Ang gamit ko sa primary is 108 tapos sa secondary is 150 ok na ok sakto lng Lalo na sa city driving. Until now Yan gamit ko di pa ako Nagpalit Basta nasa timing at ok Ang timplada Ng air mixture screw at lapat Ng balbula o tinatawag na valve clearance...salamat sa panonood paps Godbless 🥰🥰🥰
Hi sir. Ask ko lang pala kung binabad niyo sa cleaner yung mga parts ng carb or ginamitan lang ng carb cleaner spray and brush. Di kasi ako sure if okay lang wag na masyadong linisin ang labas ng carb na may kaunting grasa.
Pwede nmn ibabad kabasyong actually Meron pa nga ako ginawa na pinakuluan ko para matanggal ang mga bara sa loob.pwede din ibabad sa Gasolina pero alisin mo ang mga parts na pwede masira like mga diaphragm at rubber components kabasyong para di ma misform ito then gamit ka Ng compressor para mabugahan Ng maigi ito at malinis Ng maigi.
108 primary jetting and 158 secondary jetting. City driving very fuel efficient. Proper timing valve clearance oil and belt maintenance plus carb that has that jetting it will give u a good and effecient performance.u can watch my other videos for reference to give u ideas friend...hope it helps.Thank you for watching 🥰🥰🥰
@@donbasyong i am watching ur videos dear . One more thing that i want to know about the power steering pump adopter vacuum lines where those will be fit properly
The connection of the power steering vacuum line connected to the tvsv or bi metal the upper part the lower is directly to the valve assemble,air control valve.👍
@@donbasyong look there are two hole at air control valve and there are two vacuum lines upper and lower is the rubber pipe ore vacuum line but air control valve is not clear about this at my genuine air control valve its written 0 and 1 with some other alphabets where should come number 1 and where should come number 2
This is the technique my friend the in putting or setting the steering vacuum lines the one line goes to a manifold vacuum which mean even idle your steering will receive vacuum/during idle...and the other line goes to a fortes or a bi metal vacuum line which u will have a vacuum if the car or auto reach the normal operating temperature my friend.
Sir ask ko lng po kung sumisirit ang gas sa primary pag nakamenor saan po ba ang common problem nun kasi di maganda menor at masakit sa mata ang usok salamat
Paps pag masakit sa Mata at di maganda Ang idle timing Ang problema..pero dapat Alam mo Ang e diagnose kapag ganyang di maganda idle carb o timing. Pag masakit sa Mata fuel and air mixture Ng carb or timing.
Paps slow jet wla at Yung bolitas /check ball ay may kasama na spring Yan..paki check bmga latest videos ko paps mas maunawaan mo kc masmalakas voice and we'll presented paps. Salamat paps🥰🥰🥰 I hope it helps👍👍👍
Jetting s kabasyong palit ka tapos timing sa distributor at vacuum lines dapat Wla singaw check sa mga ibang videos ko pa kabasyong para mabigyan kita o kakitaan mo Ng ideas.👍👍👍🥰
ok idol good idia
Great job 👍 continue doing d.i.y videos it could really help others 😃
nice one it helps a lot...keep it up.
thank you so much for watching my video.
nice
Boss pki lkasan konti ang boses mo d masyado marinig boss salamat..
Konti lng ang naintindihan boss
Pasensya na paps Yan Yung first time ako nagvideo pero meron din ako same video regarding sa overhaul Ng carburetor paps..check my play list paps
@@ignaciolagutin3090 oo paps kc first time ko Yan na nag blog medyo mahiyain pa pero meron ako iba pa blog about carburetor paps na ..
sir tanong lng po kung anung ideal na size ng jet? salamat po, god bless
Ang gamit ko sa primary is 108 tapos sa secondary is 150 ok na ok sakto lng Lalo na sa city driving. Until now Yan gamit ko di pa ako Nagpalit Basta nasa timing at ok Ang timplada Ng air mixture screw at lapat Ng balbula o tinatawag na valve clearance...salamat sa panonood paps Godbless 🥰🥰🥰
Hi sir. Ask ko lang pala kung binabad niyo sa cleaner yung mga parts ng carb or ginamitan lang ng carb cleaner spray and brush. Di kasi ako sure if okay lang wag na masyadong linisin ang labas ng carb na may kaunting grasa.
