I'm like you, yes I'm "That Guy" with all the amps I need and still looking for more and speakers to. My wife told me Don't buy anymore stuff. You know what though if I see a good deal I'm getting it. I don't give stuff away but damn near do. I just bought 2 18" subs in their ported boxes. All flat black constructed with 1" thick wood 33"W x 44"D x 21"H very heavy I'm guessing 200lbs per box with new woofers. Hooked them up to a pair of Crown xls2500 amps bridged @ full volume 18hz they didn't bottom out. Anyway I got them at a local auction for $42.00 that's right 42 bucks for the pair they came out of a IMAX theater that just updated their system. I'm waiting for the Mid and Tweeter Panels to come up I'll will swoop those up to. No where to put them but the garage for now. We're looking to move and these will be in a theater room in a basement. This stuff is professionally built, still can't believe it. I'm sure a setup like this is probably $8k per channel . 𝗬𝗼𝘂 𝗸𝗻𝗼𝘄 𝘄𝗵𝗮𝘁 𝗺𝘆 𝘄𝗶𝗳𝗲 𝗮𝗶𝗻'𝘁 𝘃𝗲𝗿𝘆 𝗵𝗮𝗽𝗽𝘆 𝘄𝗶𝘁𝗵 𝗺𝗲 𝗿𝗶𝗴𝗵𝘁 𝗻𝗼𝘄.
I understand your addiction to audio 100% man lol, 42 bucks geez that's beyond a steal the wood alone cost more than that AWESOME FIND but if they don't fit in your basement I'll give you 100 bucks for them lol. Tell wifey at least your not building a project car sitting in the driveway #ThemoneyPit hobby. Thanks for watching and please share the knowledge help keep soundsystem culture alive. 👍🏾
Which shopping site can I get one of those for a reasonable price to purchase on ....I have one of the 1200s I need a 2400 or 3600 🙏😪... best amplifiers ever built ...I really do need one tho
The crown macro tech 3600vz has a 30amp plug not the regular 15amp wall outlet plug so that wouldn't work unless you get a 15amp adapter to convert the 30amp plug first off. To answer your question no it won't cause a fire but the breaker would most likely flip on what ever outlet your using. The 3600vz idles at watts just to give you an idea of the amount of electricity it needs. Thanks
crown rate them amps Min power guarantee. those are tanks, I had used a Power Base 1,2 K2 Itech 6000 Macrotech I 9000 they never fail even the Power base 1,2 below ther rated load they never therm out,
The manual says it handles both 110 volts ac and 220 volts ac but is there any particular reason why it would get damaged if it was plugged into a dryer outlet.
There is different versions 110v or 220v versions if you have a 220v version i would still use the proper distro before just plugging into a dryer outlet for added protection.
Yes indeed they draw lots of power from a regular outlet, wouldn't work well without a distro unless your gonna plug them into different outlets. Thanks for watching
Hey, yes inukes 12000 have been proven to be heavy hitters for the price and wattage you can't go run. There' not tanks like the macro tech so you have to treat them with care and they will get the job done. Bottom line they put out some serious power at least 85 percent of power rating your getting. Thanks again for watching.
Respect 🙏 nice unboxing
I appreciate that. Thanks for watching 👍🏾
@@Djshaw1kinglegend 💯🙏
I use to have one of those but i sold it few years ago along with a macro tech 2400, they are very reliable amplifiers, i use it on low-mid or bass.
Yeah 2400 is a beast i ran into 3 in philadelphia
I'm like you, yes I'm "That Guy" with all the amps I need and still looking for more and speakers to. My wife told me Don't buy anymore stuff. You know what though if I see a good deal I'm getting it. I don't give stuff away but damn near do. I just bought 2 18" subs in their ported boxes. All flat black constructed with 1" thick wood 33"W x 44"D x 21"H very heavy I'm guessing 200lbs per box with new woofers. Hooked them up to a pair of Crown xls2500 amps bridged @ full volume 18hz they didn't bottom out. Anyway I got them at a local auction for $42.00 that's right 42 bucks for the pair they came out of a IMAX theater that just updated their system. I'm waiting for the Mid and Tweeter Panels to come up I'll will swoop those up to. No where to put them but the garage for now. We're looking to move and these will be in a theater room in a basement. This stuff is professionally built, still can't believe it. I'm sure a setup like this is probably $8k per channel . 𝗬𝗼𝘂 𝗸𝗻𝗼𝘄 𝘄𝗵𝗮𝘁 𝗺𝘆 𝘄𝗶𝗳𝗲 𝗮𝗶𝗻'𝘁 𝘃𝗲𝗿𝘆 𝗵𝗮𝗽𝗽𝘆 𝘄𝗶𝘁𝗵 𝗺𝗲 𝗿𝗶𝗴𝗵𝘁 𝗻𝗼𝘄.
