Here we go again, a vault value as well as the total individual metal weights. A big jump in value from last time, which is always good so stick around to see that. Also a Motor melt and a heap of custom pewter coins from some jugs a Subscriber sent me so sit back. Relax enjoy the video, but most importantly, have a happy safe weekend and hope to see you all on the next one 👋🏻😆
😎💫👍Good job This is a video or work is better than the previous one What you were doing You were doing or tiring yourself in melting small ingots Large plumbing is better for you to work and also the race No problem in melting a few pieces race Medals were good of all kinds I mean metals The important thing is the metals that you melt Ingots not a kilo or half a kilo You should do five kilos or more This way it will be better for you Another note also when you pour like molten copper in an iron can on it To cool down, right? Put a fan near you to cool After that you get out of this can It is better for you or faster in cooling the metal After that you put it in water It is faster for you Greetings to you
@bigstackD, I always count these 2 films as my all-time favorite. Alien and Aliens. When I saw Alien in the theater and at the end of the movie, I had not realized that I gripped the armrests so hard that my knuckles actually hurt! Then the sequel, Aliens, which I think was as good as the original! It's rare that a sequel will do as good or better than the original.
I HAD MY FIRST MELT YESTERDAY!! I finally decided to get a cheap forge because of my limited space but I tempered my first crucible a few days ago, then melted my first batch of copper. I used to watch your videos and marvel at how great they are, but now that I really understand how backbreaking it can be, I have a truly deeper appreciation for your content brother. THANK YOU for introducing me to the addiction! Now I understand why you melted all your window screens in your last house a couple years back. I may be doing the very same thing if I can't find scrap to melt!
I did the same thing; if you go out on trash day, pick up any electronic device, they have a ton of copper and aluminum, and keep the circuit boards because they are full of precious metals like gold.
@@tjboylan20 My 98 year old neighbor died a few months ago and his son sold the place. The new people rented a dumpster and gutted the place. I happened to see them throwing away so much copper wire & told them they should really save the wire but they said they didn't have the time to deal with it but I could have it if I wanted. I pulled the wiring and 7 light ballasts, stripped the wiring & opened up the ballasts. It was covered in tar or something but I pushed through and stripped it all out. I get the feeling it was copper coated aluminum. Wasted time there, but the wiring I stripped was about 4kg so it was definitely a great learning experience! I already save all the PCBs I come across because the copper and gold content. Sreetips and Cody's Lab does a lot of gold recovery from boards, specifically the RAM slots. I probably have enough lying around to justify buying the acids to get that going
@@kenanderson2002 i love watching sreetips i have about 10kg of circut boards i my goal is to get 1000kg because i am going to make my wedding bands out of them, it takes a lot of planning ahead to save up that much, i can probably reach it in 5 years
I thought I was the only one that did that on bigstackD videos! 🤣From much experience I know for a fact it's not going to be a video I don't like so I click the thumbs up first to ensure I don't forget to lol
@@bigstackD ok, so it's just an accidental rain barrel with motors? I was wondering if I missed a video where you said why you should soak your motors before melting them. 😅
@@bigstackD and if you're living in a tropical climate like malaysia, you'll get fined by the district health office..stagnant water is a breeding ground for mosquitoes, which spread deadly diseases like the dengue fever..i got a warning once from the health inspector because there were potential breeding spots for these mosquitoes, and it was the rainy season.
I used to be a scrapper via my haulage business now retired but still recycling cans for community projects . brings back memories of that feel good factor of recycling not the money aspect of it but the satisfaction. carry on the good work and love the Indy stuff and the vault. And most of all the treasure chest
Hi Mr.Big, congratulations on your vault value. You deserve every penny and more. You bust your ass breaking down them machines and melting that stuff is dangerous . You get my respect . As far as all time favorite movies there can only be one in my book and that is the original Blues Brothers. After that there are too many honorable mentions .Except the first 3 Pirates of the Caribbean movies.
