a genious!!!..thanks for sharing
Great....I'll do it. Thanks for sharing.
Was that Tung or linseed you applied to the wood? Excellent build. I'm subscribing!
That was polyurethane resin. Woodworking vegetable oils are very expensive in Japan. I want to use beeswax.
Thank you for watching.
@@fareastwood I'm sure Japan has plenty of ancient tricks for woodworking that make up for it!!
una bravura e una manualità superiore
Nicely done, but there are many simple ways to secure work to a sturdy work bench - which appears to be what you need most.
Muy lindo trabajo!!!. Gracias por compartir.
アイデアすばらしいですね！！でもせっかく埋めた節の所切っちゃったのはうけました(笑）
Complimenti una bellissima manualità Fabrizio .italia
Lovely work and a pleasure to watch, Thank you. Just one question, what was the liquid that you coated the steel with?
It is the liquid for black rust processing. Thank you for watching.
@@fareastwood Thank you :-)
Good video and very job..thanks
Beautyful..! I shall build one myself tomorrow..! Thanks for sharing.
It's marvelous, thank you for sharing.
Very nice video, very nice working in progress !
Simple elegance
Excellent video, technic, idea.. . But please next time change the music
Music is awesome 😀😀😀
Marvelous!
As in Japan, visited ... Quietly, steadily, efficiently, look and have a rest. Thank you!
Отличная идея.
Взял еë, может быть пригодится.
Однозначно ➕.плюс.
Excelente diseño, muy práctico.
Very Nice! Thank you.
良いアイデアだと思いました！途中鉄に塗っているのが何なのか教えてもらえると嬉しいです！
コメントありがとうございます。
ソフト99の「赤サビを黒い防錆被膜に変える」という商品です。
ホームセンターだとカー用品コーナーにありますよ。
@@fareastwood さん ありがとうございます！勉強になります😆
良いですね、制作販売はしないのですね
Great concept, simple design and useful...but instead of making by hand and time consuming a cnc router can make this in 1:10 of the time and much, much more precise....unless time and precision are not an issue...or access to cnc is not an option.
CNC is a bit like mobile phones... It robs people from the capacity to think with their own minds / hands. In the long run it destroys more than it benefits. Try a week without electricity and see how it makes you feel.
Clever
Good ones,I'm in
percebe-se o amor sendo transmitido a peça.
parabéns.
oh I'm sorry for throwing this scrap metal. Thank you very much my friend. for this
Good idea my friend!! Awesome job. Good lock!
Nice .. but i think the metaliques parts is mor estitiqual and mor nice if it is in the curving of the wood not in out of this ones ...it's just idea ❤
I need one of these. thanks for sharing.
well design
Perfect thanks a lot :) :) :)
love it.
こんにちは。金属用の万力は全体に押さえられないのでいまいちかな。
鉄工用の面にバイス部分のL字金具と同じ厚さの鋼板を付けて面合わせしたときの隙間を無くしたいと思ったのは自分だけだろうか?
Nice
Чуваку надо было как-то убить время - он преуспел в этом, молоток! Правда и я тоже убил чуток своего времени, уставившись в это видео…
構造簡単で作り易そうですね。
私のワークテーブルに万力が固定してあるのですが幅が足りない時があるので同じものを作ろうと思います。 ありがとうございました。 (*^^)v
ありがとうございます。
参考にしてもらえると、動画投稿者冥利に尽きます。←「みょうり」ってこんな字だったんだー！発見
Prima Lösung!
Why not use a western workbench with a traditional vise?
Сомнительная польза от данного приспособления, но за идею +1
wonderful vise but please don't put your camera on the work bench. i got so motion sick watching this. thanks
Brilliant!