No they are not done when you remove them! You simply place the whole knife in very hot water not boiling for 3 minutes and then remove the scales, this allows the plastic at the rivitts to be flexible and then you can reuse them again with a really good fit, as if they were done by victorinox themselves.
That little bit of plastic you found was because you needed to heat the scales a little bit so there wouldn't be any damage. That's if you were planning to put the same scales back on...
Wow! I thought that I'm crazy about SAK(I have one with me all the time), but to go out and buy a bunch of them - even on the cheap from e-bay - take my hat off to you.
Great video man, you inspired me to change the normal scales of my Victorinox Huntsman for the plus ones and It was definitely a change for the better. Keep it up =]
Use a piece of leather to protect the knife. Fit/offer both scales, wrap in the leather and clamp (carefully) in a vice. This will provide even pressure to both scales and "should" leave no gaps. It works for me.
This was SUPER informative! Thanks a lot! I use the Victorinox oil, myself. It's thick, and sticks well, and should last a good long time. P.S., I kinda got hooked on the yellow scales from your previous video featuring a yellow knife. Thought it laughable at first, but I really like it now.
Glad to help out. :) I'm feeling the same way about the yellow. I got white/black/green/blue scales to try too. I'm curious to see if I end up liking the other colors as much as the yellow.
To remove scuffs in the plastic use a bit of white toothpaste and rub to a fine polish with a soft cloth. Practice on some similar plastic before you attempt it on your knife scales.
Pro tip, try using a dab of Loctite blue. It allows it to snap on with less friction and holds on strongly but not strong enough that you can't remove it.
I think I need something to provide more protection to the scales. I've seen people using small bench vices to do it. Saw one guy just use his hands. He must have strong hands. I would say hands is the perfect option if you can do it. I'm going to try something stiffer next time as a buffer. Maybe thin wood/plastic.
Do you mean the metal portion? If that's what you're talking about, no. You have to remove the pins (actually drill them out or cut them off I think, never done it myself) and take the knife apart and then replace the pins and reassemble. I know people do this for making custom Swiss Army Knives, but it isn't really practical to fix a knife. Cheaper to replace unless you just want to do it yourself for the heck of it (or can do it easily in your home shop).
@@robpeters2296 Very possibly. I'd check on their web page. If you go under support, you can send them a question about if they will repair something. There's also a place you can attach a pic of the knife so they could tell you for sure. They are usually very good about repairs or replacement.
Thank you. :) The issue with the mallet is you need pressure on both sides of the knife to press in the scales. The micro fiber towel is an excellent idea. I wonder if I wrap the knife with that if the pliers I have will work and not scuff the scales? I think I'll give that a shot with the next scales I put on.
NEVER DO THIS. 2 things that you shouldn't do: 1. pry the scales off your knife 2. submerge your knife in any water. you damage the old scales and you invite rusting the pins and places you can't dry on your knife. instead do this: warm the knife by covering the top with a towel and then blowing the top of it with a hair drier on low setting for 30 to 45 seconds. this heats up the plastic enough to soften it so that you do not damage the scales when you pop them off. to clean the knife you get comes CLP or an oil that cleans while it lubricates and use a small brush or q-tip to get all areas you can reach. then use a spray REM oil to get where you could not with the brush/q-tip. blow it dry with canned air and let it sit on a paper towel for 8 to 12 hours.
Значит, инструкции Викторинокс, где сказано о промывке ножа, сушке и смазке, неправильные? И что будет ржаветь в этих ножах? Латунь? Нержавеющая сталь?
Shrink wrap plastic makes a great anti scuff surface. That nasty hard poly pak we all hate to remove from tools! Lol
No they are not done when you remove them! You simply place the whole knife in very hot water not boiling for 3 minutes and then remove the scales, this allows the plastic at the rivitts to be flexible and then you can reuse them again with a really good fit, as if they were done by victorinox themselves.
Hot water to getumoff easypeazy without damage to scales. Maybe a touch -one drop of glue in each rivet hole to replace used scales?
That little bit of plastic you found was because you needed to heat the scales a little bit so there wouldn't be any damage. That's if you were planning to put the same scales back on...
Wow! I thought that I'm crazy about SAK(I have one with me all the time), but to go out and buy a bunch of them - even on the cheap from e-bay - take my hat off to you.
I used the same Swiss army knife for 15 years now I'm on my new one. Won't be needing a new one anytime soon!
Great video man, you inspired me to change the normal scales of my Victorinox Huntsman for the plus ones and It was definitely a change for the better. Keep it up =]
Thank you. :)
I just bought a victornox climber,needs new scales, where on ebay did you buy your scales from and how much.