I'd love to see a video where Bigstack just went all in on cleaning up the shop and the area. I once had a boss who would have gone crazy if he saw a work space looking like that.
The Back to the Future Trilogy are some of my FAVORITE films!!! And the FIRST Star Wars Trilogy too!!! I used to not like the Second Star Wars Trilogy, but after seeing this new Trilogy, the Second Trilogy isn't so bad LOL
Coins turned out pretty good. We gotta get you some better sand though and they’ll be even better. I’ll get the molds shipped out to you soon though 👍🏻🍻🍻🍻
No problems mate yeah the sand in Australia is pretty shit. I wish I had the American sand but not worry I’ll make do. And if I did have the good sand then I’d have no excuses when I screw it all up so maybe it’s a good idea I stick with the shit sand. Or Maybe it is good sand here and I’m just bloody useless 🤔
@bigstackD what about painting the surfaces with white paint (pigment Titanium Dioxide). It will resist the heat and smoothen the surface? Few layers of spraypaint?
@@bigstackD gotta head to that chemistry shop there in Perth. Get you some Hydrochloric and Nitric and you can make super pure sand. You could experiment with glass and Iron!
Awesome melt, wasn't expecting to see you melt Pewter, Nice surprise there mate. And I'm glad the see that Ingot and Bullion are still doing well. Cheers!
*NEW IDEA* ( I think): Take a few days off and do some camping/fishing. Do some magnet fishing while you're there. You never know what you'll pull out of the water. TRUST ME. Then melt. 🔥
Nice melt Big D! Those coins came out nice! Indiana Jones is one of my faves as well. The stack is growing in value! Awesome stuff! Take care brother. Talk soon.
Thanks! You too buddy👊🏻😁. Sorry I cut the chat short today but had to get a bit of shit done. So definitely catch up next week or the week after. But I don’t think we cut it too short we were talking for 90+ minutes! And from what I can remember it was all bullshit anyway👊🏻🍻🍻🍻
Ooh it’s been a long time since the last time I randomly woke up at 3~4 am to watch your just uploaded video 🎉. Thanks again and again for your awesome videos ❤ Cheers from Chile 😊
This is the Best video, I ever encountered in my honest opinion. Big Stack D maybe you should consider having little cool coin shop & sell to the public, very gifted in your craft. You would make nice profit, I would definitely purchase some cool silver from your coin shop. That’s some awesome skill’s & it takes lots of patience & knowledge your true craftsman, keep up good work in the long run it pays off.
I’ve not watched your channel for a few years (you know how life can get, very distracting) the last time i watched, you were melting outside your garage and you only had a couple of shelves full. Glad to see you’ve came so far bud! Keep it up!!
A few more weeks and it will be spring for you. I can't wait for winter here. Hot and humid summer for us here in Atlanta, Georgia. Another great video, man. Keep it up
I really enjoy consistency in life. I like knowing that the sun rises in the east, that chips will go on sale before big sporting events, the cardboard stops firebrick sticking, that I'll never be able to change my oil without getting it on my face, and that Ingot will always rub his junk on that carpet. It's the little things.
Those coins came out great! That aluminum brick is HUGE! I look forward to each and every video! My favorite movies (no, I can't pick just one): The Martian, Lord of the Rings Trilogy, Independence Day, Die Hard, Goonies, Indiana Jones (all but the third was my favorite), Serenity (from the Firefly series) and Final Fantasy VII Advent Children.
Good vid bruv. Goonies to answer your question. It'sits literally what got me watching you in the first place. When you were using different material for "the key to one eyed willy". Thx again for the entertainment
Yes, goonies is an absolute classic one of my top five films ever. I was eight when it came out so really stuck with me over the years and I’ll watch it at least once a year in the background, while tinkering in the shed, even if it’s only for the soundtrack or music score 👍🏻.
