Hey Mike, what's up...? Tell me, can u add a generic interface like the DrewLinq or the Nexiq to work with Davie4, if possible, how shld I go about it ? Thank
How’s it going? Yes you can add usb link 2 to Davie 4, just go to Davie settings and change adapter selection. If you need more help I can make a quick video and post it on here. Let me know and thanks for watching.
Hi mike I have problems with cecu3 the truck pass like 4 month at the dealer because they don't have it on stock is a back up order..I purchase one on ebay take it to then and they said that will not work on my I put it my self and truck star and everything but not acceleration my truck is a 2014 peterbilt 384 with paccar am located in NJ please any help or idea or fix for the esue can you fix it if you not far I will take truck to you thanks
I have no experience adding a digital gauge to the cluster. But I can check tomorrow and see if I could figure it out, if so I’ll let you know and make a video. Thanks for the suggestion
@@freebeerandpizza2008 Iv got a genuine usb link 2 - davie4 works but its online and 4k+ is to much for me lol would davie 2 or 3 work on usb link 2 ? thanks
This isn’t a tuner, it’s the factory Paccar Davie 4 program for diagnostics. You would have to buy this program from your local dealership and use a usb link 2 to hook up to the truck. Where are you located?
Hi Mike, I'm tired to pay a LOT of money on diagnostic and repairs on my Paccar's engine, I want to get a software and bee trained to used, I'm old mechanic but new technology is killing me, I have 5 trucks with Paccar engine, how sure I star,?
Contact your outside sales rep from Peterbilt or Kenworth they can get you setup with Davie 4. As for training there is a couple videos you can find on google & RUclips. Let me know if there is anything you want to know.
Hey mike hoping you can help, I’m trying to do a system update the PCI updates fine and has a green check mark but the after treatment system won’t read or update . Do you have any tips or suggestions
When I try the update the first half PCI updates fine even has a green check but when it try’s to read the EAS-3 it does read and it says fail and kicks me back to the update screen
This is just how to update Paccar computers with Davie 4. If you are looking to purchase it is best to contact your local outside sales rep from Peterbilt or Kenworth.
@@劉宗易 it all depends on your outside sales rep. I have heard different prices from a lot of people. But if you would like it my sales rep said he can get it for you for $1,700-$1,800
@@freebeerandpizza2008 I did a dpf delete on my paccar mx13 2014... now after installing of ecu the transmission which is a 13 speed ultrashift not recognizing the ecu so the truck won’t start I get this in the gear display “**”
I haven't done any. From the notice I read from Peterbilt it looks like it has to be approved then it would be flashed in with Davie once they push the update. Hope this helps
Engine integration parameters tab is for setting engine functionality parameters. You can pull the set engine parameters from the engine you are hooked to at that time to set parameters on another vehicle through pvp. Hope this helps
If you have changed parameters in paccar vehicle pro, what's the process in Davie 4 to install them into the truck? I thought it was just updating the software but I'm having problems making them stick. In PvP I hit save and continue, then verify my changes, then send it to the back office. But still have problems getting them to take.
@@freebeerandpizza2008 yes I've done that. I did it twice this morning and the parameters still didn't take. What does the Engine Integration Parameters button supposed to do in Davie?
You’ll have to wait until it shows there is available update on software update page. If you just reprogram it before the software recognizes you changed parameters nothing will change.
@@freebeerandpizza2008 On neutral is fine when I am driving it . I purchase it from Schneider maybe Schneider have a special software I want to fix this problem goes very slow
Thanks for all info
I did update and even saw big green check mark but still yellow triangle
What module did you program to get the green check mark?
What module is the yellow triangle on?
Thanks for your videos. Why only shows 2 modules?
Older truck
Hey Mike, what's up...? Tell me, can u add a generic interface like the DrewLinq or the Nexiq to work with Davie4, if possible, how shld I go about it ? Thank
How’s it going? Yes you can add usb link 2 to Davie 4, just go to Davie settings and change adapter selection.
If you need more help I can make a quick video and post it on here. Let me know and thanks for watching.
I am looking for how to recover the transmission ECU procedure. Red service light is on, but the transmission ECU isn't able to be read.
What year is the truck? Does it have a paccar transmission?
