Thank you so much, I fitted a new handle on my merc today. Your video helped a great deal. I haven’t got a dremel so just used a sharp chisel to remove the plastic rivets. I purchased a box of fixing clips of various sizes just incase some broke and there was actually one missing! Took me about 3 hours as I had no idea what I was doing until I watched your video. Thanks once again from your English buddies across the pond in London 🇬🇧👊🏼
One of the best tutorials on any task. Loved the detailed pointers, clarity, and high quality optics! Watched your video twice before starting and only took me an hour and a half and $30 instead of the $1800 MB wanted to fix their shoddy product. Thank you so much!!!!
Great video. Just literally finished the job and couldn't of done it without you. Amateur/rookie at best so took me about 2.5hrs with most of the proper tools. Didn't have a small grinder had to use a 4inch disc but it works once you go slow and steady, Delighted.
Really good video that goes through the entire process to avoid any possible first time gotchas and hiccups. Well done as I was able to do this on my own C250 in less than 3 hours - taking my time to not break anything. The most difficult part was grinding the black taps as Dremel was just melting the plastic rather than cutting it off. Used a wood drill bit and just grinded it out till it broke free.
Thank you for this video.... i watched it and paused and played as i was doin mine....this video saved my ass!! Saved time and didnt break anything.... im used to the american classic stuff....thank you very much!!
Very well explained I give you A+ I need to do it on my c350 you are a master pro I ll drink a modelo on your name while doing the job 👍🏼🙏🏼great video thanks
I have done an ignition switch 8 months pregnant on a jeep, pulled a transmission from a suburban, replaced my mass fuel sensor, rewires my cut out Benz headlights and stereo, fixed my DSL (driver steering locking mechanism that my locksmith accidentally pulled programming my new key, all of these by myself but doing my door handle on my Benz was the worst job I’ve ever done I wanted to lose my mind it was awful. Watch videos people
I have a 2012 e350. Same issue happened. Is there a link you can post for purchasing the part or part number? The MB dealership says I need to replace the panel at $4000!
Wow... That's insane. Here is the link: www.ebay.com/itm/334929318646?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=d9gqop_ETOO&sssrc=2047675&ssuid=&widget_ver=artemis&media=COPY
Kapı döşemesini söküp içten açma kolulunu degiştirmesi sadece 10 dk ama siz çok mesafeli ugraş vemişsiniz kısaca döşemenin orjinalligi gitti tirim sesi yapar içten açma kolunun altınta ufak bir delik açacaksın içten açma kolunu keseceksin pimi aşagıga dogru iteceksin kolu tak deliktenden pimi iteceksin delik olan yeride mastikle kapat iş biter
Thank you so much, I fitted a new handle on my merc today. Your video helped a great deal. I haven’t got a dremel so just used a sharp chisel to remove the plastic rivets. I purchased a box of fixing clips of various sizes just incase some broke and there was actually one missing! Took me about 3 hours as I had no idea what I was doing until I watched your video. Thanks once again from your English buddies across the pond in London 🇬🇧👊🏼
Awesome! Good for you. I’m glad this was helpful.
I did this job for a client and i dont know how much to charge him and great video btw very helpful
Charge by the hr. I’d say it can take you anywhere from 2-3 hours. It’s a Mercedes so charge accordingly.
One of the best tutorials on any task. Loved the detailed pointers, clarity, and high quality optics!
Watched your video twice before starting and only took me an hour and a half and $30 instead of the $1800 MB wanted to fix their shoddy product.
Thank you so much!!!!
Wtf why would they charge u $1800 dlls just to replace a damn handle
WOW, THank you. I need to get back to making these kinds of videos
Great video. Just literally finished the job and couldn't of done it without you. Amateur/rookie at best so took me about 2.5hrs with most of the proper tools. Didn't have a small grinder had to use a 4inch disc but it works once you go slow and steady, Delighted.
Thank you so much. Excellent video. Very helpful.
Thank you
Really good video that goes through the entire process to avoid any possible first time gotchas and hiccups. Well done as I was able to do this on my own C250 in less than 3 hours - taking my time to not break anything. The most difficult part was grinding the black taps as Dremel was just melting the plastic rather than cutting it off. Used a wood drill bit and just grinded it out till it broke free.
Just fixed my driver side door handle I appreciate the video saved me $1,800
Awesome! Thanks for the comment. I’ll keep making videos
Thank you for this video.... i watched it and paused and played as i was doin mine....this video saved my ass!! Saved time and didnt break anything.... im used to the american classic stuff....thank you very much!!
Awesome! THank you
Gracias a este tutorial pude arreglar la puerta de mi Mercedes 😎🎉
Este video está grandiosos no entiendo mucho el inglés y gracias a ti lo pude hacer muchas gracia
Me da gusto. Debo empezar hacer videos en español.
Thanks man u made me waste no money
very detailed tutorial. loved it thank you
Awesome
Very well explained I give you A+ I need to do it on my c350 you are a master pro I ll drink a modelo on your name while doing the job 👍🏼🙏🏼great video thanks
Thank you
I have done an ignition switch 8 months pregnant on a jeep, pulled a transmission from a suburban, replaced my mass fuel sensor, rewires my cut out Benz headlights and stereo, fixed my DSL (driver steering locking mechanism that my locksmith accidentally pulled programming my new key, all of these by myself but doing my door handle on my Benz was the worst job I’ve ever done I wanted to lose my mind it was awful. Watch videos people
Impressive!
فك فرش خلفي 300c AMG
Precise information.
Very specific bravo good t you
thank you
Great video!
thank you
I have a 2012 e350. Same issue happened. Is there a link you can post for purchasing the part or part number? The MB dealership says I need to replace the panel at $4000!
Wow... That's insane. Here is the link:
www.ebay.com/itm/334929318646?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=d9gqop_ETOO&sssrc=2047675&ssuid=&widget_ver=artemis&media=COPY
Hello. Can you tell me pls what kind/size of screws you used to place the panel back after cutting those plastic couplers?
@@krgm11 Those screws will come in the kit you you purchase with the handle.
Man that part at 5:15 is so hard
Super merci
thank you
Kapı döşemesini söküp içten açma kolulunu degiştirmesi sadece 10 dk ama siz çok mesafeli ugraş vemişsiniz kısaca döşemenin orjinalligi gitti tirim sesi yapar içten açma kolunun altınta ufak bir delik açacaksın içten açma kolunu keseceksin pimi aşagıga dogru iteceksin kolu tak deliktenden pimi iteceksin delik olan yeride mastikle kapat iş biter
Seems to be a common issue with the damn German Benz
Yes.
Were are u located do you know anyone in California that can do this ? Whats the average cost?
My handle snapped too like the one u did on my 2010 benz c350
have you fixed it?