Hey, thanks so much I really appreciate it my friend. You are an awesome human being. Definitely will enjoy a pint or two although it cost so much at the pub nowadays I would much rather just buy the beer and come home and drink it with my boys that way I’ll get 3x more👌🏻. I tell ya the bloody rain today has been unbelievable !!! I went to the scrapyard got myself a huge ass Motor that my friend put aside for me brought it home and in between storms. Got it off the trailer. Got it set up ready to go in the melting area then the bloody rain on off on off on off Then it’s gone back on and it stayed raining for the last probably five hours and it got dark four hours ago so I’m trapped in the shed with my beer fridge so it’s not a bad thing I suppose. Hopefully tomorrow it clears even for a little bit so I can try and break into this piece from the scrapyard🤞🏻. Thanks again my friend have an awesome weekend 👊🏻😁. And if I don’t get at least 20 kg of copper out of this thing, I’m gonna be very disappointed 🤔
@bigstackD Don't be disappointed if it's under 20kg ( I think you're gonna get more) but just think it's more to add to your coffers. Sorry about all the rain but it is winter over there and here it's summer and hot and rainy from Texas to California the area that my husband and I Team drive semis. So I feel for you.
I wish I had of captured some of last nights weather it was a massive thunderstorm and I really thought it was gonna take a tree down or two on the property. Absolutely shocked that it didn’t but it was pretty awesome whether either way. I do love the wet weather it’s just a pain when you’re trying to film 👍🏻.
Favorite film is The Princess Bride! Also another great video, m8! Thanks for keeping up with it ❤️ I’ve started my own foundry thanks to your inspiration! :)
From your poll, this week... Dude, there are two channels I watch religiously, every week, you and the Hoover Boys. The more videos the merrier. Love them keep them coming.
🧲 i'd love to see you walk with a strong magnet in your backyard. there will be new block with that metal dust, sure😄 with love and respect from Türkiye my metalhead brother 🤘
Please send that rain to Texas! I do so enjoy watching your videos before i go to work, but then i have to wait a whole week before there is another video. I guess that means i will have to binge some of my favorite videos.. Much love from Texas!
Hello again Bigstackd. It’s a bit after 5am EST 8/24/24 in Detroit, MI U.S.A. and I’m finally getting a chance to watch this vid uninterrupted. Hope you and yours are well. 🥰
Yep, all good over here just getting over a thunderstorm so hopefully it’ll clear up tomorrow and I can get started on next weeks video. Have a great weekend my friend👊🏻😁.
I know that the pride you have in what you do makes it irrelevant in 99% of why the world turns, but is the value you have better than the investment? I started smelting because of your videos, and enjoy the hell out of it, but i have a long ways to go. Like most hobbies, i am not into for the money, i am just curious that way
I’m quite happy to spend five dollars in gas on a $10 bar as all these pieces are what I do on my days off from my normal full-time job and that’s why I stack it up and don’t sell it . 👊🏻 if you took into account all the gas usage I would still be way in front but if you took into account at the time I’ve spent doing all this then I’m way behind , but like I said this is a hobby I love it it’s very rewarding so I’ll keep on going for as long as my little legs carry me 👍🏻.
My favorite fantasy adventure film is Conan the Barbarian with Arnold S. My favorite comedy is Ace Ventura Pet Detective. My favorite biodoc is Crumb. I could go on but as you can tell I do not pick a favorite overall... too many good ones. I will only pick favorite of a genre.
Here we go again, a vault value as well as the total individual metal weights. A big jump in value from last time, which is always good so stick around to see that. Also a Motor melt and a heap of custom pewter coins from some jugs a Subscriber sent me so sit back. Relax enjoy the video, but most importantly, have a happy safe weekend and hope to see you all on the next one 👋🏻😆
WHAT is that a motor of some sort?