I understand your addiction to audio 100% man lol, 42 bucks geez that's beyond a steal the wood alone cost more than that AWESOME FIND but if they don't fit in your basement I'll give you 100 bucks for them lol. Tell wifey at least your not building a project car sitting in the driveway #ThemoneyPit hobby. Thanks for watching and please share the knowledge help keep soundsystem culture alive. 👍🏾
I hear that before don't buy no of anything lol but I always do
Which shopping site can I get one of those for a reasonable price to purchase on ....I have one of the 1200s I need a 2400 or 3600 🙏😪... best amplifiers ever built ...I really do need one tho
Would it cause a electrical fire if you ran a crown macro tech 3600vz on a 15 amp wall outlet and went full power on the power amplifier itself.
The crown macro tech 3600vz has a 30amp plug not the regular 15amp wall outlet plug so that wouldn't work unless you get a 15amp adapter to convert the 30amp plug first off. To answer your question no it won't cause a fire but the breaker would most likely flip on what ever outlet your using. The 3600vz idles at watts just to give you an idea of the amount of electricity it needs. Thanks
I'm just curious...if you use QSC, CVR, CROWN, and POWERSOFT then why Beringer????🤔
crown rate them amps Min power guarantee. those are tanks, I had used a Power Base 1,2 K2 Itech 6000 Macrotech I 9000 they never fail even the Power base 1,2 below ther rated load they never therm out,
Is a mixing console required for a pro audio amplifier to get loud
No it's not. Your dj mixer is judt fine. That will boost the signal as well.
wont fit in a dryer outlet, thats a RV 30 amp plug on that amplifier. completely different than a dryer
at least they packaged it well mine was packaged poorly the rear ends got bent
Built like a tank easy fix. Thanks for watching
The manual says it handles both 110 volts ac and 220 volts ac but is there any particular reason why it would get damaged if it was plugged into a dryer outlet.
There is different versions 110v or 220v versions if you have a 220v version i would still use the proper distro before just plugging into a dryer outlet for added protection.
That Crown amp..... Eeeeehhh...
💪💪
If you were running 4 crown macro tech 3600vz power amplifiers in a rack should a rack mount power distribution unit not be used to power them
Yes indeed they draw lots of power from a regular outlet, wouldn't work well without a distro unless your gonna plug them into different outlets. Thanks for watching
Many are cautious about buying Behringer equipment....
What is it about the Inuke is impressive to you..?
Hey, yes inukes 12000 have been proven to be heavy hitters for the price and wattage you can't go run. There' not tanks like the macro tech so you have to treat them with care and they will get the job done. Bottom line they put out some serious power at least 85 percent of power rating your getting. Thanks again for watching.
@@Djshaw1kinglegend How is their damping factor compared to the Crowns....
Nice amp. What would be really nice is a MacroTech 10000, perfect for a nightclub, but as rare as hen's teeth, sadly.
Hey Thanks, yeah 10000 macro techs are rare and not to forget very heavy lol.
I still have 2 racks full of microtech amps those fuckers heavy
Getting my 3600
Do fake copycat Chinese clones of the crown power amplifiers exist
Yes indeed.
Good 👍 greetings from indonesia
Thanks for watching 👍🏾 i appreciate your support ✅
Sepa la berga que dice
wish one better for sub
I think You need a speaker load before you turn them on.
No not at all. Turn them on when ever you want, these amplifiers are tanks. Thanks for watching subscribe and share the knowledge 👍🏾🔊✅️