Pwede nmn ibabad kabasyong actually Meron pa nga ako ginawa na pinakuluan ko para matanggal ang mga bara sa loob.pwede din ibabad sa Gasolina pero alisin mo ang mga parts na pwede masira like mga diaphragm at rubber components kabasyong para di ma misform ito then gamit ka Ng compressor para mabugahan Ng maigi ito at malinis Ng maigi.
Gud pm Don Basyong...pude ba magpalinis sayo yan carburetor...
Yes paps Yan gamit ko sa 2e small body ko n corolla.taga saan po ba kayo paps? PANGASINAN ako paps...
Thanks for nthe videos i want to know by 104 primary and 150 secondary jets what average your getting in city and at highway ?
108 primary jetting and 158 secondary jetting. City driving very fuel efficient. Proper timing valve clearance oil and belt maintenance plus carb that has that jetting it will give u a good and effecient performance.u can watch my other videos for reference to give u ideas friend...hope it helps.Thank you for watching 🥰🥰🥰
@@donbasyong i am watching ur videos dear . One more thing that i want to know about the power steering pump adopter vacuum lines where those will be fit properly
The connection of the power steering vacuum line connected to the tvsv or bi metal the upper part the lower is directly to the valve assemble,air control valve.👍
@@donbasyong look there are two hole at air control valve and there are two vacuum lines upper and lower is the rubber pipe ore vacuum line but air control valve is not clear about this at my genuine air control valve its written 0 and 1 with some other alphabets where should come number 1 and where should come number 2
This is the technique my friend the in putting or setting the steering vacuum lines the one line goes to a manifold vacuum which mean even idle your steering will receive vacuum/during idle...and the other line goes to a fortes or a bi metal vacuum line which u will have a vacuum if the car or auto reach the normal operating temperature my friend.
Sir ask ko lng po kung sumisirit ang gas sa primary pag nakamenor saan po ba ang common problem nun kasi di maganda menor at masakit sa mata ang usok salamat
Paps pag masakit sa Mata at di maganda Ang idle timing Ang problema..pero dapat Alam mo Ang e diagnose kapag ganyang di maganda idle carb o timing. Pag masakit sa Mata fuel and air mixture Ng carb or timing.
Boss pwde po b ung jettings s repair kit na nabibili 104/153? Ano po suggestions nyo boss? Maraming salamat po..
Ok na ok Yan paps pang daily or city drive pwede Basta wag mo lang sakalin Ang slow jets mo paps..thank you for watching Godbless 🥰🥰🥰
@@donbasyong thank u boss.. ✌️👍
Pangalawa ko po tanong ung slow jet may o-ring po ba yun o wala tska po yung bearing n maliit may kasama ba yun n spring o wala?
Paps slow jet wla at Yung bolitas /check ball ay may kasama na spring Yan..paki check bmga latest videos ko paps mas maunawaan mo kc masmalakas voice and we'll presented paps. Salamat paps🥰🥰🥰 I hope it helps👍👍👍
Sir 2e ung carb Toyota corolla pwedi bah I kabit ang carb ng 4k?
Pwede paps pero eto tips ko sa iyo paps mas matipid Ang stock na 2e kaysa sa 4k na brand-new/stock carburetor..
Anu po maganda repairkit?n brand
Keyster paps
Boss ano sukat ng gap dun sa gas floater pin at sa bakal ng floater?
Paps .009 sa pin Ng fuel piston sa bakal Ng floater
Watch mo mga latest videos ko paps mas klaro 👍👍👍
salamat boss
Boss anong puedeng gawin pagmalakas kain ng gas?pinagawa ko n Yung carb, ganun parin
Jetting s kabasyong palit ka tapos timing sa distributor at vacuum lines dapat Wla singaw check sa mga ibang videos ko pa kabasyong para mabigyan kita o kakitaan mo Ng ideas.👍👍👍🥰
Wala mahina audio po...
Yan Yung unang unang blog ko paps hayaan mo gagawa ako Ng mas malinaw na audio video Ng carburator overhauling🥰