😎💫👍Good job This is a video or work is better than the previous one What you were doing You were doing or tiring yourself in melting small ingots Large plumbing is better for you to work and also the race No problem in melting a few pieces race Medals were good of all kinds I mean metals The important thing is the metals that you melt Ingots not a kilo or half a kilo You should do five kilos or more This way it will be better for you Another note also when you pour like molten copper in an iron can on it To cool down, right? Put a fan near you to cool After that you get out of this can It is better for you or faster in cooling the metal After that you put it in water It is faster for you Greetings to you
@bigstackD, I always count these 2 films as my all-time favorite. Alien and Aliens. When I saw Alien in the theater and at the end of the movie, I had not realized that I gripped the armrests so hard that my knuckles actually hurt! Then the sequel, Aliens, which I think was as good as the original! It's rare that a sequel will do as good or better than the original.
Could have seen gold and rose gold melting . Would be awesome . The price list. Can't see , very blurry
Dune the original 1986 or anything Sci-Fi
I HAD MY FIRST MELT YESTERDAY!! I finally decided to get a cheap forge because of my limited space but I tempered my first crucible a few days ago, then melted my first batch of copper. I used to watch your videos and marvel at how great they are, but now that I really understand how backbreaking it can be, I have a truly deeper appreciation for your content brother. THANK YOU for introducing me to the addiction! Now I understand why you melted all your window screens in your last house a couple years back. I may be doing the very same thing if I can't find scrap to melt!
I did the same thing; if you go out on trash day, pick up any electronic device, they have a ton of copper and aluminum, and keep the circuit boards because they are full of precious metals like gold.
I'm looking in to it with my grandson and looking in to a transit tipper go round collecting aluminium brass copper etc fingers crossed it works out
@@tjboylan20 My 98 year old neighbor died a few months ago and his son sold the place. The new people rented a dumpster and gutted the place. I happened to see them throwing away so much copper wire & told them they should really save the wire but they said they didn't have the time to deal with it but I could have it if I wanted. I pulled the wiring and 7 light ballasts, stripped the wiring & opened up the ballasts. It was covered in tar or something but I pushed through and stripped it all out. I get the feeling it was copper coated aluminum. Wasted time there, but the wiring I stripped was about 4kg so it was definitely a great learning experience! I already save all the PCBs I come across because the copper and gold content. Sreetips and Cody's Lab does a lot of gold recovery from boards, specifically the RAM slots. I probably have enough lying around to justify buying the acids to get that going
@@kenanderson2002 i love watching sreetips i have about 10kg of circut boards i my goal is to get 1000kg because i am going to make my wedding bands out of them, it takes a lot of planning ahead to save up that much, i can probably reach it in 5 years
Me too! Poured a nice 8oz button of cu and a little over 2oz ag. Definitely something special about the process and the end product.
I totally love
Nordic Gold Videos,
I did gold mining as s teen & am amazed by how much it does shine like
GOLD
A channel i can click thumbs up before the video even starts ! awesome , Just lovin it!😍😍
It's a great watch on a Friday isn't it!
I have a few that I don't wait to click the like, but BStackD is high on that list.
I thought I was the only one that did that on bigstackD videos! 🤣From much experience I know for a fact it's not going to be a video I don't like so I click the thumbs up first to ensure I don't forget to lol
2 channels I'll hit the thumbs up before the videos start is, BigStackD n Art by Adrock. Love watching you 2. 👍👍👍🇦🇺🇦🇺🇦🇺
Motor full of water = No Spiders!
Pretty smart way to store things.
Actually it wasn’t done on purpose that tub was empty two months ago. It’s all this bloody rain I keep getting 👍🏻
@@bigstackD ok, so it's just an accidental rain barrel with motors? I was wondering if I missed a video where you said why you should soak your motors before melting them. 😅
@@tylerpeterson4726maybe get all the grime off it? No contaminants.
@@bigstackD and if you're living in a tropical climate like malaysia, you'll get fined by the district health office..stagnant water is a breeding ground for mosquitoes, which spread deadly diseases like the dengue fever..i got a warning once from the health inspector because there were potential breeding spots for these mosquitoes, and it was the rainy season.
