I personally can't justify upgrading from my £609 LP pro1 (deluxe kit) because of the differences in price ($1899 just the engraver) compared to similarly powered engravers at a fraction of the cost, like the XTool pro range or Atomstack engravers. Especially when factoring in the cost of all the additional and some essential accessories one requires. This product's only fundamental advantage (like it's predecessors) is the portability. The effectively small 'static' engraving area is also a major factor, because anything larger will require the purchasing the 'optional' powered accessories. In conclusion, I cannot fault the product range for it's amazing build quality and again I'll mention how portable their entire range is. but this is another beautifully made product for the DIY enthusiasts, with a substantial reserve of cash to spend on an (all be it admittedly) 'above normal par' consumer-grade laser engraver product. This is of course my humble opinion, I could be wrong. 😉 (Maybe I just haven't got that kind of spare cash laying around).
@@flyingmonkeys9774 Hi, I think I did a specific tutorial about that in the Mr Carve M1 video but if you want more specific can you look for a tutorial on RUclips? :DD
I was just a bit too late. I was actually looking for the Mr. Carve video and stumbled upon this beautiful thing. I was all ready to go for the Kickstarter, but then I read up and found it ended 5 days earlier.
I want to know if it does engrave deep or if it only does marking. I am interested in an engraving machine that does a great job with depth. Thanks for the answer.
Hope now I can make stamp (using photosensitive rubber) and cut it in one go. Before I need to cut using hot wire manually (to seal the edge too, so it won’t absorb ink and ruin the stamp with bleeding edge).
Far as I can see here, the main "upgrade" this offers is slick advertising. Costs too much for what it offers, despite the motivational music and seductive ad work.
The crowdfunding campaign will end in two days! I seriously doubt there will be at this low price EVER! GO GO GO, it's your only last chance! laserpecker-4-dual-laser.kckb.st/samiluo
@Jake Razmataz not high at all. I got the premium bundle based on this guy's video. Pretty sure it was 1700? It was in a weird currency and I didn't do the conversion.
Hi Sami, RUclips won’t auto-use timestamps from the description unless you start with a 0:00 timestamp. Could you please add that? That way the time stamps will appear in the video as well :)
Don’t own an engraver yet. Seems like a good one to start. Will it engrave the metal water bottles that are coated? Like a Yeti powder coated water bottle?
Yes it will, I have the laser pecker 2 and it works great, I just finished laser engraving into a hydro flask. Making customs for the nephews and nieces 👌🏼
If I had the money to buy a laser this would probably be the one, unfortunately as I was ripped off by one company a couple of years ago and will, never see what I paid for, I am reluctant to spend that kind of money ever again on KS. So unfortunately, I would rather pay the full retail price and get what I paid for than get ripped off again. It certainly looks impressive though. Have a good Valentines Day.
@SamiLuo, on black anodized aluminum, say with about 0.002" thick anodizing, would I be able to penetrate the anodizing and get an additional 0.001"-0.002" into the underlying aluminum? This is an important legal standard for NFA engravings I wish to be able to satisfy easily at home.
I have problems with the fact, that established corporations soource out their costs for rnd out to kickstarter. This is not how this works, gentlemen! What's next? NVIDIA or Intel starting kickstarter campaigns for the next product?
Hello, thank you for this great review. I don't find a Clear answer, do you know if we can use the new rotary extension from LP4 on a LP2? Thanks a lot for your feedback!
Thanks for the review. Would you say these are good for light/beginner commercial use? I have a LP1 Pro just to familiarize myself with the tech and have backed the Kickstarter for the LP4.
Yes, absolutely. The best part for the LP 4 is it comes with an intuitive App and you can basically do everything there. I've reviewed many others and they all have to connect to a computer and adjust this and that, lots of hassle
Sami...can you hook up your laptop to the lazerpecker 4? I think thats what the USB connection is for yes? Please let me know we will buy 2 units if we can use a computer ( not a cell phone) to control / send images- Thanks!
@@SamiLuo Thank you for the quick reply! Do you know what’s the laser power? I bought Mr Carve M1 Pro with 10W power and it couldn’t engrave on my gold plated silver jewelry 😢
Get the LaserPecker 4 from its official Amazon page: amzn.to/3ZHHgHZ or its official site: www.laserpecker.net/products/laserpecker-4?ref=OJZFnF5YK_8fhf.
