After 1 years of completing of my ccna course,today i came to know how exactly to update the ios in real. Hats off to you sir. Seriously this was not available on RUclips earlier.
Do you know rhat I could configure ospf ,dhcp ,Nat ,vlan etc on cisco router .until I ask myself can you reset ,backup or recover on cisco devices . I was shocked to know that .I can't. I have to revisit ccna .
Thanks for providing practical videos for us because as a fresher in networking job, it is really hard to do real-time work on this devices due to its cost rather than just doing practicals on packet tracer or gns3 etc.😊❤.
Here we connected the ethernet cable for TFTP server purpose right? Is it not required when we are configuring because in previous videos Ethernet cable was not connected?
Do you have any information as to how to configure TFTP server to upload SIP firmware in 7960 series phones? Have tftp64 on a windows 7 machine as well as PUtty on same machine.
Why we have connected lan cabel from pc to router? From console cable we can configure our Device. So what is need to connect Lan cable to switch interface?
Sir आपने जो IP use किया है इस video में वो आपने नेटवर्क का use किये या by default है। क्योंकि आप कही पे उस same IP को default gateway में भी use कर रहे है कही कुछ। so आपने जो IP use किया है उसको proper way बता दे कि कौन सा IP किसके लिए है।
2500 cisco router - i set config-register 0x3922 - but now i cannot access router via hyperterminal i get a (x) showing or flashing curser - nothing else anyone help ? im trying to copy ios from tftp server as cisco 2500 ios is probably corrupt
hello indian. You are learning Cisco router. I have been Update IOs inrouter Cisco1841. But sometime it show error at 98% Os: I not learning it. !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!![Timeout] TFTP : Operation teminated
After 1 years of completing of my ccna course,today i came to know how exactly to update the ios in real. Hats off to you sir. Seriously this was not available on RUclips earlier.
😊
Do you know rhat I could configure ospf ,dhcp ,Nat ,vlan etc on cisco router .until I ask myself can you reset ,backup or recover on cisco devices . I was shocked to know that .I can't. I have to revisit ccna .
same thing happened with me write now , I just completed my internship from nielit and now i am here , thanks to pm networking
your are really helping all future network engineers.. great 👍
Thanks for appreciation 😊
Thanks for providing practical videos for us because as a fresher in networking job, it is really hard to do real-time work on this devices due to its cost rather than just doing practicals on packet tracer or gns3 etc.😊❤.
Glad it was helpful! I will share soon
Hello Sir
You are doing a great job.👍👍👍
Sir, just keep giving us all the knowledge in this way.
Sure
Please upload day 4 and continue thos series
We'd be really interested to watch thks
Sure, I will continue
Thank you a lot sir. After completing my CCNA now I was able to learn how IOS of router can be installed. 😅
Happy to help
Exactly sir your videos are very useful for everyone, really this video is available on the youtube and google thank you sir you are great
Thanks for appreciation
Great explanation with good knowledge share
Thanks for appreciation 😊
GOOD HARDWORK BOSSS...
MAY GOD BLESS YOU....
Thanks 😊,
Thanks for sharing the information sir!??
My pleasure!
Great learning video, thank you so much
Thank you too
Your video is very helpful always.....❤
Glad to hear that
hi sir- can u do a video of how to monitor the networking devices and how to work/troubleshoot the slowness of the networking device.
Still no replay sir
Thank you so much sir 🎉 You have teach it in every detail.
Welcome dear 😊
Here we connected the ethernet cable for TFTP server purpose right?
Is it not required when we are configuring because in previous videos Ethernet cable was not connected?
Thank you so much PM sir... Respect 🔥
Thanks for watching
Love you dear Sir and please try to upload more videos
I will try my best
Good stuff
Thanks 😊
Really good video thank you❤❤❤
Do you have any information as to how to configure TFTP server to upload SIP firmware in 7960 series phones? Have tftp64 on a windows 7 machine as well as PUtty on same machine.
you are great ...
Thanks for appreciation 🙂
Thank you Sir. This video gonna help me. Sir would please make a VOIP configuration video with this real 2811 router for us !
Sure, but I don’t hai ePhone
thanks vijay 🙏😁
Very helpful
Thank you
Super
Thank you
Hi sir love from Hyderabad I saw your CCNA videos
sir have one think which series routers and switches can we upgrade IOS image..!
Router 2911
Switch 2960
@@PMNetworking Thank you so much sir
Thank you for this vide0. Please would you share the links to download TFTP Server and Cisco IOS Image
I don't have bro
Love it
Hi. And for c4500x-f-16, with problem in boot variable. The congreg.
