Thanks for the assembly video. Great detail on getting the bolt in place. Bonus feature! Now I know what those two holes are for at the base of the grip.
Finally got a KSG and didnt pay 3x MSRP. Thanks for the video I was having a hard time trying to figure out how it went back together together, your video made it much easier. Now that I have done it I understand how to do it, but I was ablut to loose it for a min
Your video saved my life. I just got a KSG 25, I followed the instructions and took it apart. Super simple, cleaned it and went to put it back together....oh my god, putting that bolt back in correctly took me hours. Most of the videos online dont really show the "line" that has to be in the groove for it to go back together. Everyone focuses on the 90 degree turn and magically it reassembles. I struggled to get the bolt to stay in while putting the butt stock back in place.
It appeared from the video that the internal parts looked fairly durable. Fairly simple at least for the first layer take down. The whole package was small enough that you were able to get it all on video.. which is one of major features of this design. Still would like to see someone shoot a round of skeet with one these though.
Thank you! The bolt and taking the buttstock of the shotgun off was my problem. It acquires more force even with be oiled up. But, runs like a champ! The lining of the teeth is where I had the most difficult time at. I had figure that one out with my gigantic hands. Haha!
I'm brand new at shotguns -- and made a dog's breakfast of disassembling and reassembling the gun for the first time. Your video is the fifth one I've watched -- and the first one that clearly explains and shows what's involved in getting the firing pin properly installed. "Thank You" is insufficient for responding to your video!!
I dont mind a reasonable amount of thumbs down but when they intentionally come over just to thumb it down screw that or YOU TUBE should show who thumbs down a video and thumbs up a video and im sure it would be more honest of a rating,
This is a field strip, not a disassembly video. Disassembly would include removing the magazine tube springs, followers, barrel nut, safety, trigger, hammer, etc.
PETE, the next video in the series should be the ksg vs a regular pump shotgun shooting 15 rounds side by side see which one is faster. get one of the other guys working at the range to run the other gun and you can run the ksg. This will shut up all the troll haters.
yeah there hitting the thumbs down every time i do a KSG video if they have something to say there gonna have to write it in front of everybody instead of trolling with the ratings button
I wish mine were as easy to disassemble. Mine is very tight to remove the trigger section. I find I must pull the action back to remove the trigger unit. Even then it is still a little tight.
hey pete, I thought the shirt order was going to be on for a while the store now says new orders are closed, are you planning on doing anymore anytime soon?
Kel-Tec's offering is the best of the bullpups. Though i'm not a fan of Bullpup designs in general, if I was working in tight spaces, i'd have one for sure ! Also you get a much higher rounds count over other modified / shortened shotgun platforms. I'd get one today if it were semi-auto ^.^
I am having trouble with my KSG. rounds won't come out of the mag tube. They are hanging on the cartridge catch no matter how hard I rack it. The shells never drop on to the lifter. They extract just fine. Do you know any Gunsmiths in the Philly area that are familiar with the KSG that could fix this problem? The other issue is this is a used gun. Keltec doesn't honor the warranty for a 2nd owner even though the manufacture date is March 2016.
Just got the ksg and it does not like snap caps at all. It double loads and hangs up left and right... Many ppl have sent theirs back thinking something is wrong but it isnt... Its the caps
Thanks for the assembly video. Great detail on getting the bolt in place.
Bonus feature! Now I know what those two holes are for at the base of the grip.
hey, you really helped me put it back together again.This gun really needs a slide grip up front to eliminate the chance of any weak stroke.
why do people thumb down your KSG vids you're good at showing it off! i bet they're jealous they don't have one!
Finally got a KSG and didnt pay 3x MSRP. Thanks for the video I was having a hard time trying to figure out how it went back together together, your video made it much easier. Now that I have done it I understand how to do it, but I was ablut to loose it for a min
Your video saved my life. I just got a KSG 25, I followed the instructions and took it apart. Super simple, cleaned it and went to put it back together....oh my god, putting that bolt back in correctly took me hours. Most of the videos online dont really show the "line" that has to be in the groove for it to go back together. Everyone focuses on the 90 degree turn and magically it reassembles. I struggled to get the bolt to stay in while putting the butt stock back in place.
I can't even do it no matter how many times I try
I just purchased one of these today, glad to see such a well detailed video on disassembly for cleaning
ahh you can do it, its good that you learn too. we'd lov to see you do disassemble videos that be great
Appreciate your time and ease of instructions. I feel confident now.
Thanks.
Great video….easier to reinstall bolt if you turn the gun right side up. Thanks for the great tutorial.
thanks buddy your videos on the Ksg is what convinced to to buy it
It would have been nice, if Kel-Tec had said how to reassemble the bolt carrier. Thanks.
Thank you, finally got my KSG back together!!
It appeared from the video that the internal parts looked fairly durable. Fairly simple at least for the first layer take down. The whole package was small enough that you were able to get it all on video.. which is one of major features of this design. Still would like to see someone shoot a round of skeet with one these though.
Thank you! The bolt and taking the buttstock of the shotgun off was my problem. It acquires more force even with be oiled up. But, runs like a champ! The lining of the teeth is where I had the most difficult time at. I had figure that one out with my gigantic hands. Haha!
The ksg is a sweet shotgun,seems pretty easy to take down.Great video Pete.
the shell ejection amazes me! cool vid buddy
thanks for showing the slide release buttons workings.thats nice and simple
thanks im not there biggest fan ether but they did great with this design
I'm brand new at shotguns -- and made a dog's breakfast of disassembling and reassembling the gun for the first time. Your video is the fifth one I've watched -- and the first one that clearly explains and shows what's involved in getting the firing pin properly installed.
