MERCH ► sammit.net FOLLOW ME ► @sammit01 The S13 is proving harder than expected to get simple upgrades done. Trying to install a 2 way LSD has completely backfired & caused a lot of problems.
Don’t get frustrated now man. Like tommy said, you learned a lot , and you’ll never do it wrong again. It’s all just a learning experience. Some day your gonna use the knowledge and remember where and how you learned and it’s gonna make you laugh.
Differing differentials will always be difficult but at least in the future he will be able to differentiate between the two and diffuse a situation he might have been diffident in.
@@jamiestrong7993 all in order to rub it in your face the next day lmao but seriously he's a good guy but his finger is to far in the back. But lzmfg is rotating his
So many people give him shit for being "mean" to the usual suspects, but this is a perfect example of how he can be helpful when he's dealing with someone that isn't a braindead chucklefuck. Well, Sammit has his issues but he has some competency & knowledge.
@@cd5sircoupe I don't know why he gets stick for giving people shxt, they usually deserve it imo and it makes for good content..I think it's different because Sammit has alot of skills and knowledge so that's probably why he got advice and had a civil conversation..
@@skinnyvinny2070 Hope you're not lumping me into that... I know exactly how Tom is because I'm the same way. Bust balls with the homies, and I'll definitely shit on someone if they're pulling some dumbass shit.
The pinions are all interchangeable between abs and non abs, the thick shims and collars are all different so mark everything from whatever diff they are from and then swap all the shit until it fits.... I've just done this for a 4.6
I dont know if im the only one, but I actually enjoy these types of videos. A good video doesnt need to have something insane happening every time. Watching this content makes your videos feel more real and relatable in my opinion. Keep on posting whatever you can film, thats what vlogs are for :)
I second that. All the cool stuff and successes is great, but so is the reality of set backs and learning experiences. We all go through them and it’s very down to earth to show them.
Ruddy is just too lazy to learn. He’s Smart don’t get me wrong but the only thing that’s wrong with him is he rushes his builds. He doesn’t have the patience to take his time on things. Been watching the dude for years now since haggard and he’s still the same. at lest he’s slowly changing.
You CAN run the non-abs diff with an abs driveshaft if you are desperate.... the diff is only ~0.75-1 inch shorter, so your slip yoke won't sit in as far but its perfectly drivable
Love seeing Tommy being the dad trying to make Sam look at the bright side. Sam found out more about S13 diffs in the three hours trying to make Jimmy's diff work.
considering im going through the same thing as you in terms of car headaches I understand your issues and appreciate how much effort you are still putting into the daily vids, it cant go unnoticed
Seeing the struggles of building a car is also very valuable to your viewers because this stuff doesn't always go to plan. So it's good to see you work through challenges, that way other people know that they can as well. Hell. I've been writing on the same car for 3 years now because I have rain into so many challenges, especially with finding parts. Keep up the great work.
these 'real' videos are where the content really is. Its good too see how everything isn't curated and filtered and bubblegum and unicorns. Builds are hard, builds on a timeline are harder. You just learned a lot, and shared your learnings with your entire viewship.
Double clip Sam. bolts 🤣🤣 tommy and ruddy distracting you. When you go to a deli get a bacon egg and cheese or sausage egg and cheese on roll with salt pepper ketchup. For lunch get a California. Chicken cutlet lettuce tomato mayo American cheese avocado. Pickled Jalapeño optional toasted on a wedge. Thank Me later
It's alright things will get better not only did you learn something about diffs but you documented it for all of us and everyone else who ever has the same thoughts or questions these daily vlogs show a lot more of who you are and we can all relate because we've all been there one way or another.
as someone who works on modified cars for a living, i know this frustration way too well. the s13 is sick, and i cant wait to see it finished, but im glad you at least have a plan b car for the lz event.
Sorry it didn't work out for you brotha. I used to HATE Tommy Fyeah but over time seeing him get involved and have his homes back he's becoming one of favorite human beings. Loving the support within this group of friends.
