Highly highly recommend one! I have the 200DS and the 50DS- in .357mag. The 200DS has the perfect heft to it and has unbelievable reduced kick for a .357 Mag out of a 2" barrel.
@@wehrewulf its still a unique design problem that puts something dangerous closer to the operator's hands, a problem you'll never have with a glock 19 like everyone else carries.
I just bought the 3" shown. Mine has a totally different pattern on the grip. It's G10, it's white with deep gray color and has the Chiappa logo, but the pattern looks like the lines of a cut tree. I called Chiappa and ask if there was an early and late release of is model. The answer was a resounding no followed by the dealer must have changed the grip. Any thoughts???
@2:24 the spokesman for "chiappa" finally said"chiappa" while the other guy kept say chee op ah ! .. was waiting for the spokesman to say it cause I've always wondered how it's pronounced
They made very few. I personally finally found one. Only other one I’ve seen is still currently on North Fl Gun Trader but it’s chambered in 9mm. IF your still looking. :)
@@greenlawnfarm5827 I believe you can find videos of italians pronouncing it, even italian spokepersons of Chiappa Firearms itself. To us italians it sounds funny ofc that it would be pronounced "CHEE-uh-pa" or "KEE-uh-pa" or smth...
@@greenlawnfarm5827 it's difficult to reproduce it without using IPA, in a british spelling it would be something like "KYUP-puh" but you don't share our same vowel, that "a" is perhaps similar to certain american "o" like in "got" or "god"
They need to get wise and make that 3-inch model a standard model without the expensive hideous lasered on paint job. 3" is far better than 2 for magnum power, the sight radius is better for accurate shooting, but the length isn't so long that it's uncomfortable in a concealment holster. The fiber optic sights are perfect. I've shot a 2 inch model, it's a pussy cat even with full blast magnums that normally sting even in a heavier gun, but the 2 inch model doesn't give you enough sight radius or bullet performance for a good balance of effective defense and concealment. put this out in a standard, more affordable package (not limited edition) and I'll replace my gp100 with it, especially if it's moon-clip ready. hell, I'll take it in 10mm if the frame can handle it... that's such a versatile round and it burns better in shorter barrels than .357, which really doesn't start to shine till you've got more pipe. 357 still might be better though cause of how affordable GOOD ammo is, and cheap 38s for plinking.
i got a large 686 (8-3/8) i guess i could dabble in the dinky with a 3, my dad made me a lover of stainless. i do have a couple of ceracote pistols that i like, it's great to be in America with Trump as Pres in '17!
I'm not usually the biggest fan of revolvers, but I have to say I'm a fan of the Rhinos. I get a real sci-fi, sort of blade runner vibe from them
Also in The Expanse.
griffin t, maybe minus the Sci-fi Blade Runner stuff. But this is a good revolver I admire very much too.
Also in Ghost In The Shell and Altered Carbon.
I purchased the 30DS and absolutely love it. Will probably purchase the Charging Rhino to play with.
These guns are beautiful, I want one so bad.
zxzrp0 The standard rhinos are beautiful. except the 200ds. Looks like a little chode gun
Highly highly recommend one! I have the 200DS and the 50DS- in .357mag. The 200DS has the perfect heft to it and has unbelievable reduced kick for a .357 Mag out of a 2" barrel.
A wheel gun like an outer space cowboy. Love it.
Matt was very polite not to correct his pronunciation of Chiappa. I would have not been.
I know, right? He looks like he wants to correct him SO badly too.
finally! a 3 inch! Got me a 6ds but that 3 inch would be perfect for carry.
I said I'd never carry a revolver but that white rhino sure makes it tempting lol. I just can't get past carrying and reloading with speed loaders.
If your reloading in a situation you missed your target 6 times ALREADY--------Just retreat to a tactical location the police department!
It's going to take more then 6 rounds to get to that police department or even your car for that matter
That's gungasmic.
to each his/her own. but hey, I'm glad there's still a market for revolvers in this age.
Hahaha he was saying chi-appa when it is said Kiappa
Even after he heard the rep pronounce it differently, he still mispronounced it.
I hate it so much. It's incredibly annoying.
I like the 3 inch barrel, but I'll take mine in black thank you.
