Unboxing - 750mm FMS A6M3 Zero.

Поделиться
HTML-код
  • Опубликовано: 15 окт 2024

Комментарии • 20

  • @SunriseRCAviator
    @SunriseRCAviator 3 года назад +1

    I would recommend checking CG very carefully. I had to put about 30g of led weight inside all the way to the front for it to balance properly. You don't want to fly it tail heavy as it will crash. On maiden it worked out great and flew about as good as the FMS T-28.

    • @FlankerTanker
      @FlankerTanker  3 года назад +1

      I will indeed check the cg is correct I often have to add weight to ensure cgs are correct on aircraft..is the cg shown in the manua in thel correct place ?

    • @SunriseRCAviator
      @SunriseRCAviator 3 года назад +1

      @@FlankerTanker Yeah I balanced mine on the correct CG point according to the manual so this appears to be correct. Just to add some weights.

  • @purcellrcaviationchannel
    @purcellrcaviationchannel 3 года назад

    Disaster averted! Thankfully all will be well and it'll fly fabulously.

    • @FlankerTanker
      @FlankerTanker  3 года назад

      Short repair video coming up this weekend. Lol.

  • @FlankerTanker
    @FlankerTanker  3 года назад

    Hi Keith - Yes I do have one it is the FMS 1100mm - and it too big for the 800mm collection - so I thought I would get a 750mm Zero. Thanks for the Info ...

  • @enzok6414
    @enzok6414 3 года назад +1

    do all FMS planes come with a loose ESC? My 980mm P40 has a huge ESC just flapping around in the nose. and it was really hard to get it fixed in that small room.

    • @FlankerTanker
      @FlankerTanker  3 года назад +1

      From my experience no not all of them - just some - I find a bit of hot glue, or double sided foam, even Velcro can be used and will hold a loose ESC in place - loose esc's are not just and FMS thing - I have an F4F wildcat from e-flite and that also had one - Hobby Kings aircraft tend to have a loose ESC - its quite common, I have quite a few and almost all of them have (HAD) loose ESC,s

    • @enzok6414
      @enzok6414 3 года назад

      @@FlankerTanker right, on some planes have it easy to reach, like your zero. And some of them are not that big compare to my 980m p40. That thing has a 70A esc, probably weights 80g or so. Then I had to glue it down, or thing is gonna change CG mid flight. Plus it was super hard to reach. Had to apply glue with a chopstick. Lol
      And very nice review on the zero btw.

  • @alfonsodominguez363
    @alfonsodominguez363 3 года назад

    Open a dispute to the AliExpress seller, upload photos and this video. Likely you will get a partial refound and you can still fix the airplane

    • @FlankerTanker
      @FlankerTanker  3 года назад

      Thanks for the advice I will give it a go.

  • @MONTY-YTNOM
    @MONTY-YTNOM 3 года назад

    I have a FMS trainer Glider1380 and the hinges on that are really bad, all cracked and broken. Like your rudder

    • @FlankerTanker
      @FlankerTanker  3 года назад +1

      It will be a quick fix using some Foam Tac... I will make a video as its always good to know....

    • @MONTY-YTNOM
      @MONTY-YTNOM 3 года назад

      @@FlankerTanker Yer must get some foam tak. I have UHU POR will that do

    • @BRIANFORWARD1
      @BRIANFORWARD1 3 года назад

      Hi martyn
      I see your V2 is the same as mine no flight stabiliser. Yet your corsair V2 did.????..so when are you starting on the extension on the house to store all these kites....hahahahhaha. I'm in the same boat
      Take care
      Brian

    • @FlankerTanker
      @FlankerTanker  3 года назад +1

      @@MONTY-YTNOM yes it will its the euro version of foam tac....

    • @FlankerTanker
      @FlankerTanker  3 года назад

      @@BRIANFORWARD1 yes this one had none I might fit a stab of somesort in it or just try it without