Dam when Tommy said you have data and you’ll never let this happen again, that hit different. Yeah the situation sucked but you have so much to take from it. And now you are one step closer to okachans knowledge. It all comes from experience brother! I know the situation is resolved now but awesome vid. Don’t say this vid wasn’t a banger. It had me on the edge of my seat!
Not only did you learn valuable information for yourself but because of what you do for a living your helping out so many people that maybe thinking about spending money on that kind of swap, keep pushing your doing great.
That's a bit out of the way considering all of the others in Wally. Shame that Gigante's deli closed last year since they were right around the corner from the shop, but I hear Gigante's Too/Cousin's deli are good.
Sam just made a lesson video and now everyone has learned something. Also Tom to Chris, " Your a fucking idiot!" Tom to Sam, " Hey man it's good. You learned something and won't forget it.", " Hey Sam I think I can help you out?" That cracked my up.
Ditto to what Kyle said. I’m glad you uploaded this video as is. So what the parts didn’t work? Yeah, it’s frustrating, however, that’s usually what happens to many of us when working on our projects. But, shit happens bro. Keep your head up and keep grinding. You’ll get‘er done! You’ll see!
it happens bro i swapped my engine and it’s so close but just still can’t figure it out and it’s been like 6 months SO frustrating man so i know how u feel don’t worry bro it’ll all work out in the end stay positive!!!
I feel you dude I’m trying to Manual Swap my E36 and shit keeps breaking as I’m taking it off cause it’s Old and previous owners did Quick Fixes Instead of proper shit, on days like that day a break and come back later with a clear mind and then again you learn shit from failures
also you need to know the contact patch u need to paint it and spin it and see if it matches and uses shims to move it around and get it right there are a lot of measurements
I bet the bolts stretched a bit being lower tensile Made that mistake when i did my brake upgrade an they had normal 8.8 bolts i used allen bolt instead as they are 12.5
Sam I don't know if it's obvious to anyone else here but you need to move to Connecticut , such a good vibe going on at the workshop since you've arrived
based on previous vid, sam had this car only if his coming to the state so he just jumping to the car. so he can't deliver his YF S15 from one to another country cause covid issue.
Don’t let it get to you Sam. It takes real car guy and gals to understand how situations turn to poo 💩. That’s just the part of the car game. Just keep pumping videos out mate I’m sure all your subs are car people like you Bc I understand how this stuff turns to pop with the quickness
Don't stress my guy! It's a lesson learned... Chin up bro! Possible solution, I know you don't run welded diffs, what about installing a minispool, as a temporary fix, you won't have to outlay for tailshaft, axle hubs, any other odds or ends. Until you get your hands on a proper LSD Respect to Papa Tom 👏👏👏🏆
Sorry if this is a dumb question but wouldn’t you be able to get a diff from a infinity Q45 and bolt it in, it has a factory LSD I think the housings are the same but don’t quote me on that. Also I meant to say a junkyard/salvage yard should have one, additionally if the case is different would the internals fit
Sammit like Tommy said you can’t be discouraged because you have the knowledge now that things don’t work but however when you do a ring and pinion swap they have to stay together you can’t just do a rain gear because the mesh are not the same🤔😊👍🏽🤙🏽
if the 5bolt R200 is a 3.90, pretty sure it came from an Infinity J30(Y30 code) , if it was not imported. That was a popular OEM swap in like 2005-10. You get the LSD, stronger outputs and straight bolt in . the R200 Z32 is a 4.08 lsd. which was also a popular swap, but you needed the J30 halfshafts, since the Z32 ones where also 10 mm longer. OR just swap in an non ABS driveshaft. oh looks like that is the direction you are going. drive shaft would be the cheapest option.
I didn't read all the comments if anyone already cleared this, but. You shoul never mix pinion and crown wheel, even it has same tooth count, they dont usually match very well. I use always those as a pair. Reason for different size of crown wheel bolts is s14 facelift. 7/96 or so forward s14 has 14mm bolts on crown wheel. s13 and pre facelift s14 has smaller bolts. It has nothing to do with or without ABS.