Drill some drainage holes 😎👍
I liked the thermometer during the quench. Great idea. My favourite movies are: 2001 A Space Odyssey; Laurence of Arabia and Alien.
I used to be a scrapper via my haulage business now retired but still recycling cans for community projects . brings back memories of that feel good factor of recycling not the money aspect of it but the satisfaction. carry on the good work and love the Indy stuff and the vault. And most of all the treasure chest
Hi Mr.Big, congratulations on your vault value. You deserve every penny and more. You bust your ass breaking down them machines and melting that stuff is dangerous . You get my respect . As far as all time favorite movies there can only be one in my book and that is the original Blues Brothers. After that there are too many honorable mentions .Except the first 3 Pirates of the Caribbean movies.
Oh ad this is the first time I've seen the thermometer during the "quench" . Pretty cool idea. Interesting to watch. 👍🏻👍🏻
Keep doing what you love, man. We support your endeavors.
I'd love to see a video where Bigstack just went all in on cleaning up the shop and the area. I once had a boss who would have gone crazy if he saw a work space looking like that.
And here I am wishing he was for hire to come organize my house…
39:24 total stack value
Don't worry, I always watch the whole movie :)
@@hohiss83I don't
@@earthwormandruw im very sorry for you:(
So how much was it all worth?
@@Joshua40 13447 usd
One of my favorite movies is Momento. And my favorite line from it was "I can't remember to forget you."
Thanks for the video. It's Friday morning here in Texas and it's 3:55 am. Have an an awesome weekend and be safe.
Saludos desde México. Mi serie de películas favoritas: "Alien".
With enough scrape and metal you got you're self a tier 3 workbench.
Outstanding as always! Thank you good sir for your efforts in making these films i quite enjoy 😃 I wish you a very good weekend😊
The Back to the Future Trilogy are some of my FAVORITE films!!! And the FIRST Star Wars Trilogy too!!! I used to not like the Second Star Wars Trilogy, but after seeing this new Trilogy, the Second Trilogy isn't so bad LOL
Kelly's Heroes, The Changeling and The Goonies were actually my first rented VHS movies I watched at a friend's of mine back in primary school ☺
This is absolutely amazing. I love this channel and I’ve only seen one video. Makes me want to get into metallurgy.
The big hammer always rescues the little hammer!! That Pewter melting was SO satisfying 👌
It’s been a while since I watched one of your videos. It’s so great to be back and the videos are as epic as ever
Well then welcome back and be sure to check out what you’ve missed when you get some spare time👍🏻
Coins turned out pretty good. We gotta get you some better sand though and they’ll be even better. I’ll get the molds shipped out to you soon though 👍🏻🍻🍻🍻
No problems mate yeah the sand in Australia is pretty shit. I wish I had the American sand but not worry I’ll make do. And if I did have the good sand then I’d have no excuses when I screw it all up so maybe it’s a good idea I stick with the shit sand.
Or Maybe it is good sand here and I’m just bloody useless 🤔
@@bigstackD ha well that’s definitely a possibility 🤣
@bigstackD what about painting the surfaces with white paint (pigment Titanium Dioxide). It will resist the heat and smoothen the surface? Few layers of spraypaint?
@@bigstackD gotta head to that chemistry shop there in Perth. Get you some Hydrochloric and Nitric and you can make super pure sand. You could experiment with glass and Iron!
@@bigstackD what do you do for Easter last year and you said your kids were how old again and did you any Easter egg hunts?
Awesome melt, wasn't expecting to see you melt Pewter, Nice surprise there mate. And I'm glad the see that Ingot and Bullion are still doing well. Cheers!
*NEW IDEA* ( I think): Take a few days off and do some camping/fishing. Do some magnet fishing while you're there. You never know what you'll pull out of the water. TRUST ME. Then melt. 🔥
Solid idea
The magnet only attracts ferrous metals and steel which he cannot or doesn’t want to melt 😉
I love how the end of this one sounds like it's just the beginning...