Thanks for the info
No problem 👍
Hi mike I have problems with cecu3 the truck pass like 4 month at the dealer because they don't have it on stock is a back up order..I purchase one on ebay take it to then and they said that will not work on my I put it my self and truck star and everything but not acceleration my truck is a 2014 peterbilt 384 with paccar am located in NJ please any help or idea or fix for the esue can you fix it if you not far I will take truck to you thanks
Sorry to hear that, I am in Ohio. Do you have esa and davie 4?
Hoping you can help. But if you have ESA could you make a video of how you can add a digital gauge to the cluster?
I have no experience adding a digital gauge to the cluster. But I can check tomorrow and see if I could figure it out, if so I’ll let you know and make a video.
Thanks for the suggestion
@@freebeerandpizza2008 Hello Mike can the usb link 2 use any davie software or is it just davie4? thanks
Just Davie 4 I think. What Davie version are you referring too? Davie 3?
@@freebeerandpizza2008 Iv got a genuine usb link 2 - davie4 works but its online and 4k+ is to much for me lol would davie 2 or 3 work on usb link 2 ? thanks
Davie 4 didn’t cost me that much. No Davie 3 will not work with usb link 2.
How about doing a switch relearn, is that on Davie or ESA
A chassis side switch will be on ESA program
HEY MIKE, CAN YOU MAKE A VIDEO HOW TO CHANGE PARAMETERS LIKE SPEED LIMIT AND UPDATE PLEASE
Yeah I can make a video on how to change speed. Give me a few but I’ll bet it done
THANK YOU MIKE
Yes please can you make a video on how to change the speed?
hi mike
im new to davie xdc4
is that work with vci 560
and another question
do you have phone nomber to contact and buy program?
I don’t know what xdc4 is. If you are talking about Davie 4 I use nexiq usb link 2. Contact local Paccar dealer rep to purchase
Hi brother I need to now how can I test the ac door Actuators my truck is not blowing air from the center vents I have esa software thanks
I’ll have to see if there is an option when I hook up to another truck. But it won’t be on Davie it’ll be on ESA probably
Hello sir I tried to go threw my local kw to purchase davie4 software but was declined. Where can I purchase it also looking to get eportal access
Hope all is good and working great
That cool do I need to download the software from where
You have to pay a paccar dealer to get Davie 4
We blew a turbo, mech did some stuff, turbo pops off t 20 psi.. no Jake.... going on 4 weeks.. need a good tuner. Comms ??
What do you mean?
@@freebeerandpizza2008 Need a pacar tuner. Current guy has been on the case for 3.5 weeks.... cant get it to run...shoot me a link..
This isn’t a tuner, it’s the factory Paccar Davie 4 program for diagnostics. You would have to buy this program from your local dealership and use a usb link 2 to hook up to the truck.
Where are you located?
Hi Mike, I'm tired to pay a LOT of money on diagnostic and repairs on my Paccar's engine, I want to get a software and bee trained to used, I'm old mechanic but new technology is killing me, I have 5 trucks with Paccar engine, how sure I star,?
Contact your outside sales rep from Peterbilt or Kenworth they can get you setup with Davie 4. As for training there is a couple videos you can find on google & RUclips. Let me know if there is anything you want to know.
Hey mike hoping you can help, I’m trying to do a system update the PCI updates fine and has a green check mark but the after treatment system won’t read or update . Do you have any tips or suggestions
What’s the topology map show?
Sorry I’m new to the Davie 4 program what’s the topology map
When I try the update the first half PCI updates fine even has a green check but when it try’s to read the EAS-3 it does read and it says fail and kicks me back to the update screen
Go to this video and go to 29 seconds
ruclips.net/video/oXTXXyrs9RQ/видео.html
Never had that happen to me yet. Is the batteries charged up? If so I would contact dealer support.
What is the difference between Paccar davie diagnostic and eportal access?
Davie 4 is the diagnostic program on the laptop to hook to the truck and eportal is the website to access repair information, wiring diagrams and etc.
Hi mike how to reprogram the cluster
You have to use esa
@@freebeerandpizza2008 hey mike can I use davie 4 with nexqi usb2
Boa tarde tudo bem esse software você instalar
This is just how to update Paccar computers with Davie 4. If you are looking to purchase it is best to contact your local outside sales rep from Peterbilt or Kenworth.
