Это видео недоступно.
Сожалеем об этом.
07.1 Implementing Failover Clustering on Windows Server 2016 (Step by Step guide)
HTML-код
- Опубликовано: 9 мар 2017
- In this video series I am going to be installing and configuring the new Windows Server 2016. In the seventh video from the series I am going to implement Failover Clustering for file services, a great feature that can make your environment highly available. It can significantly help reducing downtime for services and lowers the impact on unexpected disasters.
This is one of the best technical videos I've seen of RUclips, thank you for sharing.
For the fact that you didn't use Any third Party Tool... it's awesome!.. great videos to support 70-740 exams
Great video, Thank you!
Exactly what I was looking for :)
P.S: for people who got a bit confused like me, after 14:50 you can do it on either node 1 or node 2. You don't have to do it on both.
Haseeb are you able to help us for the clustering
@@janaybhido For sure!
@@hasharcade70 can you send your email address
Hi, Nick i have seen almost every major topic video you created to counter check on our technique and get various thing to keep for us. Thus i found your video very helpful in terms of detail explanation regarding every topic you made for those who are in the filed IT & Acting as Admin somewhere to cope at their end on a quick way. Overall provided info, clear voice and step you created relevant to topic are quite good. Keep providing more tips & tricks. Thanks
Great demo of Failover Clustering for Windows Server 2016!
Thank you Victor!
Hi Nick , I just want to say Thank you for sharing this information, I appreciate your time and effort, Greetings from Israel Brother.
Great video, Thank you! Well explained.. Hope to see more videos on more advanced setups.
Nick , You are way better than my MCSA mentor.. He didn't even teach us properly for the 740-70 until 742-70 tests..
From the bottom of my heart, I thank you and wish you the best!
Edit - A question, if I may? - Failover cluster with iSCSI means that the disk will be highly available.. if the file server is down, one of the nodes will take it's place. the point is - if the file server (NLB-STOR-01) will have downtime - the other nodes will not be able to cope... so if thats the case - how can I connect the 3 disks to all 3 computers?
Another edit - As I watching this vid again - im guessing you need the nodes as 'middleman' like in RAS gateway and RADIUS server? one is for the authentication, and one is actually the one giving the access to the internet? [here its - one server is actually storing the disks [iSCSI disks 1-3] and the nodes are for the authentication, and act as 'Access Servers']
Great video man thanks so much!
Please, can you provide us with more details about your network specially on failover cluster
I've tried this 3 times and it hasn't worked yet. I can get the iSCSI to work from the server hosting the drives but it never works from a remote server. Anyone else getting unable to connect from a remote host?
Can i use only 2 servers to make failover clustering
question: did you connect a router and changed the IP to match the router before you did a windows server 2008 / 2012 / hybrid 2016?
Thank you so much
thanks for sharing the video.. can you make video SQL
server?
kakoi horoshiy angliskya yazyk! Vse ponyatno, vse by tak, spasibo!
Hi may I know build cluster without domain possible? If create DNS server at the end need to create HA DNS server prevent down time.
i cant connect my server via vpn connection?
please i followed your instruction all
but my vpn conection from home to my server via vpn does not work
put to connect my server from home i always get this problem pls help : " THE REMOTE CONNCTION WAS NOT MADE BECAUSE THE NAME OF THE REMOTE ACCESS SERVER DID NOT RESOLVE "
Hi, I'm running windows server 2016 essential in my lab, I do not seem to have fail-over clustering available under the add roles/features, do I need windows server std or datacentre to enable the feature?
Hello, Really digging your videos...
You reference building the storage node as another video but I don't see it, which video goes over the configuration of the storage server?
Kind Regards,
If I have 2 physical servers, (server1 and server2), can I virtualise NODE 1 and NODE 2 using hper v on my second physical server(server2)? (which is just a redundancy for my physical server 1) and host the storage on server 2?
i cannot find my nodes in the discovery. it says connection failed. but i cannot ping the ip address in command prompt? did i miss any steps?
Hi there, I am not seeing iscsi disk in nodes, what to do ?
I can't find two of my servers during check name any solutions ? thanks.
@NLB Solutions can you explain how to make
active directory highly available>
nice video Sir
Can you make tutorial on implementing failover clustering on mssql server on ubuntu
I'm having udp 3343 is not reachable. How should i resolve this. Thank you.
is it possible to set ms cluster without iscsi?