I like the temp probe in the cooling water-fun idea!
now i understand why water cooling is a thing...that was marvelous to watch and beautiful to learn
Very nice!
I kinda like those high relief Egyptian coins... Those were cool....
Nice melt Big D! Those coins came out nice! Indiana Jones is one of my faves as well.
The stack is growing in value! Awesome stuff!
Take care brother. Talk soon.
Thanks! You too buddy👊🏻😁. Sorry I cut the chat short today but had to get a bit of shit done. So definitely catch up next week or the week after. But I don’t think we cut it too short we were talking for 90+ minutes! And from what I can remember it was all bullshit anyway👊🏻🍻🍻🍻
Ooh it’s been a long time since the last time I randomly woke up at 3~4 am to watch your just uploaded video 🎉. Thanks again and again for your awesome videos ❤
Cheers from Chile 😊
Good morning to you then my friend 👋🏻
The was amazing! Thank you for sharing. My wife and I were just talking about a vault, you've given me some ideas.
Those pups put a smile on my face every time
A smoke 🤔?
@@bigstackD lol I better proof read next time. Less smoke needed
Trust me Man I’ve left some voice text messages on the comments and it makes me look like I’m bloody brain-dead because of stupid AutoCorrect🤦🏻♂️!
Aw yeah!! That's my good Australian guy there!! Keep on melting copper bruh!! Copper is my favorite metal.
Same for Indiana Jones too.
This is the Best video, I ever encountered in my honest opinion. Big Stack D maybe you should consider having little cool coin shop & sell to the public, very gifted in your craft. You would make nice profit, I would definitely purchase some cool silver from your coin shop. That’s some awesome skill’s & it takes lots of patience & knowledge your true craftsman, keep up good work in the long run it pays off.
What a usefull grip you've received from fan.
Love the time lapse, it’s my favorite part for sure
Looking good, love the pewter melts. The vault is looking nice.
An other great video ! You never fail to satisfy us 🤘
Hello from France! Always on time!
Wow Mr. BigStackD that temperature probe was a great addition, never thought about the cooling water temperature before!
love these long format videos. I can get so much work done. Ty. Cheers!
bigstackD Casting, Subscribed because your videos always make me smile!
Love the film selection for the medallions. God bless
thanks for the videos i really liked the thermostat hopefully you keep that up :)
Awesome video always nice aluminum and copper bar and coins thanks for sharing bigstackd
Love the video, the melts, the boys, and your channel. Keep it up!!!
I’ve not watched your channel for a few years (you know how life can get, very distracting) the last time i watched, you were melting outside your garage and you only had a couple of shelves full. Glad to see you’ve came so far bud! Keep it up!!
Welcome back!
@@bigstackD still crackin content and good to see the wee pooches rockin and rollin still!
You folks down under sure have some of the most interesting and mouth-watering eats!
Idk why but I find it so so satisfying and relaxing watching him tear mottoes down.
To help with the shade sail whip, have two diagonally opposite posts higher than the other two posts
Very nice melt, a nice copper melt and a huge aluminum bar. Coins looked great too! Take care!
I found this very interesting. I do stack precious metals but never did any casting. If I were younger I might do something like that.
Just when I think I've seen all the interesting corners of RUclips I find this video
Great video again, see ya next week and always enjoy the rain while it last.😊
I finally get why you listen to classical music when you drive.
It's to balance all the hard rock that you listen to during the melts.
1. The GodFather
2. Cool Hand luke, Paul Newman
3. Pulp Fiction
Are my three go to Movies.
A few more weeks and it will be spring for you. I can't wait for winter here. Hot and humid summer for us here in Atlanta, Georgia. Another great video, man. Keep it up
TGIF from Long Island, NY USA
I love how that double pour of aluminium came out!
Loving the Asterix shirt!!! Great video as always.
