@@Borzy93 just dropped every single link to interior and exterior parts of my RS , was feeling nice today! The links are in the description of the mod list video and also my pov walk around full video! In the descriptions you will find all links! So sick!
dang my mudflap set came today and trying to get any of them on was a painnnnn. For the rear, I was able to remove the plastic liner but trying to align the top expanch was so tough and ended up falling through the hole when I had already put all the clips back in 💀💀. Then I thought the front would be easy but I have no idea why Subaru decided to make the screws rubber cause every single one managed to strip.
I agree with you brotha !!!its extremely difficult for something they should’ve been made so simple, wish I could’ve helped more mane! Seriously took me awhile to figure out both but once I got it I understood , funny is I also dropped a clip in between my liners and drove on a six hour road trip there and back 12 hours and then when I got back took off my lining again and suprisingly found it!!! It was a miracle, ended up getting em to work that day!
do you have a video on how to mount the rear mudflaps? I'm looking at the instructions and it says something about "expansion anchors" though I'm uncertain on how to install them from the pictures in the instructions.
Brother!! I feel that, I didn’t video the rear because I got them on very easily , I’ll explain, it’s easier then the front becuase once I realized the expansion anchors are what you basically use to get the screws all in, otherwise the screws won’t screw, that’s where the expansion anchors come in to place, you use them as an anchor to hold down the screws, the confusing part for me at first was not realizing it doesn’t make sense until I started doing it, cus you screw the mudflap from one side with the metal bracket behind the flap(metal bracket keeps it flat and in place and holds the flap straight and sturdy) the anchor would be hiding behind the holes , so you gotta pop out the few clips that are holding it together and replace them with the expansion anchors and tighten down one screw to an expansion anchor once you got the mudflap and everything all lined up, (use Manual to see which flaps and brackets go where) . Goodluck brother lmk if you got anymore questions, once you pop out the clips and start doing it you will see what I mean :)
@@ImpreziveRS24 thanks for the detailed reply! I think I get the gist of how to install them now. I also wanted to ask if you installed with or without the rear tire on. I feel like there’s enough space to work with the tire on, but wanted to ask to get your input
@@subrutal keep the tires on, not worth it to take it off, probably new car too it’s dialed already, i kept mine in and it was no problem, I also have a little screw driver n stuff but I remember actually fitting my drill and lightly drilled them in super gently though, careful to strip em, no extra anchors, and my pleasure brother , posting a full walk around vid rn actually ! Check it out when ya can it mean a lot!
@AyyyGabagool of course brotha!! Have a great day mane! Its the nameless executive quad tip axleback exhaust with a five inch muffler I got it in neochrome too😁
BRUH I just installed these and the rear ones were so much harder than the fronts in my opinion. The instructions were basically useless and most of the steps were unnecessary. Eventually figured out you only need to remove 3 clips on each side to pull the lining out enough to get the expanding anchor clips in. I had to tape them in so they would stay put when I screwed into them. It took me like 2 hours before I finally figured out how to do it.
@@ImpreziveRS24 ahhh haha my channels not really for my car. Maybe! My nameless exhaust is currently bein g built, no idea how long it will take to arrive, but I look forward to installing it!
@AyyyGabagool that’s awesome , the thing said it was being built for me too, but happened to get it within a week along with an email saying they got a shipment in right when I ordered , hopefully that’s the case too for you🤙🏼goodluck brotha
Very helpful thank you !
Gotchu homie ! Glad to hear it
@@Borzy93 just dropped every single link to interior and exterior parts of my RS , was feeling nice today! The links are in the description of the mod list video and also my pov walk around full video! In the descriptions you will find all links! So sick!
dang my mudflap set came today and trying to get any of them on was a painnnnn. For the rear, I was able to remove the plastic liner but trying to align the top expanch was so tough and ended up falling through the hole when I had already put all the clips back in 💀💀. Then I thought the front would be easy but I have no idea why Subaru decided to make the screws rubber cause every single one managed to strip.
I agree with you brotha !!!its extremely difficult for something they should’ve been made so simple, wish I could’ve helped more mane! Seriously took me awhile to figure out both but once I got it I understood , funny is I also dropped a clip in between my liners and drove on a six hour road trip there and back 12 hours and then when I got back took off my lining again and suprisingly found it!!! It was a miracle, ended up getting em to work that day!
do you have a video on how to mount the rear mudflaps? I'm looking at the instructions and it says something about "expansion anchors" though I'm uncertain on how to install them from the pictures in the instructions.
Brother!! I feel that, I didn’t video the rear because I got them on very easily , I’ll explain, it’s easier then the front becuase once I realized the expansion anchors are what you basically use to get the screws all in, otherwise the screws won’t screw, that’s where the expansion anchors come in to place, you use them as an anchor to hold down the screws, the confusing part for me at first was not realizing it doesn’t make sense until I started doing it, cus you screw the mudflap from one side with the metal bracket behind the flap(metal bracket keeps it flat and in place and holds the flap straight and sturdy) the anchor would be hiding behind the holes , so you gotta pop out the few clips that are holding it together and replace them with the expansion anchors and tighten down one screw to an expansion anchor once you got the mudflap and everything all lined up, (use Manual to see which flaps and brackets go where) . Goodluck brother lmk if you got anymore questions, once you pop out the clips and start doing it you will see what I mean :)
@@ImpreziveRS24 thanks for the detailed reply! I think I get the gist of how to install them now. I also wanted to ask if you installed with or without the rear tire on. I feel like there’s enough space to work with the tire on, but wanted to ask to get your input
@@subrutal keep the tires on, not worth it to take it off, probably new car too it’s dialed already, i kept mine in and it was no problem, I also have a little screw driver n stuff but I remember actually fitting my drill and lightly drilled them in super gently though, careful to strip em, no extra anchors, and my pleasure brother , posting a full walk around vid rn actually ! Check it out when ya can it mean a lot!
@@ImpreziveRS24 sounds good ill keep a eye out for it
@@subrutal thanks breh! Yeah this cars so new that there’s not much vids n stuff out there so trynna grow the rs community here
Thanks for the vid! What exhaust do you have on there?
My pleasure ! I got some vids of the exhaust setup on my channel 🤙🏼
@@ImpreziveRS24 Oh word. i'll take a look. thanks
@AyyyGabagool of course brotha!! Have a great day mane! Its the nameless executive quad tip axleback exhaust with a five inch muffler I got it in neochrome too😁
@@ImpreziveRS24 Just took a look at exhaust and I'm probably gonna end up getting one! The installation looks dead simple compared to what I expected.
@AyyyGabagool yeah brotha super simple!
BRUH I just installed these and the rear ones were so much harder than the fronts in my opinion. The instructions were basically useless and most of the steps were unnecessary. Eventually figured out you only need to remove 3 clips on each side to pull the lining out enough to get the expanding anchor clips in. I had to tape them in so they would stay put when I screwed into them. It took me like 2 hours before I finally figured out how to do it.
It was a pain in the butt for me too brotha I’m glad u figure it out eventually, wish I could’ve helped more!
@@ImpreziveRS24 all good! Referenced ur vid for the front and those went smoothly
@AyyyGabagool awesome !! Those took me forever but once I got them I got them!! Have a great day brotha post ur car soon!
@@ImpreziveRS24 ahhh haha my channels not really for my car. Maybe!
My nameless exhaust is currently bein g built, no idea how long it will take to arrive, but I look forward to installing it!
@AyyyGabagool that’s awesome , the thing said it was being built for me too, but happened to get it within a week along with an email saying they got a shipment in right when I ordered , hopefully that’s the case too for you🤙🏼goodluck brotha