Lesson here: Before you buy a car, or after if it’s not possible before, throw it on a lift and get under it. I think Sam knows all this just got super excited which I can’t blame him for. 🔥🔥🤬
this video gave me anxiety i did not have. i have a stock 180sx with abs diff. and i bought a R32 diff without ABS and both diffs are currently at a shop to swap over all internals from the R32 diff to the s13 diff, both are R200 thought. i realy hope everything goes well :(
#15, Burger King Foot Lettuce. The last thing you want on your Burger King burger is some else’s foot fungus. But as it turns out that might be what you get.
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
Don’t get frustrated now man. Like tommy said, you learned a lot , and you’ll never do it wrong again. It’s all just a learning experience. Some day your gonna use the knowledge and remember where and how you learned and it’s gonna make you laugh.
Differing differentials will always be difficult but at least in the future he will be able to differentiate between the two and diffuse a situation he might have been diffident in.
Can’t pay for knowledge like that , theirs only one real way to figure it out
Tommy is low key a “look at the bright side of things” type of guy.
And then sells them something for top dolla
He cares. He’s a put ya on the carpet when your blacked out on the hardwood floor kinda guy
@@jamiestrong7993 all in order to rub it in your face the next day lmao but seriously he's a good guy but his finger is to far in the back. But lzmfg is rotating his
On the bright side sammit can buy a v6 mustang to drift on friday
@@himynameisbrianw He's already got the "yeehaw" part of the equation down.
I’m sure Tommy is like this with all his good friends, but WE rarely see it. It’s good to see this side of him too. Life is all about balance.
well yeah when people are not building junk he is actually nice xD
Look at papa Tom giving Sammit fatherly advice..it's really different considering he's usually giving people shxt 🤣🤣 gold content bro 💪
So many people give him shit for being "mean" to the usual suspects, but this is a perfect example of how he can be helpful when he's dealing with someone that isn't a braindead chucklefuck. Well, Sammit has his issues but he has some competency & knowledge.
@@cd5sircoupe I don't know why he gets stick for giving people shxt, they usually deserve it imo and it makes for good content..I think it's different because Sammit has alot of skills and knowledge so that's probably why he got advice and had a civil conversation..
He like Sam and he's from
Japan. connections an they have a good friendship.
@@skinnyvinny2070 Hope you're not lumping me into that... I know exactly how Tom is because I'm the same way. Bust balls with the homies, and I'll definitely shit on someone if they're pulling some dumbass shit.
tom is hard on his friends but you could tell he cares and just fuxks with them for fun
Tommy's the kind of homie that comes in full clutch for his homies when they really need something and that I can respect
Always treated crown wheels and pinions as matched sets. Especially secondhand as the wear patterns would be different.
Diffs are a black art.
And if you swap them you need new crushes to do it properly every single time you install them to get the right distance.
@@wobblysauce ^ that too, although we use machined collars from GTRs in ours.
Diffs are part of the dark arts like Theo Von would say lol.
I like how in Japan he has Okachan and in the states he has Tommy😂
Smart people surround themselves with smart people
Word!
Great point. And Adam even though he’s younger.
The pinions are all interchangeable between abs and non abs, the thick shims and collars are all different so mark everything from whatever diff they are from and then swap all the shit until it fits.... I've just done this for a 4.6
Correct 👍
Dude I love the tech talk on these diffs. Don't worry so much Sam, the raw footage was still good stuff.
I dont know if im the only one, but I actually enjoy these types of videos. A good video doesnt need to have something insane happening every time. Watching this content makes your videos feel more real and relatable in my opinion. Keep on posting whatever you can film, thats what vlogs are for :)
I second that. All the cool stuff and successes is great, but so is the reality of set backs and learning experiences. We all go through them and it’s very down to earth to show them.
Tbh 99% of Sam's videos are great. Wether its like this, a drift event, or even just a car meet. Doesn't matter. Still great
I wish rudnik could understand Tommy's points and reasoning just like Sam does because then Rudnik could actually get somewhere with his builds
Ruddy is just too lazy to learn. He’s Smart don’t get me wrong but the only thing that’s wrong with him is he rushes his builds. He doesn’t have the patience to take his time on things. Been watching the dude for years now since haggard and he’s still the same. at lest he’s slowly changing.