Standing water like that here in Texas would have drone strike mosquitoes everywhere 😂
I really enjoy consistency in life. I like knowing that the sun rises in the east, that chips will go on sale before big sporting events, the cardboard stops firebrick sticking, that I'll never be able to change my oil without getting it on my face, and that Ingot will always rub his junk on that carpet. It's the little things.
Ingot has so much potential to be a great guard dog..Provided he can stay awake for longer than 8 minutes a day 🤣🤣..Lets get you to 2 million subs 🍺🍺
Eight minutes in one day. Damn, that’s a stretch for him🤔
9:25 As a French guys who enjoy your video, special applause for that T-shirt !!
Great video BSD! "I'll start with the aluminium first" cracked me up...
I don't believe that there is a "bad" Indiana Jones film!! They were (are) all really great!!
Temple of Doom is sort of iffy to me, but I still enjoy it. It's the least good of the five to me. Least good does not mean bad.
the Kingdom of the Crystal Skull was an Abomination Unto Nuggan
@@johntoldme Still better than Temple of Doom, though!
I used to work in the motor business. At the time, we would just throw things away. Glad you are recycling things.
The original Time Machine is mine. You sure are industrious, a pleasure to watch!
I think Bigstackd should melt a whole plane in the future
Aircraft carrier. 😂
- seriously a small plane would be neat, though.
Those coins came out great! That aluminum brick is HUGE! I look forward to each and every video!
My favorite movies (no, I can't pick just one): The Martian, Lord of the Rings Trilogy, Independence Day, Die Hard, Goonies, Indiana Jones (all but the third was my favorite), Serenity (from the Firefly series) and Final Fantasy VII Advent Children.
The heat not getting to 100 played havoc with my OCD...
taking out the impurities is absolutely the most satisfying part for me aside from the mold coming into form
Good vid bruv. Goonies to answer your question. It'sits literally what got me watching you in the first place. When you were using different material for "the key to one eyed willy". Thx again for the entertainment
22:31 Hmmmmm, garden-tractor for melt 🤤🤣🤣
Nah ! that would be like melting the beer fridge. Those things are definitely safe around me and the furnace👍🏻
Bro, love the "copper bones" for the "triple stones".....lol
One of my fav movies.
Also, enjoying the vids.
Yes, goonies is an absolute classic one of my top five films ever. I was eight when it came out so really stuck with me over the years and I’ll watch it at least once a year in the background, while tinkering in the shed, even if it’s only for the soundtrack or music score 👍🏻.
❤ your castings and your dogs. Enjoy a pint or two Thanks!
Hey, thanks so much I really appreciate it my friend. You are an awesome human being. Definitely will enjoy a pint or two although it cost so much at the pub nowadays I would much rather just buy the beer and come home and drink it with my boys that way I’ll get 3x more👌🏻.
I tell ya the bloody rain today has been unbelievable !!! I went to the scrapyard got myself a huge ass Motor that my friend put aside for me brought it home and in between storms. Got it off the trailer. Got it set up ready to go in the melting area then the bloody rain on off on off on off Then it’s gone back on and it stayed raining for the last probably five hours and it got dark four hours ago so I’m trapped in the shed with my beer fridge so it’s not a bad thing I suppose. Hopefully tomorrow it clears even for a little bit so I can try and break into this piece from the scrapyard🤞🏻.
Thanks again my friend have an awesome weekend 👊🏻😁.
And if I don’t get at least 20 kg of copper out of this thing, I’m gonna be very disappointed 🤔
@bigstackD Don't be disappointed if it's under 20kg ( I think you're gonna get more) but just think it's more to add to your coffers.
Sorry about all the rain but it is winter over there and here it's summer and hot and rainy from Texas to California the area that my husband and I Team drive semis. So I feel for you.
