EDC Leather 752 SnapCake Click n Ship Leather Holster Assembly Tutorial
HTML-код
- Опубликовано: 13 янв 2025
- In today's video, we are showing how to assemble our newest Click N Ship and pattern product, the SnapCake. Jeff goes over how to assemble them and how to set up the snaps on the straps. Make sure to check these holsters out because they are awesome.
Purchase your own 752 SnapCakes: edcleather.com...
LINKS
=======================
EDC Leather Facebook: www.facebook.c...
EDC Leather website: edcleather.com/
TOOLS WE USE
=======================
Sara Hagel's Slicking Solution: edcleather.com...
K40 Laser Engraver: amzn.to/2Vxptb0
Sewing Machine: leathermachine...
Cutting Board: amzn.to/3jW5Hz6
12x12 6oz. Leather Panel: amzn.to/3nirmDZ
Angelus Light Brown Dye: amzn.to/3jWJYqU
Olfa Knife: amzn.to/38WhjMu
Olfa Black Blades: amzn.to/3yXukQu
Scratch Awl: amzn.to/3hinXAW
Masters Contact Cement: amzn.to/3jZ70xy
Stitching Thread: amzn.to/3E5Q2VU
Stitching Needles: amzn.to/3l72bBv
Belt Sander: amzn.to/3BTNj00
Drill Press: amzn.to/3z0i6X0
Sanding drum: amzn.to/2XcMAbF
Edge Beveler: amzn.to/3A11AHE
Large Acrylic Dye Pens: amzn.to/2X3SziH
Copic Wide Dye Pen: amzn.to/3ng2OLB
Metal Machining Burr: www.grizzly.co...
Curved Slot Punch: www.usacuttingd...
T-nut Setting Tool: edcleather.com...
Carnauba Creme: amzn.to/3jVaAbS
*As an Amazon Associate, any purchases made through our links will give us an affiliate commission. Thank you for supporting us.
I need the snapcake click and ship, the stitch pattern, for a Springfield Operator railed 5 in.
Left hand with black shark trim
And if you guys do the 1911 mag pouch as a click and ship with black shark I’ll take 2…..lol
Thank you for the tutorial Jeff.
Are using the 277 thread or is it 207?
Glad you explained the various steps.
And placement of the two types of snaps.
277 top thread, 207 bobbin
Do you have any patterns for S & W 380 EZ shield for holster and stich line?
Any idea when you might have some 1911 snapcake patterns?
Couple weeks
@@EDCLeather good deal! Thank you.
Wouldn't pull the dot snap work better on bottom snap?
You absolutely can use a pull the dot on the bottom as well. Some people have challenges getting the release orientation correct on the lower snap, by using a hard action in the lower location and a pull the dot in the upper location we feel you will get the best from both worlds
I have been using resolean on belts for years, now I'm worried 😟
Where can I find the 2mm hex head screws?
Edcleather.com
I looked in the tools and hardware section and don’t see them. Can you please send me a link?
@@sasquatchscousin9613 edcleather.com/product/752-snapcake-hardware-set-5-pack/