SAM its a LEARNING experience for each of us that follow you. DONT FEEL BAD ever for sharing your faults...
You CAN run the non-abs diff with an abs driveshaft if you are desperate.... the diff is only ~0.75-1 inch shorter, so your slip yoke won't sit in as far but its perfectly drivable
Love seeing Tommy being the dad trying to make Sam look at the bright side. Sam found out more about S13 diffs in the three hours trying to make Jimmy's diff work.
considering im going through the same thing as you in terms of car headaches I understand your issues and appreciate how much effort you are still putting into the daily vids, it cant go unnoticed
Seeing the struggles of building a car is also very valuable to your viewers because this stuff doesn't always go to plan. So it's good to see you work through challenges, that way other people know that they can as well. Hell. I've been writing on the same car for 3 years now because I have rain into so many challenges, especially with finding parts. Keep up the great work.
these 'real' videos are where the content really is. Its good too see how everything isn't curated and filtered and bubblegum and unicorns. Builds are hard, builds on a timeline are harder. You just learned a lot, and shared your learnings with your entire viewship.
Double clip Sam. bolts 🤣🤣 tommy and ruddy distracting you. When you go to a deli get a bacon egg and cheese or sausage egg and cheese on roll with salt pepper ketchup. For lunch get a California. Chicken cutlet lettuce tomato mayo American cheese avocado. Pickled Jalapeño optional toasted on a wedge. Thank Me later
Tommy is a fucking plug ... This Dude Has Ever Part Everyone Wants ... Big Shout out to tom
It's alright things will get better not only did you learn something about diffs but you documented it for all of us and everyone else who ever has the same thoughts or questions these daily vlogs show a lot more of who you are and we can all relate because we've all been there one way or another.
It's actually cool to see content like this where you and another person like Tommy bump heads and kick ideas around.
I really like tommy hes such a cool guy
as someone who works on modified cars for a living, i know this frustration way too well. the s13 is sick, and i cant wait to see it finished, but im glad you at least have a plan b car for the lz event.
The ring gear and pinion gear are a matching pair and are "lapped" together so they mesh perfectly. You can't just swap ring gears etc.
Sorry it didn't work out for you brotha. I used to HATE Tommy Fyeah but over time seeing him get involved and have his homes back he's becoming one of favorite human beings. Loving the support within this group of friends.
Love the double diff pull late night edits lol 🤣🤣🔥🔥
Honestly went back to see if i accidentally clicked on the slider lol.
Excited to see the S13 finished!
Sam at 550-6min mark you have a repeating clip!! But still stoked to see you getting that hardware store shit out of there
Yep
He just wanted make sure we knew what was going on.
@@therealboofighter I watched it 4 times so I'm very aware now that the diffs out 🤣🤣
@@AverageJoeBuilds some people are slow learners. Lol.
@@therealboofighter I point in the mirror and say the same thing every day lol
Dam when Tommy said you have data and you’ll never let this happen again, that hit different. Yeah the situation sucked but you have so much to take from it. And now you are one step closer to okachans knowledge. It all comes from experience brother! I know the situation is resolved now but awesome vid. Don’t say this vid wasn’t a banger. It had me on the edge of my seat!
poppa tom so different with out strapnick around so calm
Don't worry bro I'm sure you'll get it sorted you learnt something new and taught other people something new thanks for your hard work and content
I think this is the best video it’s why I like RUclips it’s behind the scenes it’s informative it’s real life problems and all my favorite videos
If these 30 year old cars were easy to work on, what fun is that!? Lovin Vlogmas Sam, keep your head up. We're all cheerin for ya.
at 06:18 i have finally mastered the art of Déjà vu! Thanks for the daily uploads man! love this CT content for sure!
respect your hard work and for tom to be chilling with you and trying to help out
Not only did you learn valuable information for yourself but because of what you do for a living your helping out so many people that maybe thinking about spending money on that kind of swap, keep pushing your doing great.