I wish I had of captured some of last nights weather it was a massive thunderstorm and I really thought it was gonna take a tree down or two on the property. Absolutely shocked that it didn’t but it was pretty awesome whether either way. I do love the wet weather it’s just a pain when you’re trying to film 👍🏻.
Favorite film is The Princess Bride!
Also another great video, m8! Thanks for keeping up with it ❤️ I’ve started my own foundry thanks to your inspiration! :)
Thank You for your Videos. 👏🏻😁👏🏻😁👏🏻😁👏🏻
Like,seeing some new metals, nice change of pace. FYI…fav movie…braveheart
Great video brother from the imperial county California 👍🇺🇲
Nice license plate. Almost as old as I am. Greetings from Alabama!
Although I love the water quench with the thermometer, Nothing compares to the after quench Ice Smash !!
From your poll, this week... Dude, there are two channels I watch religiously, every week, you and the Hoover Boys. The more videos the merrier. Love them keep them coming.
30:57 Thank you for saying TRILOGY. 4 and 5 sucked and shouldn't be counted a cannon.
🧲 i'd love to see you walk with a strong magnet in your backyard. there will be new block with that metal dust, sure😄 with love and respect from Türkiye my metalhead brother 🤘
Aluminium and copper and brass are nonferrous so magnet won't pick it up
Please send that rain to Texas! I do so enjoy watching your videos before i go to work, but then i have to wait a whole week before there is another video. I guess that means i will have to binge some of my favorite videos.. Much love from Texas!
oh a random life hack is throw a bunch of lawn moss in that barrel and it will eat all the rust. it works really well
What is lawn moss?
@@tjschwartz42it’s moss that grows on the lawn.
@@Pwills I’ve got grass, no moss.
@@tjschwartz42 good for you
Wow, the algorithm hasn't pulled up one of your videos in my feed in years!
That’s a shame , but welcome back. If you wanna hang around that would be great👊🏻😁
Favorite movie franchise for me, "Godzilla". It was 1971 or '72 and I was 5 or 6 years old and been hooked ever since 😁.
Think I have to choose between Beetlejuice or Christine as top movies 😅 Greetings from the Netherlands
Tin coins melting was very fun 😊
I’m wondering why there are two words in English for tin and what the difference is, in French there is only one 🤔
Great melt and it is interesting to see the values. Have a good one!😊
2,098 👍's up bigstackD Casting thank you for sharing 🤗
Hello again Bigstackd. It’s a bit after 5am EST 8/24/24 in Detroit, MI U.S.A. and I’m finally getting a chance to watch this vid uninterrupted. Hope you and yours are well. 🥰
Yep, all good over here just getting over a thunderstorm so hopefully it’ll clear up tomorrow and I can get started on next weeks video. Have a great weekend my friend👊🏻😁.
I love Shawshank Redemption!!!!
My favorite film? Big Trouble in Little China. John Carpenter CLASSIC.
I know that the pride you have in what you do makes it irrelevant in 99% of why the world turns, but is the value you have better than the investment? I started smelting because of your videos, and enjoy the hell out of it, but i have a long ways to go. Like most hobbies, i am not into for the money, i am just curious that way
I’m quite happy to spend five dollars in gas on a $10 bar as all these pieces are what I do on my days off from my normal full-time job and that’s why I stack it up and don’t sell it . 👊🏻 if you took into account all the gas usage I would still be way in front but if you took into account at the time I’ve spent doing all this then I’m way behind , but like I said this is a hobby I love it it’s very rewarding so I’ll keep on going for as long as my little legs carry me 👍🏻.
@@bigstackD that is pretty much what i figured. i enjoy it a lot too. thanks for getting back. keep up the amazing work!
My favorite fantasy adventure film is Conan the Barbarian with Arnold S. My favorite comedy is Ace Ventura Pet Detective. My favorite biodoc is Crumb. I could go on but as you can tell I do not pick a favorite overall... too many good ones. I will only pick favorite of a genre.
Oh my god! Is bigstackD nuts? He no nuts. He crazy!