Hi Great Review - I have pledged for the full set = 4 + Rotary + slider. What is the accessory that you show at 7:19 crawling along for a big engrave - I don't see this in the list of accessories?
Hi, thanks for the video. If you want to put up a small business but you are budget restricted, what version of laser pecker can you recommend in terms of quality and efficiency of work?.. hope you will find my comment.. thanks in advance..new subscriber here..
Thanks for asking. I don't know what engraving size and what main material you want to do for your business though, if mostly for normal things like wood or leather then I would say the first Laserpecker generation is good enough :DDD
hmmm it's made of vulcanized rubber right? that should be tricky... but i have never tried that material, you can ask this in the official laserpecker group to see if someone happened to try that for u
@@badgerwatkins Sorry I just confirmed with LaserPecker official again, seems it can't be compatible. LP4 needs 24v, while the previous power bank is only 12v
very very helpful! Do you happen to know if it can engrave different layers within glass or crystal? meaning, can it engrave within the middle of the crystal?
Do you know if this will engrave part numbers in steel parts? We currently pay another shop to do this to our manufactured aluminum and tool steel parts. Please help . Looking to buy one ASAP if it can. I know you mentioned stainless steel but we’re engraving plane steel. Thanks in advanced
Hi yes, it would be no problem at all, you can use the 1064nm laser for the plane steel :DD this is what sets it different from that 450nm, which only works for 304 stainless steel .. :DDDD
Hi we first designed all the letters and then set parameters for each based on the cube material and then previewed the printing area to make sure it would engrave properly, then the LP4 would automatically switch between 450nm and 1064nm laser to engrave at one pass. :D
@@SamiLuo Hi, thanks for answering. But the focus of my question is how you tell the LP4 to engrave at different positions. How does the LP4 know, where the different parts are positioned?
Hello. Hope you can help me by answering a question. When you engrave the ring inside, I noticed that you did not center the text, was this a mistake, or is it impossible to center the text do to the angle?
Hi, thanks for commenting. Actually I also noticed that, it can do perfect engraving for large sized rings, but not that good for extremely small sized ring but sorry I don't have time to test it carefully at the moment but I have forwarded your question to the official LaserPecker team, would you mind to join their official group and ask the official to test for you? Here is the group facebook.com/groups/1239220466858169
Thanks for asking... Honestly if you want the best metal and plastic engraving, then I think the Mr Carve M1 is still the best portable one on the market today, but if you want an all-in-one material engraving, then go to the LaserPecker 4.
Might be kind of a dumb question for you, but if you were to get a laser engraver with the proper ventilation and enclosure for it, would I be able to leave it unattended in my garage while I work on other things inside? I would really like to get one of these but if I need to be present at all times it’s running I’m not sure it’s for me. I just can’t spend hours a day attending to it just to monitor it. Maybe I could install a smoke detector like you have? Please let me know your thoughts on this, thanks!
Hi, thanks for asking. That's actually a very good question because everyone wants to use a machine in a safe and sound way! You can leave it unattended without worry, you don't have to spend hours being aside. I showed it has several safety measures at 10:50 like when it detects shield off or tilting it will stop automatically :DD
What an irresponsible responds. You don't leave a laser unattended. Especially when you work on organics, like wood. A fire can start in a couple seconds.
Hi, just having problem with my laser pecker 3 with green/red light keep flashing and showing that Bluetooth in abnormal connection. Any solution for this?
It's easy. I've got to say LaserPecker is the easiest laser engraer I've reviewed, their App is crazy good. You don't even have to connect to computer to use it, which is impossible for many other coreXY laser engravers.
WHY CANT LASER PECKER MAKE A METAL LASER ENGRAVER/CUTTER THAT IS COMPACK AND SIZE OF LASER PECKER 1. IMAGE A FIBRE LASER THAT IS SMALL AND AFFORDABLE LIKE THE LASERPECKER 1. WHERE U CAN SHOVE IN YOUR BAG AND TRAVEL WITH. Engraving or CUTTING ON METAL ITEMS. LIKE METAL KEYCHAINS/KNIVES/PENDANT ETC.
![BEST FIRST LASER? LaserPecker L1 Pro Super [FULL REVIEW]](http://i.ytimg.com/vi/57m_Vamdu1c/mqdefault.jpg)
The newest LaserPecker LP5 is here, check out the unboxing: ruclips.net/video/NwVUepSAiAY/видео.html
5 stars video! I just backed one premium bundle !