Video unavailable on my RUclips? Is there a problem going on with the video?! Wth sammit! Hahaha i want my daily content 💪🏻🤟
Sammit showing the CT deli love! Next time you're down near Jimmy's shop go to Lino's Market in Durham
That's a bit out of the way considering all of the others in Wally. Shame that Gigante's deli closed last year since they were right around the corner from the shop, but I hear Gigante's Too/Cousin's deli are good.
I'd be going over that whole car an checking bolts after finding the rear lose like that.
Shit like this makes me so thankful my OS had zero problems going into my diff.
yoooooo love the vids have been watching your channel for a long time and cant wait to see what your gonna do with the new car!!!!!
Tommy with the positivity
Sucks when things like this happen, but great the have the group of friends you do that are so willing to help! Best of luck
Cant wait to see what the future holds for the S13 (240SX) Contiuning to love vlogmas this year.
Sam just made a lesson video and now everyone has learned something.
Also Tom to Chris, " Your a fucking idiot!"
Tom to Sam, " Hey man it's good. You learned something and won't forget it.", " Hey Sam I think I can help you out?" That cracked my up.
Good teaching Tom, it’s nice to watch Tom talking about mechanical stuff on a serious note
Ditto to what Kyle said. I’m glad you uploaded this video as is. So what the parts didn’t work?
Yeah, it’s frustrating, however, that’s usually what happens to many of us when working on our projects. But, shit happens bro.
Keep your head up and keep grinding. You’ll get‘er done! You’ll see!
Finally a video showing what it is really like to play around with cars. Keep your head up and I know you guys will get it sorted.
Hope the s13 problems get situated this was a tough one for sure
it happens bro i swapped my engine and it’s so close but just still can’t figure it out and it’s been like 6 months SO frustrating man so i know how u feel don’t worry bro it’ll all work out in the end stay positive!!!
Will and Sammit is the best duo that came out of sammit being in the states lol so wholesome
Ring and pinion gears are a match set gotta change them together
*Double clip Sam*
Your in the JDM space. You always ask poppa Tommy what he's got. Coz he's got everything and a lil more.
Deli shop that I miss the most on the North East when I lived in Rhode Island was D'Angelo's and drinking some Del's Lemonade.
I feel you dude I’m trying to Manual Swap my E36 and shit keeps breaking as I’m taking it off cause it’s Old and previous owners did Quick Fixes Instead of proper shit, on days like that day a break and come back later with a clear mind and then again you learn shit from failures
also you need to know the contact patch u need to paint it and spin it and see if it matches and uses shims to move it around and get it right there are a lot of measurements
Love to fly out and hang with you lot. Keep killing it on the vids bud 👍🏼
Ayeee I was starting to think we had to wait until tomorrow! Thanks for more awesome content! Any sammit video is a banger video
I bet the bolts stretched a bit being lower tensile
Made that mistake when i did my brake upgrade an they had normal 8.8 bolts i used allen bolt instead as they are 12.5
The whole cars finger tight. Hoist it up tighten everything. And I mean everything 😂😂
Tommy's shop is just basically UP-Garage CT😂
Sam I don't know if it's obvious to anyone else here but you need to move to Connecticut , such a good vibe going on at the workshop since you've arrived
Well, I learned heaps of valuable technical info about Nissan diffs, thanks and heads up 100% you will get it sorted
What about the pink Yashio Factory S15 at the LZ compound?
based on previous vid, sam had this car only if his coming to the state so he just jumping to the car.
so he can't deliver his YF S15 from one to another country cause covid issue.
@@CrispyHands I’m talking about the Yashio pink S15 that was in the beginning of Adams video today.
yeepp that's interesting, maybe a rep of yashio s15 that adam makes?
Great try and learning what fits and what does not. 👍💯 saving a lot of time for other people
I’m loving the mechanic type of videos
Don’t let it get to you Sam. It takes real car guy and gals to understand how situations turn to poo 💩. That’s just the part of the car game. Just keep pumping videos out mate I’m sure all your subs are car people like you Bc I understand how this stuff turns to pop with the quickness
Basically this is how every video goes for me LOL Keep it Real!