Hello, do we need Windows 2016 Enterprise to setup Failover Clustering?
Hi Tommy, from Windows Server 2012 you do not have Enterprise as a version. From Windows Server 2012 you can install failover clustering on both Standard and Datacenter versions. It is the same with Windows Server 2016.
Hello, First THX A LOT for your demo - very helpful !
I have a question for you : I get vmware and 2 VM (in the same ntw and ping ok) with WinS2016 ont them. I try to "validate config" in order to create a Cluster but fails :
Browse then both objects= nodes cannot be found ! Is it because I didn't create any AD (with one DC) ? In other words, is an Active Directory (domain instead of Workgroup) mandatory to create a CLUSTER ? Regards
I have a similar setup. Dell server with VMware running and about 30 VM's. But I have a domain set up and the servers I used were part of the domain. It worked exactly like his video. So I would say that you need to have an AD domain environment going.
@@michaelfullerton3626 Yeap, I added a DC and get now a domain and it works ! Another thing : I had to declare iSCSI target with IPaddress "mode" (IQN or DNS naming does not work) ie iSCSI connect fails if IPaddress not used... THANKS for your confirmation !
So now for example start updating the NLB-STOR-01 node.... Let's see what happens on your cluster...
Yes, I am wondering too :)
Thank you
Thank you Tommy for the support!
Hi Nick
I watched now 4 of your videos and must say: Well done! I not often saw such great tutorial videos.
However in that video I have a question as at 12:55 where you are at the disc management on Node 2 you say, that you won't create volumes but bring the disk just online. But after having some trouble on 13:19 the disc were already online with the same drive leters as already allocated on node 1. So my Q ist, why was wouldn't you create volumes on node 2 first? And why were them online after refreshing the disc management console? Or did I miss something?
Many thanks and please keep going on with your videos!!!
BR Ronny
get some bitches
Failover Quaster?
Hi Fred, no no no it is failover Quackster!
Data Tree :D
omg I found myself really waiting for him to say this word.... haha it helps focus! :D
Thank you very much for such a nice video ,if you can start with action plan it will be really grateful .
Thank you Nick!!!!
Thank you for the support, James!
@@NLBSolutions Haseeb are you able to help us for the clustering
bro I've several i3 PC. can I make cluster using these pc????
can I use windows on cluster????????
pls tell..........
will it work with print server as cluster?
Hi thanks for the video,
While I`m creating the cluster, it is hangs on "forming cluster".
I`m using domain administrator to perform the operation.
I`m searching a few days for a solution.
Help anyone?
same thing happened to me. Did you find any solution for that?
Hey, i got a problem, when I am creating Cluster, my disks disappear. I don t have any available disks to add for cluster. Can u help me?
Karol Job
Check on the C: drive. When I configured clustering in 2012, it mapped it to C drive
thanks
Hi, can you also explain how to configure the node switches for iscsi, vmotion and production. Thanks
Haseeb are you able to help us for the clustering
Hi, hope you are doing well. I followed your channel and learned alot from your educational videos. I'd like to ask a query
How did you get all the server info on your desktop screen, I've been working on multiple machines and it's difficult to remember the info like ip, hostname, volume info etc.,...Appreciate your help in advance. Keep up the good work...
Haseeb are you able to help us for the clustering
Haseeb are you able to help us for the clustering
Pls create a video for multipath configuration for redundancy and better performance features. Thanks.
Hi Ravi, I will see what I can do. Thank you for your recommendation.
Hi. Can I use Windows Server 2016 Standard edition for failover clustering? Thank you.
Yes this is possible.
Mike Hortulanus Thanks
Thanks, please make some videos on Virtualization
Haseeb are you able to help us for the clustering
Hi, From which server are you running "Fail Over Cluster Manager"?
Hi Acaminero you can use all notes in the cluster to open the Cluster Manager.
anyone pass the exam? I'm finding it very difficult. lots of expertise and experience needed IMO. Trying to see a path for how to study everything is daunting and discouraging
SAME here i havent done anything related to this before and now have to create my own cluster for an exam :c
Can we use domain controller as node 1
Hi Rajeev, I do not recommend using Domain Controller as a node in Failover Cluster.
@@NLBSolutions no
Ajskozi windows server
Хули ты по русски не говоришь, слышно же что ты русский)
Hi MrJohny, I am not sure I understand you. But I am not Russian.