Thanks for watching. You made the right choice!
Thank you for the detailed and honest review .
I hope next week i receive my LP 2 .
Have fun!
Amazing well thought out and engineered product for the masses. Laser Pecker 4...
Can't believe I missed this video 🤦♂️ thanks for all this info Sami
I personally can't justify upgrading from my £609 LP pro1 (deluxe kit) because of the differences in price ($1899 just the engraver) compared to similarly powered engravers at a fraction of the cost, like the XTool pro range or Atomstack engravers. Especially when factoring in the cost of all the additional and some essential accessories one requires. This product's only fundamental advantage (like it's predecessors) is the portability. The effectively small 'static' engraving area is also a major factor, because anything larger will require the purchasing the 'optional' powered accessories. In conclusion, I cannot fault the product range for it's amazing build quality and again I'll mention how portable their entire range is. but this is another beautifully made product for the DIY enthusiasts, with a substantial reserve of cash to spend on an (all be it admittedly) 'above normal par' consumer-grade laser engraver product.
This is of course my humble opinion, I could be wrong. 😉
(Maybe I just haven't got that kind of spare cash laying around).
What lazer engraver would u recommend?
English subtitles have been upated. Spent a massive week on this video, please make sure to subscribe: www.youtube.com/@SamiLuo/
Video is very well done!
How did you use the Mr.Carve M1 with SeaCAD or EZCAD?
@@SR-te2db Thanks
@@flyingmonkeys9774 Hi, I think I did a specific tutorial about that in the Mr Carve M1 video but if you want more specific can you look for a tutorial on RUclips? :DD
100% buying and subbing best review for sure
If you want to buy, my company is selling them, so give me some feedback and we can make it happen!
I was just a bit too late. I was actually looking for the Mr. Carve video and stumbled upon this beautiful thing. I was all ready to go for the Kickstarter, but then I read up and found it ended 5 days earlier.
That's fine, they will put on sale some day :D
Good video! Glad I backed the project.
You definitely made the perfect choice
I want to know if it does engrave deep or if it only does marking. I am interested in an engraving machine that does a great job with depth. Thanks for the answer.
Hope now I can make stamp (using photosensitive rubber) and cut it in one go. Before I need to cut using hot wire manually (to seal the edge too, so it won’t absorb ink and ruin the stamp with bleeding edge).
yes.. new sub. good video. new to the game and want something easy to use and this helped me out a lot. thanks
Far as I can see here, the main "upgrade" this offers is slick advertising. Costs too much for what it offers, despite the motivational music and seductive ad work.
Come on man !!! I just bought the lp2 and know your saying I’m gonna have to save up for this one now?
same here just got it last weekend ...i would have waited for the LP4 .. but I do like the LP2..
LP2 is still my go-to laser engraver as well mate
Is this compatible with an iPhone?
@@DowneyBums yes
Yes
Este LaserPecker es mejor que un laser de fibra
I just wish they can come up with a laser engraver that can do colour laser on titanium
The crowdfunding campaign will end in two days! I seriously doubt there will be at this low price EVER! GO GO GO, it's your only last chance! laserpecker-4-dual-laser.kckb.st/samiluo
It's $4700 now. What was it then?
@Jake Razmataz not high at all. I got the premium bundle based on this guy's video. Pretty sure it was 1700? It was in a weird currency and I didn't do the conversion.
Fully loaded was 1800 usd plus another 80-90 usd to ship to the lower 48
Can you engrave glass bottles full of liquor with this product?
Hi Sami, RUclips won’t auto-use timestamps from the description unless you start with a 0:00 timestamp. Could you please add that? That way the time stamps will appear in the video as well :)
thank you so much for reminding! i always wonder why it doesn't show timestamps while i added lol
I have added :DD
But can I take it and let's say engrave something on wall? Or it have to be attached to base and not rotated?
They really called it the pecker? That's hilarious.
hahaha.... but yeah, they called that name
It's the 4th release! Obviously people love peckers
Don’t own an engraver yet. Seems like a good one to start. Will it engrave the metal water bottles that are coated? Like a Yeti powder coated water bottle?
