Triple Turbo Billet Duramax Super Stock "Cummins Killer" warms up at The Pullers Championship 2023
HTML-код
- Опубликовано: 7 сен 2024
- the legendary "Cummins Killer" billet duramax triple turbo super stock warming up at The Pullers Championship 2023 #duramax #truckpull #diesel
Those are some mighty big turbos
Enough to pick up animals and small children
@@eliakers4580 for sure 🤣🤣
bigger than the one on my semi truck
nah my 335 got bigger lol
Now this is a Proper Daily Driver :)
These Super Stock 4WD truckshave got to be 4000 hp plus and rev to 7500. Absolutely incredible! Billet block & heads on most of these combinations?
I could fall asleep to that, it’s so soothing, visually too
This should be a 8 hour continuous loop soundtrack👍🏻😁
Reminds me of my 4 cylinder. Got a locomotive 4 in my dune buggy. Takes 35 min usually. The pistons are 9.535in so it takes little while to get warm.
Now if I see it in Tomah this year, I need to sit down and figure out how this compound turbo setup works. I read a story about when this engine was built they had to go backwards with technology and use an inline pump because a common rail system wouldn't work. If that's true or not I would like to find out.. kind of on the same line as Farmtruck and Azn's hearse with the purpose built Wagler engine. Don't know if you can tell I'm obsessed with Duramax all around.!
Truck has 3 turbos. Top 2 feed into the bottom. Yes, it has mechanical injection from a 17mm wimer injection pump.
I don’t think you can really call it a duramax anymore
Extremely brilliant design, fab and air flow engineering 🏁👌
I needed this to start my weekend!!😛🥵
Every day is a fun day in my world lol 😂 💪🥳🇺🇸🇺🇸🇺🇸💪🥳🇺🇸🇺🇸🇺🇸💪💪💪🇺🇸🇺🇸🇺🇸💪💪💪🥳
If you listen closely you will hear what you think is the engine idling it is actually the computer saying gallon, gallon gallon ,gallon really fast
Idk but looks like that transmission and tires are gonna take a serious beating.
Damn them turbos are as big as my Prius motor...
Thats a Beautiful Engine & sounds excellent
Thats a work of art
Even though I'm Cummings fan. It's not good for the sport to have one brand win all the time....one of my favorite pulling trucks was a dmax driven by Tim Jackson a while back
Thing of beauty ❤
I bet that CP4 to CP3 change is a lot easier on that than what I’m dealing with today.😩
Lmao 🤣🤣 CP4 🦤💨💩
This truck is absolutely awesome love everything about it!!!!🤙🤙🤙
Cop: how much hp does your car has?
Me : YES
That ain't gonna fit in your supra....
Pull ar Langford, NY! 1st weekend of August
Greens: SaVe ThE EnViRoNmEnT
Me:
Bro boutta get the biggest runaway of his live
They have air shut offs (a flap/ slide in the intake kinda like a old detriot) last thing you want is 4k hp with no throttle or off switch.
You can see the air shut off's on the front of the turbos (the big billet chunck of aluminum)
WOW SWEET 😊
I'd drive this for daily commutes anyday
Absolutely Gorgeous
GM can’t be beat
Can u get me a GM and ill beat it?
What transmission you guys run it clearly can hold power what ever it is should be factory for hotshot trucks 😂
It's a drop box reverser setup. They have 1 gear for forward and reverse
It looks like you got some power
you would think with such a beautiful machine they would have thought about how not to eat the smoke
The truck body is tiltes up. When they put it down. It has a hood stack
Heartwarming
Wowzers! 👍😎👍
I’m not a fan of the duramax engine but that’s a damn nice set up
Can't see the engine😂😂😂😂😂😂
Love it🤘🏻🤘🏻🤘🏻🤘🏻🤘🏻
I think that was running at a staggering 50rpm.. Check the upper pulley it was barely turning!
Cool
Probably won't take on the top Cummins pullers but it does look ready for business
I think there's an engine under all that stuff ,I can hear it. 😂
It is still based on the Duramax block design. Are any of the pulling engines actually what they are representing? All pro stocks run a Deere design block made out of billet aluminum. No stock block can handle the HP those engines make. Even Cummins engines aren't actually Cummins engines with all the changes made to run high horsepower, but it's still considered a Cummins based on design. Same thing with Powerstroke, Ford/ International design but not even close to stock.
Nice
Vaya par de turbos
Badass
I’d like to see it in action
You like what you like but ive seen more cummins run there bumpers into the end berm than duramax’s
Exactly 100%
Of course you have. More of them in the sport. Aftermarket for the Duramax hasn't been around as long. Powerstroke too. Nothing stays on the top forever
That’s why they named it Cummins killer 😂, no one’s worried about killing a duramax or power stroke
@@countcuda70 Nothing but Cummins. They will always be on top in the Pulling Circuit
@@braxtondraughon6669 That's a dumb comment. They have been around a lot longer with more aftermarket support. Duramax is coming around though.
😂😂😂😂That’s awesome!