"Thank You" is insufficient for responding to your video!!
thanks Paul you should get one some day
Put another hundred rounds through mine today, still running strong. Glad yours is dude.
Great video Pete this will be helpful for me if i can ever find a KSG
Good training! Ready for Level 2 Disassembly/Assembly!!
Nice vid Pete. Though I'm not a fan of keltec I can appreciate you showing this on your channel. Keep em comin big guy.
I dont mind a reasonable amount of thumbs down but when they intentionally come over just to thumb it down screw that or YOU TUBE should show who thumbs down a video and thumbs up a video and im sure it would be more honest of a rating,
the m4? no but there used for different reasons my house is small thats why i like the KSG so much
its a very durable gun look up the torture tests
Thanks! For the life of me I couldn’t figure out how to put my bolt back in. You helped a great deal.
Nice job Pete. As for me Mike does all the cleaning around here :)
This is a field strip, not a disassembly video. Disassembly would include removing the magazine tube springs, followers, barrel nut, safety, trigger, hammer, etc.
Wow , very simple ... that's an awesome shotgun !
I was having a hard time getting the bolt back in. Thanks
Looked like it was gonna be a pain in the cannoli, but very easy looking disassemble.
were gonna do it again for the people who missed out keep and eye out for the video
That shotgun is crazy badass lol I love it!
Interesting vid Pete! Thumbs up!!
PETE, the next video in the series should be the ksg vs a regular pump shotgun shooting 15 rounds side by side see which one is faster. get one of the other guys working at the range to run the other gun and you can run the ksg. This will shut up all the troll haters.
great close up/dissembly vid!!
anytime these are may favs
I've put about 500 rounds through my KSG absolutely love the shotgun.
Very cool and easy..Thanks again Pete for helping me with my Ruger on Sunday..I'll keep ya informed of the progress.
thanks bro, and thanks for everything man
Thanks for the great video Pete.
np buddy thanks for watchin
The twist and lift up step would cause me to get the hammer out :)
it be cool if they made a semi
sure any movement will help break it in
This channel has saved me countless headaches. Much obliged! :D
thank you
yeah there hitting the thumbs down every time i do a KSG video if they have something to say there gonna have to write it in front of everybody instead of trolling with the ratings button
My FN P-12 and my Kel Tec KSG are my two Shot Guns of Choice. My KSG would be my favorite carry gun, if it were a carry gun. Darn, no gun is perfect.
cant wait
Thanks
That bcg is a challenge sometimes
thanks buddy
I wish mine were as easy to disassemble. Mine is very tight to remove the trigger section. I find I must pull the action back to remove the trigger unit. Even then it is still a little tight.
hope you get one
Excellent, easy to follow. Thank you.
Thanks！Really help！
Nice vid Pete.
thanks bro
Nice and simple. Thank you sir!
i know the feeling man
Thank you, this a very informative video. I just got a Gen 2 KSG
hammer bar i think keeping me from getting the grip all the way on..
Video was very helpful, thank you!
mine too
It takes down easier than I thought it would! I would like to get my hands on one. What oil are you using?
hey pete, I thought the shirt order was going to be on for a while the store now says new orders are closed, are you planning on doing anymore anytime soon?
Pete, do you like this as much or more than your Benelli?
Kel-Tec's offering is the best of the bullpups.
Though i'm not a fan of Bullpup designs in general,
if I was working in tight spaces, i'd have one for sure !
Also you get a much higher rounds count over
other modified / shortened shotgun platforms.
I'd get one today if it were semi-auto ^.^
Nice vid, thanks for posting it.
Million dollar question if you had rounds in the chamber how would you take them out
Great vid Bro-- it's hockey time!
LOL your magic with the hammer
I love this channel
There is a new selector switch for The KSG on RUclips called the FTSS, check it out.
big help, thanks
yeah man
Thank you
Great video. Helped me out a ton. Much appreciated...
What's the best plastic cleaner?
there tough to find right now
For the life of me, I can't get that stock to go back on. I've followed all the videos I can find and it will just not go in.
Great trick to put the bolt back in, Thanks
thanks T
LOL they just try to piss me off and it works!!! so i will not give them the satisfaction they can stick that thumbs down UP THERE ASS! LOL
How many rounds does this have?
I am having trouble with my KSG. rounds won't come out of the mag tube. They are hanging on the cartridge catch no matter how hard I rack it. The shells never drop on to the lifter. They extract just fine. Do you know any Gunsmiths in the Philly area that are familiar with the KSG that could fix this problem?
The other issue is this is a used gun. Keltec doesn't honor the warranty for a 2nd owner even though the manufacture date is March 2016.
Pete do you think "dry raking" it with snap caps would help smooth it out just like firing?
THANKS
Just got the ksg and it does not like snap caps at all. It double loads and hangs up left and right... Many ppl have sent theirs back thinking something is wrong but it isnt... Its the caps
Guess who just got a double feed with snap caps cause they wanted to make sure it cycles.
M PRO 7or Balistol
Great video even 10 years later
ekim did you find out if that's normal
i cant get thae back off hitting it as hard as posible plz help
Ratings disabled???
Does anyone have any tips on taking the KSG- 25 apart. Its mostly the same but something about the unscrewing the tubes with the quarters is different
Good vid Pete. You should name your ksg ". Troll slayer!"
I bought my ksg new and noticed I can rack it back without pushing on the release. Is that normal??
Safety off you can
This is exactly the same as the KS7 for those looking for a vid!
Take it apart or don't. Don't half step and tell us your going to do something 4 months later.