Yes it will, I have the laser pecker 2 and it works great, I just finished laser engraving into a hydro flask. Making customs for the nephews and nieces 👌🏼
yes, it will have a super good result on that 😁😁
😁😁
If I had the money to buy a laser this would probably be the one, unfortunately as I was ripped off by one company a couple of years ago and will, never see what I paid for, I am reluctant to spend that kind of money ever again on KS. So unfortunately, I would rather pay the full retail price and get what I paid for than get ripped off again. It certainly looks impressive though. Have a good Valentines Day.
Mr Carve is coming out with a twin laser as well. Is mr carve or laserpecker for material engraving? Which provides a smoother finish?
Hi, thanks for asking. I happened to have the Mr Carve's new dual laser engraver as well. I'm still testing and I will compare the two, stay tuned :D
Could it cut metal. Not wood but metal
hmmm this one can't sir
@SamiLuo, on black anodized aluminum, say with about 0.002" thick anodizing, would I be able to penetrate the anodizing and get an additional 0.001"-0.002" into the underlying aluminum? This is an important legal standard for NFA engravings I wish to be able to satisfy easily at home.
I just backed one (I had the LP2). A question, the roller from the LP2, can it be used on the LP4? (for longer engravings)
Hi, yes! All LP2 accessories are supported for the LP4 :D
Good video, Best review video that laser pecker have had
Thanks
Does it do real deep engraving or just shallow surface burning?
I have problems with the fact, that established corporations soource out their costs for rnd out to kickstarter. This is not how this works, gentlemen! What's next? NVIDIA or Intel starting kickstarter campaigns for the next product?
Will it eventually have a Trolley Mode?
With the dice / keyboard how does the laser know the placement? Thanks.
Great video, defo going to get one, now Zippos and Wood can be done all at once, would it engrave on a 9ct gold ring ?
Yes! It has good result on gold 😁
Nice one Sami!
Thanks for the visit
Do I need a Spray product like "Brilliance" to get Black markings on various metals with Laser Pecker 3 or 4?
Hello, thank you for this great review. I don't find a Clear answer, do you know if we can use the new rotary extension from LP4 on a LP2? Thanks a lot for your feedback!
Yes, they are compatible, 100% sure :D
Thanks for the review. Would you say these are good for light/beginner commercial use? I have a LP1 Pro just to familiarize myself with the tech and have backed the Kickstarter for the LP4.
Yes, absolutely. The best part for the LP 4 is it comes with an intuitive App and you can basically do everything there. I've reviewed many others and they all have to connect to a computer and adjust this and that, lots of hassle
Does the shield fit onto the Laserpecker3?
Sami...can you hook up your laptop to the lazerpecker 4? I think thats what the USB connection is for yes? Please let me know we will buy 2 units if we can use a computer ( not a cell phone) to control / send images- Thanks!
what is same but less expansive? thks
Hi mate-can you tell us if it engraves on Silicone? I can seem to find the information on their website on in your video?
Amazing product! Would you happen to know if you can use this to engrave on gold foil paper?
You can :D
Can you try it on gold or silver jewelry? And gold plated silver jewelry?
😄we tried and it was great
@@SamiLuo Thank you for the quick reply! Do you know what’s the laser power? I bought Mr Carve M1 Pro with 10W power and it couldn’t engrave on my gold plated silver jewelry 😢
Is it out now? Cant find it!
when does the laserpecker 4 release? I can’t find it anywhere
It first went to crowdfunding and should be very soon available on all platforms
Hello !
What is the maximum size of the product surface which is possible to engrave ?
Awesome ❤️
thanks
@@SamiLuo you welcome sir I like your video sir ❤️
Can you put the laser machine to your skin to engrave a tattoo?
Get the LaserPecker 4 from its official Amazon page: amzn.to/3ZHHgHZ or its official site: www.laserpecker.net/products/laserpecker-4?ref=OJZFnF5YK_8fhf.
Can you please do a review on LaserPecker 3 nobody has really done it a good in-depth video on it
Thanks for commenting, I will try to find if have time :DD
Where can I buy the laser? Can you send a link that works?
Does laserpecker 3 work on metals such as chrome and nickel?
You can back the project at: laserpecker-4-dual-laser.kckb.st/samiluo
Hi Great Review - I have pledged for the full set = 4 + Rotary + slider. What is the accessory that you show at 7:19 crawling along for a big engrave - I don't see this in the list of accessories?
Thanks for asking. That's from the LaserPecker 2 :DDD They will have a new one for the LaserPecker 4 later this year :DD
Do you know if Can I buy rotary extension separately? For the pecker 2 model ?