How do the turbos not suck in a ton of dirt being right next to a spinning tire??
I love this Prius. I love the melon shooters
What kind of axles/driveshafts do they run on these?
It's a Rockwell rear with a built factory front axle. Truck Master had the chassis builder on his channel a little while back
Thing rolls coal from idling, damn
Listen to that big cam..... Dude that's the the turbos spooling... What?..... Yeah... I'm. Gonna load up and go..need a hand?... HURRY UP MF I NEXT!!
Cams don't make a diesel lope. That's from timing and fuel. Diesels don't have vacuum like a gas car does
At Cummins will eat your lunch 😮😮😮
Охуеть не встать вот это агрегат❤❤❤❤
Those those turbos look like Jet engines lol. Sounds mean and hungry to eat 😆
Those are big water cooling system
Where are the comments saying the black smoke looses power?
I still prefer the triple v12 Allison or the quint blown chev tractors.
Why dont we see this truck at diesel truck pulls?
So that’s a direct drive set up, right? Or is it more of a centrifugal style drive?
Drop box, reverser setup. 1 speed forward, 1 backwards
Greta loving this 😂😂
What’s need when you line up with a Cummins
That also has the same things done to it
sound like a RX-7 rotary engine
All that for 300 feet!
Send it
ALICE TO THE MOON
can I borrow this on this weekend?
How much gas does it take to drive that thing?
Cummins Killer 😂😂😂😂
I know right...that name shouldn't even exist...def aint no cummins killer
it will kill your cummins i know that
@@bigfluppus5461 🤣 and you know this howww?
😍
Is that using a SIGMA inline pump ?
Is that a supercharger under the turbos??
No, it has a mechanical fuel pump
This is cool
How many pounds of boost?
Thats not a turbo thats a whole wheel
How much gas it consume
None, its a diesel lol
Still hard to believ it makes 3300 hp and 4000 lb-ft of torque.
“Duramax”
It's what it's called. Wagler DX460 Duramax
how do pullers all keep their hot sides from rusting?
must be a new truck??
@@rkzooplays Polished stainless. Don't see to many miles. It's newer. Think version 3 was 2019 or 2020
@@countcuda70 I think he’s talking about the hot side of the turbo
@@rkzooplays Yep. They don't see a bunch of run time. I'm sure for show purposes they polish them
"is this safe for the enviroment?"
Totally bad ass and kill the Cummins
Takes all that to beat cummins
@@Askyourmother424 You act like the Cummins isn't just as built lol! They have big mechanical pumps and triple turbos too 😂
@@countcuda70 minus close to liter of displacement 🌈
@@Askyourmother424 You're a 🤡. You think a Super Stock Cummins is stock 5.9L displacement lol! You have no idea. You're just a know nothing Cummins fan boy. Move along kid
@@countcuda70not to mention billet aluminum blocks that cost 60,000$. They’re not even Cummins engines at this point. They’re custom made engines based off of a Cummins design.
Wonder what that engine cost?
I’m curious just how much money this guy has put into that weapon
Most of these trucks are 250k+
Euro 5?
I eh counted 4 turbos😂
There's only 3. Where are you seeing the 4th?
Shoulda just put 4...
Que motor é esse? ?
Qwantoz hp? ?
Wagler Duramax, around 3000 HP
Might as well just put a train motor in it...
*air filter has left the chat*
96 psi
brapa banyak waktu terbuang,,,aku butuh makan
Ahh... Diesel smoke, good for the lungs.
yes sir
Uhhh no fire wall 😅
what am I looking at?!
That’s one big asian engine
Huh? Hows it asian? Its a billet block from Wagler Diesel Performance in Indiana. Even a factory Duramax isnt asian. Its made in Ohio.
@@countcuda70 isuzu helped create the duramax with GM.
@@lukerobison7053 Not sure how that makes it asian. It's built in Ohio and 100% owned by GM. Even the foundry is in Ohio. Case helped Cummins with the 5.9. AVL an Austrian company helped Ford to design the 6.7L It's not referred to as a Case engine. The Powerstroke isn't Austrian either. You selected bits and pieces of information. Yes, Isuzu and GM partnered together to create the Duramax. They were never made in Japan though. Every Duramax has been assembled in Ohio and Dmax LTD. This was about the Wagler Performance Duramax. Not a factory one anyways.
@@countcuda70 I agree I was just mentioning they helped develop it. Which was probably what he was talking about when he said it’s a Asian engine.
@@lukerobison7053 Okay. I was referring to the Wagler Performance engine in the video. That's not a stock production Duramax. It's a billet block DX460 Duramax from Wagler Performance
How dare you
Con razón se está acabando la capa de ozono jajaja
It's not
The horsepower might be 2,099
Makes over 3200hp
اختنق السواق
I don't like engines that don't run smoothly, it feels weird
All the Super Stock trucks run like this
Y does it look like V4
Its a V8 Duramax Diesel
How much hp's does this car has ???
3200+
@@countcuda70 wow,it's brutal 🔥🔥🔥💪🏿💪🏿
It's creating toooo much polution