Hi Mike, is the PACCAR MX13 computer diagnostic instrument available for sale?
Yeah if your local sales rep can't help you I can try to get it setup for you. Let me know
How much is the complete set of instruments
@@劉宗易 it all depends on your outside sales rep. I have heard different prices from a lot of people. But if you would like it my sales rep said he can get it for you for $1,700-$1,800
What is included in the 1700/1800 USD
@@劉宗易 it’s just the program
What is you do a dpf delete how do you set the Parameters to communicate with a ultrashift transmission?
Do what? This is software to diagnose a Paccar engine
@@freebeerandpizza2008 I did a dpf delete on my paccar mx13 2014... now after installing of ecu the transmission which is a 13 speed ultrashift not recognizing the ecu so the truck won’t start I get this in the gear display “**”
I have no clue
Hey I have an son 587 fmi 12 code after I tried to do an update on an mx13 and the update somehow failed. Now the truck won’t start. Any idea?
Yeah the ecm to be programmed. It will now need a password since it failed during a flash.
Can you teach me how to disable my paccar engine form shutting down after 5-10 minutes on davie4 thanks.
I assume you’re talking about idle shutdown?
@@freebeerandpizza2008 yes pls, is there An option on davie4? I tried to disable it under repair support, but didn’t work
You have to use pvp and then update the software in the truck
@@freebeerandpizza2008 pvp? Is that a different type of application? Something I can’t do with davie4?
It’s a web based program if you have Davie 4 you should have pvp
ECM not connecting to pc , what to do
did you get a red x anywhere at the bottom of the screen? If not it could be that you need the paccar y cable.
Can I increase horse power with devi 4?
No you cannot increase hp with Davie 4 alone.
Can you make a video on how to increase rpm or how to increase horse power please 🙏?
I have no idea if there is an option to increase hp. If there is it would probably have to be a case created in tcs
How do you perform the update for bypassing the issue with the def header shortage?
I haven't done any. From the notice I read from Peterbilt it looks like it has to be approved then it would be flashed in with Davie once they push the update. Hope this helps
@@freebeerandpizza2008 👍
What is the engine intergration parameters
Engine integration parameters tab is for setting engine functionality parameters. You can pull the set engine parameters from the engine you are hooked to at that time to set parameters on another vehicle through pvp.
Hope this helps
Hi. How do I get the dave program?
You will have to contact your local kw or Pete outside sales rep. If they won’t help you let me know and I’ll have mine get it setup for you
@@freebeerandpizza2008 661 377 4222 Francisco
If you have changed parameters in paccar vehicle pro, what's the process in Davie 4 to install them into the truck? I thought it was just updating the software but I'm having problems making them stick. In PvP I hit save and continue, then verify my changes, then send it to the back office. But still have problems getting them to take.
You have to reprogram truck in Davie 4
@@freebeerandpizza2008 yes I've done that. I did it twice this morning and the parameters still didn't take. What does the Engine Integration Parameters button supposed to do in Davie?
You’ll have to wait until it shows there is available update on software update page. If you just reprogram it before the software recognizes you changed parameters nothing will change.
Never used the integration parameters I’ll look later
Never used the integration parameters I’ll look later
Você tem contato do pessoal que instala software davie4
You have to buy it from an outside sales rep from Kenworth or Peterbilt
Alguém istala software devia4
Yes it is available to buy.
need help my kenwoth not going more then 14 rpm
Not going above 1,400 rpm? When I’m neutral or all speeds
@@freebeerandpizza2008 On neutral is fine when I am driving it . I purchase it from Schneider maybe Schneider have a special software I want to fix this problem goes very slow
@@fourseasonstruckingllc5520 do you have Davie 4? If so send me vin and contact me through my website
Hey mike is there anyway to recalibrate the egr valve or to just shot power to it
Not that I have seen. What year is your truck?
Hello dear, i need this software Davie4
Gotcha contact your outside sales rep from peterbilt or Kenworth. If they won’t help you let me know
Olá preciso de software davie4
?
All a rip off
You don’t like the Davie program
Do you use jpro then?