I like product must👍👍
Hi, thanks for the video. If you want to put up a small business but you are budget restricted, what version of laser pecker can you recommend in terms of quality and efficiency of work?.. hope you will find my comment.. thanks in advance..new subscriber here..
Thanks for asking. I don't know what engraving size and what main material you want to do for your business though, if mostly for normal things like wood or leather then I would say the first Laserpecker generation is good enough :DDD
Is it a strong enough laser to engrave in hockey puck?
hmmm it's made of vulcanized rubber right? that should be tricky... but i have never tried that material, you can ask this in the official laserpecker group to see if someone happened to try that for u
No option to power with a battery this time?
Sorry I just confirmed with LaserPecker official again, seems it can't be compatible. LP4 needs 24v, while the previous power bank is only 12v
@@SamiLuo Nice! Thanks for the info. :)
@@badgerwatkins Sorry I just confirmed with LaserPecker official again, seems it can't be compatible. LP4 needs 24v, while the previous power bank is only 12v
@@SamiLuo Thank you for the update. I wonder if it would run off a 24v battery pack. Would be a nice stretch goal. :)
very very helpful! Do you happen to know if it can engrave different layers within glass or crystal? meaning, can it engrave within the middle of the crystal?
Hi, that can't be realized though...
Hello the LaserPecker 4 engraves on natural crystals like rose quartz, amethyst etc ?? Thank you
Hi, you have to paint black on those materials and then engrave, but seems the result is not that great though :((
Do you know if this will engrave part numbers in steel parts? We currently pay another shop to do this to our manufactured aluminum and tool steel parts. Please help . Looking to buy one ASAP if it can. I know you mentioned stainless steel but we’re engraving plane steel.
Thanks in advanced
Hi yes, it would be no problem at all, you can use the 1064nm laser for the plane steel :DD this is what sets it different from that 450nm, which only works for 304 stainless steel .. :DDDD
Does this works on Aluminium ?
yes😁
When will this release?
Should be very soon on their website :D
Will the LP4 detect several objects on the slide table or do you have to preadjust for every item?
Have to preadjust :D
Hello sir I'm interested in purchasing this product...
Can you please guide me ?
Hi please check out the link in the description, it's in crowdfunding stage😁
Does it work on gold?
absolutely mate
Maybe a dumb question. If I back one am I guaranteed that they are going to send me one?
LaserPecker is such a reputable brand with many successful crowdfunding projects, I'm pretty sure they will deliver to its backers
How do you manage to engrave different objects at different positions in a single step like in 09:00?
Hi we first designed all the letters and then set parameters for each based on the cube material and then previewed the printing area to make sure it would engrave properly, then the LP4 would automatically switch between 450nm and 1064nm laser to engrave at one pass. :D
@@SamiLuo Hi, thanks for answering. But the focus of my question is how you tell the LP4 to engrave at different positions. How does the LP4 know, where the different parts are positioned?
I think he meant it's done manually in the toolpath and then he lines up the cubes to the preview boxes of each letter
Hello. Hope you can help me by answering a question. When you engrave the ring inside, I noticed that you did not center the text, was this a mistake, or is it impossible to center the text do to the angle?
Hi, thanks for commenting. Actually I also noticed that, it can do perfect engraving for large sized rings, but not that good for extremely small sized ring but sorry I don't have time to test it carefully at the moment but I have forwarded your question to the official LaserPecker team, would you mind to join their official group and ask the official to test for you? Here is the group facebook.com/groups/1239220466858169
When will this be available for purchase?
Right now, it's at crowdfunding campaign stage :D laserpecker-4-dual-laser.kckb.st/samiluo
Can this engrave all metals ?
theoretically, yes! :D
Can this be used as a portable laser? Can I put it up against a wooden door for example to engrave it?
Hi, you can do that without problem :DD
Will there be a trolly mode like from the LP2?
The trolly from LP2 is not compatible with the LP4, but there will be a new trolly for LP4 later :D
Does this work on standard American home outlets?
It is plastic, right? Then yes, it would be no problem, just use that 1064nm laser :D
@@SamiLuo oh I meant can it be powered by a standard outlet 😂
Looks amazing. What is pricing, and when is it a available?
Currently it's on crowdfunding, you can check it the link in the description
@@SamiLuo u can already buy it
@@LWBMedia20 :D I got to test the prototype :D
buy from where? not their official site I don't think
@@chitung2277 Kickstarter. It is.
