Siemens Unigraphics NX- Electrical Routing/Wiring and Harness || Qualify Fitting Port
HTML-код
- Опубликовано: 20 авг 2024
- Hello Friends.
My mail id: techdesignsantosh@gmail.com
Website : techdesignsant...
Lets discuss on fitting port
Back and front extension
Join Membership Community : / @techdesignsantosh
Link to my channel : / techdesignsantosh
Check my all playlist here : / @techdesignsantosh
~~~~Please subscribe to my channel~~~~
In my channel i will give you information about mechanical Engineering software & tools
#Unigraphics tutorial #techdesign #Siemens NX online tutorial
My Contact Id: techdesignsantosh@gmail.com
Hello Sir, Thanks for making educational content.
To my knowledge, there is a specific purpose/difference btw Connector,Fitting Port and Connector,Multi Port and I believe you have those incorrectly described here....
For example, with the connecotr in the video the Fittin Port should be the side of the connector to be aligned/mated in assembly with corresponding connector type (i.e. PlugIN direction), when qualifying the Fitting Port it its highly recommended to assign and the vector orientation, so that later in assembly NX will have the mated male/female connector properly aligned during "Part Insert".
The cable/wire side of the connector should be assigned as a Connector, Multi Port and used later for the PAth/Wire origin.
Cheers.
Watching my previous video on types of ports and basics on electrical routings will clear the same.
hey i need to contact you can you please help me sharing your contact details
Is this connector available in the library?
Yes available in my library.. not in NX default library
Good afternoon! Unfortunately, i to face such a problem: I created ports for "test connectors", added details to the navigator, created a connection, created a spline from port to port. But when I try to create a layer for the bundle, I get an error: the route is not correct and there are no source ports.
I think the application does not see my connectors as electrical components.
Hi
Please share the model you have done to support@techdesign.tech i will have a look and help
Thanks
@@TechDesignsantosh I will try to make it when I get access to my PC