Use a piece of leather to protect the knife. Fit/offer both scales, wrap in the leather and clamp (carefully) in a vice. This will provide even pressure to both scales and "should" leave no gaps. It works for me.
This is the best tip ever! I've changed a few scales before but this makes it much easier.
This was SUPER informative! Thanks a lot!
I use the Victorinox oil, myself. It's thick, and sticks well, and should last a good long time.
P.S., I kinda got hooked on the yellow scales from your previous video featuring a yellow knife. Thought it laughable at first, but I really like it now.
Glad to help out. :) I'm feeling the same way about the yellow. I got white/black/green/blue scales to try too. I'm curious to see if I end up liking the other colors as much as the yellow.
To remove scuffs in the plastic use a bit of white toothpaste and rub to a fine polish with a soft cloth. Practice on some similar plastic before you attempt it on your knife scales.
Onde você comprou este alicate com nylon nas mandíbulas?
Pro tip, try using a dab of Loctite blue. It allows it to snap on with less friction and holds on strongly but not strong enough that you can't remove it.
Thanks for the advice. I'll give it a shot.
I ordered a plus kit off of Etsy for $15. I’m going to use a c clamp and a some soft wood to install the scales.
Should be a nice choice. Mind letting me know how you like it when you get it done?
Maybe the vice would have been a better choice?
I know you had quite a few of these you were doing. Did you ever find a better way to put them on without scuffing them up?
I think I need something to provide more protection to the scales. I've seen people using small bench vices to do it. Saw one guy just use his hands. He must have strong hands. I would say hands is the perfect option if you can do it. I'm going to try something stiffer next time as a buffer. Maybe thin wood/plastic.
How about a microfiber cloth?
At 7:50 couldn't you just pop it in the dishwasher?
is it possible to replace the outer spine? the one on my huntsman is damaged
Do you mean the metal portion? If that's what you're talking about, no. You have to remove the pins (actually drill them out or cut them off I think, never done it myself) and take the knife apart and then replace the pins and reassemble. I know people do this for making custom Swiss Army Knives, but it isn't really practical to fix a knife. Cheaper to replace unless you just want to do it yourself for the heck of it (or can do it easily in your home shop).
@@WhiteGloveReviews yeah the metal portion, good point, would victorinox cover it
@@robpeters2296 Very possibly. I'd check on their web page. If you go under support, you can send them a question about if they will repair something. There's also a place you can attach a pic of the knife so they could tell you for sure. They are usually very good about repairs or replacement.
Nice 👍
But i use hammer for the scales
I like the yellow scales. Good video. How about a rubber mallet with it wrapped in micro fiber towel?!
Thank you. :) The issue with the mallet is you need pressure on both sides of the knife to press in the scales. The micro fiber towel is an excellent idea. I wonder if I wrap the knife with that if the pliers I have will work and not scuff the scales? I think I'll give that a shot with the next scales I put on.
Good idea and good job
Thanks. :)
yellow scales look great
I agree. I'm surprised how much I like the yellow.
Can you tell me where to find new scales in the US? Seems like every place I find them is in Europe or Russia
All the one's I've picked up have come from overseas. I haven't found any in the US either.
@@WhiteGloveReviews ok thanks, I just don’t want to get ripped off lol
Dude!
Stay on topic!
You Meander all over the place at Every opportunity!
Hi there any way I can buy one from you thanks for letting us see this good video thank you
You are very welcome. :) Are you looking for one of the $3 knives I used or for the scales. I can help point you to either one if you want.
Use a vise with tape over the jaws and you will have no marks. Do you want to sell a bag of those warn Victorinox knives?
NEVER DO THIS.
2 things that you shouldn't do:
1. pry the scales off your knife
2. submerge your knife in any water.
you damage the old scales and you invite rusting the pins and places you can't dry on your knife.
instead do this:
warm the knife by covering the top with a towel and then blowing the top of it with a hair drier on low setting for 30 to 45 seconds. this heats up the plastic enough to soften it so that you do not damage the scales when you pop them off.
to clean the knife you get comes CLP or an oil that cleans while it lubricates and use a small brush or q-tip to get all areas you can reach. then use a spray REM oil to get where you could not with the brush/q-tip. blow it dry with canned air and let it sit on a paper towel for 8 to 12 hours.
Значит, инструкции Викторинокс, где сказано о промывке ножа, сушке и смазке, неправильные? И что будет ржаветь в этих ножах? Латунь? Нержавеющая сталь?
Talk toooooooo much but thanks for the info
yes plz the £3 pounds victorinox
I don't have any for sale. If you check on ebay, you can usually find some very good deals on Swiss Army Knives. Sorry I can't be of more assistance.
Lame