Where i can order to buy,I see offers for las..pecker 1,2,3 but nowhere for laser pecker 4.Any idea
It's on crowdfunding, you can back the project at: laserpecker-4-dual-laser.kckb.st/samiluo
Hi!!! Can it engrave silver 925? How deep? 😊
Yes you can! But... it's just engravings and I have no idea about the depth...
can you still use the laserpecker 4 mobile? Like holding the machine itself with your hands and pushing it onto something? (Like LP2/3)
Yep, you can ...
Is this machine better or M1 ?
Thanks for asking... Honestly if you want the best metal and plastic engraving, then I think the Mr Carve M1 is still the best portable one on the market today, but if you want an all-in-one material engraving, then go to the LaserPecker 4.
What material was the black ring the Video? Can it do Tungsten ring?
It would be perfect for Tungsten ring :D
When will it be onsale
Hi you can check it out from their crowdfunding page: laserpecker-4-dual-laser.kckb.st/samiluo
Might be kind of a dumb question for you, but if you were to get a laser engraver with the proper ventilation and enclosure for it, would I be able to leave it unattended in my garage while I work on other things inside? I would really like to get one of these but if I need to be present at all times it’s running I’m not sure it’s for me. I just can’t spend hours a day attending to it just to monitor it. Maybe I could install a smoke detector like you have? Please let me know your thoughts on this, thanks!
Hi, thanks for asking. That's actually a very good question because everyone wants to use a machine in a safe and sound way! You can leave it unattended without worry, you don't have to spend hours being aside. I showed it has several safety measures at 10:50 like when it detects shield off or tilting it will stop automatically :DD
What an irresponsible responds. You don't leave a laser unattended. Especially when you work on organics, like wood. A fire can start in a couple seconds.
Does this work on 3D printed PLA or ABS?
Definitely
hellooo, can this be used to make engraved bar necklaces?
It couldn't be better, use that 1064nm laser :DD
THANK YOUU!
Where can you purchase the necklace blocks and bracket bangles etc?
Can this thing engrave a company logo on aluminum tins?
Yes bro
@@SamiLuo how about something like a bar of soap? Could it engrave a logo on that without the soap combusting?
Sir does it cuts plywood and acrylic upto 5mm and what is the price....?
Yes bro... for the price you can check on its crowdfunding page: bit.ly/3hqg0xc
Can you post a cutting-specific review to pair with this awesome engraving-focused video?
Hi, just having problem with my laser pecker 3 with green/red light keep flashing and showing that Bluetooth in abnormal connection. Any solution for this?
Hey you can contact the officila laserpecker to see the matter :D
Can you engrave aluminium with it?
Yep
How about glass engraving?
It can, but need to paint the glass black 😁
10:22 wow
kimstar here
hah
Hi I tried to check the app in the iPhone App Store I can’t find it please let me know what app is it
How can I buy it
Hi, it's the LaserPecker App :D Sorry about the late reply, you can check it out at: laserpecker-4-dual-laser.kckb.st/samiluo
Will this engrave silver?
Yes...
@@SamiLuo Thank you so much
New to laser world, how hard to learn with no experience?
It's easy. I've got to say LaserPecker is the easiest laser engraer I've reviewed, their App is crazy good. You don't even have to connect to computer to use it, which is impossible for many other coreXY laser engravers.
@@SamiLuo your option laserpecker or xtool laser engraver for use and overall function?
Can it engrave bamboo tumblr?
Definitely
WHY CANT LASER PECKER MAKE A METAL LASER ENGRAVER/CUTTER THAT IS COMPACK AND SIZE OF LASER PECKER 1. IMAGE A FIBRE LASER THAT IS SMALL AND AFFORDABLE LIKE THE LASERPECKER 1. WHERE U CAN SHOVE IN YOUR BAG AND TRAVEL WITH. Engraving or CUTTING ON METAL ITEMS. LIKE METAL KEYCHAINS/KNIVES/PENDANT ETC.
Where I can buy it?
Hi you can check out the description laserpecker-4-dual-laser.kckb.st/samiluo, currently, it's on crowdfunding:DD
Can this mark on 10k 14k & 18k gold, real gold not the fake gold plate stuff
Yes mate, it works so well on metal stuff with its 1064nm laser :D
pelo preço que a vão comercializar nem vale a pena comprar pois ja existe no mercado iguais ao mesmo preço.