Sir how to do in cisco switch if nothing is showing except switch: command only in switch
Sir I hope you will reply
Thank u so much sir
Welcome dear
great
Thanks
sir we can use winscp as well as tftp server?
Nice
Thanks
Hello sir Thank you but I am not getting well TFTP the use of it
Sir, when and how have you assigned ip address on f0/0 port of router? I didn't understand. Please elaborate...
you can configure it through LAN cable in rommon mode. you can check command in video again.
Hello Sir Would you please share the link to download Cisco IOS Images.
Any tips how to enable the interface in rommon ?
While booting, press cnt+c
Dear Sir Day 13 is not availbal in the playlist
Hello, can you provide links to download ios....and tftp
Sir, do you provide live classes or course, so please tell me i love to enroll. how to contact you??
Visit our website for live training: www.pmnetworking.in
ok sir
❤
thank you
Welcome
Why we have connected lan cabel from pc to router? From console cable we can configure our Device. So what is need to connect Lan cable to switch interface?
To configure IP address on the interface of router, this is the only way to configure ip in Rommon mode.
@@PMNetworking Suppose if we have switch is not in roman mode so do we need to add Lan cable to switch interface to configure ip?
No
how to take backup from switch to usb drive not tftp server kindly make video practically all steps
Sure
How do I delete a corrupt firmware in Rommon mode?
You gave 10.2 as gateway in Fa0/0 but you mentioned 10.1 as default gateway in rommon mode ..?? Hows that
I have to check it
@@PMNetworking plz clarify
Sir Why you have connected Ethernet cable pc to router. Would you please define it
To Configure IP Address on the FastEthernet port of Router.
Hello Sir
Sir I want to clear a doubt.
Would you please help me
Sir आपने जो IP use किया है इस video में वो आपने नेटवर्क का use किये या by default है। क्योंकि आप कही पे उस same IP को default gateway में भी use कर रहे है कही कुछ। so आपने जो IP use किया है उसको proper way बता दे कि कौन सा IP किसके लिए है।
how you deleted the flash ???? need video also on that.
Noted
Can you please share the iOS link for the Cisco 1900 series router ?
Sure, ping me WhatsApp +918511826341
Can you share the steps to how we download ios at cisco website
Sure
2500 cisco router - i set config-register 0x3922 - but now i cannot access router via hyperterminal i get a (x) showing or flashing curser - nothing else
anyone help ?
im trying to copy ios from tftp server as cisco 2500 ios is probably corrupt
How i Can résolve this problème to my Cisco router :
Error : compressed image checksum is incorrect
Will check it
hello indian.
You are learning Cisco router.
I have been Update IOs inrouter Cisco1841.
But sometime it show error at 98% Os:
I not learning it.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!![Timeout]
TFTP : Operation teminated
Make sure your router is reachable from tftp
@@PMNetworking yes it is reach in TFTPD32
How to boot switch from bootloader mode?
sir one question i lost my ios of a router 3750 how canidownlaod ios 15\
Visit official website of cisco
Aunque no hablamos el mismo idioma, entendí lo que había que hacer y funciona en cierto modo, solo que en mi caso sale un error con el archivo bin 😭
Al final si pude, este man es un genio, funciona a la perfección, se merece 1 millón de likes
Thanks for appreciation 😊
Hii i am facing problem in cisco router it shows ios image is not available in flash and error coming when i type syntax show flash
Your ios image is not correct
@@PMNetworking how can I get ios image
drive.google.com/drive/folders/16hK3M0AP4spqkB5UenP-hNLq9x6YGC9a
Can you share free link/file the ios for cisco 892fsp sir?
I m facing issue that shows there is insufficient space in flash what can I do now
First delete the old ios after backup
@@PMNetworking how can I delete that ios image sir
#delete flash and hit enter twice
But we can't able to delete that flash in romman mode sir
Can you please let me know how to same in Real?
This is real
@@PMNetworking I mean how we can do the same remotely?
Please share the link to download Cisco IOS image. Is it free or need to buy?
Free
@@PMNetworking would you mind sharing?
Sure dear
Share your mail I’d
Looks like it won’t allow me to share my email here.
sir would you share us cisco ios router 2811
Sure, share your mail id
What can I do now sir
Follow this video step by step
I already followed ur vedio and I m facing issues can I send u photo
I like ty our video and I'll like.and subscribe bro..
Thanks for supporting
Hi bro can you share TFTP server download link
Sure, please share your mail id
may i have your IOS c2811?
Sure, share your mail id
Tftp request timeout a raha please help
Fe port par 0 a raha mera
sir pls give me the ios download link
For which series router?
Any one can help me to do this on anydisck
Yes
Oky ok yg
Thank you sir!
You are welcome!
Thank you
You're welcome
thank you
You're welcome