Me too buddy ...lol. I think I got the LSD he needs though will see if he hits me back I got 2 JDM S13 diffs in the garage though..
Don't stress my guy!
It's a lesson learned... Chin up bro!
Possible solution, I know you don't run welded diffs, what about installing a minispool, as a temporary fix, you won't have to outlay for tailshaft, axle hubs, any other odds or ends. Until you get your hands on a proper LSD
Respect to Papa Tom 👏👏👏🏆
Also the driveshaft bolts thread are coarse thread which is stronger than the UNC thread bolts
I would just weld the shite out of it. Source what you need later and that would get you drifting in your own car.
Pinion and Gear are always changed together. also if you needs parts i might have im in philly area PA
Sorry if this is a dumb question but wouldn’t you be able to get a diff from a infinity Q45 and bolt it in, it has a factory LSD I think the housings are the same but don’t quote me on that. Also I meant to say a junkyard/salvage yard should have one, additionally if the case is different would the internals fit
Back wit another banger sammit 🤟
Sammit like Tommy said you can’t be discouraged because you have the knowledge now that things don’t work but however when you do a ring and pinion swap they have to stay together you can’t just do a rain gear because the mesh are not the same🤔😊👍🏽🤙🏽
if the 5bolt R200 is a 3.90, pretty sure it came from an Infinity J30(Y30 code) , if it was not imported. That was a popular OEM swap in like 2005-10. You get the LSD, stronger outputs and straight bolt in . the R200 Z32 is a 4.08 lsd. which was also a popular swap, but you needed the J30 halfshafts, since the Z32 ones where also 10 mm longer.
OR just swap in an non ABS driveshaft. oh looks like that is the direction you are going. drive shaft would be the cheapest option.
I didn't read all the comments if anyone already cleared this, but. You shoul never mix pinion and crown wheel, even it has same tooth count, they dont usually match very well. I use always those as a pair. Reason for different size of crown wheel bolts is s14 facelift. 7/96 or so forward s14 has 14mm bolts on crown wheel. s13 and pre facelift s14 has smaller bolts. It has nothing to do with or without ABS.
Everyone talking about Tommy this vid really shows why Okuchan is Sam's angel
Rudnik is rubbing off on ya bro! Same clip twice at the 6 minute ish mark hehe... love the vide, keep it up!
Lesson here: Before you buy a car, or after if it’s not possible before, throw it on a lift and get under it. I think Sam knows all this just got super excited which I can’t blame him for. 🔥🔥🤬
I hope Tommy takes a few editing tips from Sam, just up the production quality and pops off, the guy's a well on 90's jdm knowledge
Am i the only one that wasnt able to watch video on phone and only on t.v?
Shout the fuck out to Tommy! Keeping things positive and reminding you that there is always something to take away from a shitty situation 🤘
try local parts stores for J30 5 bolt axles
this video gave me anxiety i did not have. i have a stock 180sx with abs diff. and i bought a R32 diff without ABS and both diffs are currently at a shop to swap over all internals from the R32 diff to the s13 diff, both are R200 thought. i realy hope everything goes well :(
Why is it sayin the video is unavailable on this device????
Tommy makes the channel 10x better
Tommy is nice to sammit bc Sam is intelligent. He talks to ruddy the way he can understand 😆
Them being about the same age has alot to do with it and Sam isn't a disaster in the making when it comes to cars..lol
Papa Tom is 100% the nicest guy in the JDM space !!!
Even got the Adam Liz double clip in. Nice 👍
#15, Burger King Foot Lettuce. The last thing you want on your Burger King burger is some else’s foot fungus. But as it turns out that might be what you get.
Was a good video. Get to see more technical things than just a thousand foot overview of a swap.
Just a heads up you have over lap in your video when you pull the diff out
One of your best blogs yet. Real life.
Good words from poppa Tom! You learned a lot from what you did and that’s a good thing to think about
10k away from half a million bro!!
Ring gear and pinion are always a match set!
Upgarage America. Solved!
A learning video is some of the best content