Sales homie wasn't too happy to get called out on factory slicked up especially at the very end
Wow what a beauty!
Yea i am i'm not a fan of revolvers
Dude shut the fuck up. If you don't like the gun, fine, but don't piss on others who don't agree with you
Lol, HELL NO. If I wanted to support a cheating cunt I would still be married
They should have called it the albino rhino.
Or the "thumb blaster" since it puts the discharge right where you hold.
@@BoopSnoot Shouldn't run thumbs forward on a revolver anyway.
@@wehrewulf its still a unique design problem that puts something dangerous closer to the operator's hands, a problem you'll never have with a glock 19 like everyone else carries.
I just bought the 3" shown. Mine has a totally different pattern on the grip. It's G10, it's white with deep gray color and has the Chiappa logo, but the pattern looks like the lines of a cut tree. I called Chiappa and ask if there was an early and late release of is model. The answer was a resounding no followed by the dealer must have changed the grip. Any thoughts???
That you shoudl ask your dealer about it.. because that is squiffy as hell
@2:24 the spokesman for "chiappa" finally said"chiappa" while the other guy kept say chee op ah ! .. was waiting for the spokesman to say it cause I've always wondered how it's pronounced
Where can I buy that white one? Please I am ready to buy and have a store to send it to
They made very few. I personally finally found one. Only other one I’ve seen is still currently on North Fl Gun Trader but it’s chambered in 9mm. IF your still looking. :)
that charging rhino look sick as fuck!
I want the Rhino in 44 Mag. The' Wooly Rhino!'
That would look sick in a non-competition situation, probably scare attackers off by just the shape of it. Would not mind carrying one around.
Love my White Rhino 💖
I want the Charging Rhino!
"Key-appa"
Right. I will now not believe anything anyone says in a video of these guns if they cant do some research and learn how to say the name right.
Not even. It's KYUP-pah.
@@greenlawnfarm5827 I believe you can find videos of italians pronouncing it, even italian spokepersons of Chiappa Firearms itself. To us italians it sounds funny ofc that it would be pronounced "CHEE-uh-pa" or "KEE-uh-pa" or smth...
@@edraith How do you say it?
@@greenlawnfarm5827 it's difficult to reproduce it without using IPA, in a british spelling it would be something like "KYUP-puh" but you don't share our same vowel, that "a" is perhaps similar to certain american "o" like in "got" or "god"
whens the white rhino available for purchase
they have a suppliers in the Philippines now?
I agree
Nice!!!
Fuck that is beautiful!
ライノかっこよすぎる
I want to buy 2 but the link doesn't work on any of my devices
Damn, that's a sexy gun...
Mantap bro..
What caliber?
almost looks like the gun of Vash The Stampede
get the chyapuh!!!
bottom barrel? Reminds me of trigun... i want one.
I want that white rhino in a 60ds
I wish I could own one
looks just like The Last Word and First Curse from Destiny
Erik Keeter fuck yea!!!
They need to get wise and make that 3-inch model a standard model without the expensive hideous lasered on paint job. 3" is far better than 2 for magnum power, the sight radius is better for accurate shooting, but the length isn't so long that it's uncomfortable in a concealment holster. The fiber optic sights are perfect. I've shot a 2 inch model, it's a pussy cat even with full blast magnums that normally sting even in a heavier gun, but the 2 inch model doesn't give you enough sight radius or bullet performance for a good balance of effective defense and concealment.
put this out in a standard, more affordable package (not limited edition) and I'll replace my gp100 with it, especially if it's moon-clip ready. hell, I'll take it in 10mm if the frame can handle it... that's such a versatile round and it burns better in shorter barrels than .357, which really doesn't start to shine till you've got more pipe. 357 still might be better though cause of how affordable GOOD ammo is, and cheap 38s for plinking.
Dude said "more better"
I want one in a twelve shot .22 magnum
Also this is Harley Quinn's gun from suicide squad custom color design tho
lindo!
Pronounced .... key-appa. Like Chianti wine.
White rhino looks ugly as hell. Hope they make it in black or stainless
should be .44 magnum
They have a 44 mag!
@@michaelsmith9308 in what size?
Where is the harley quinn edition 60ds?
"for competition" but in uspsa it would not be competitive at all and in idpa it would be too long to conform to the rules
Tommy likey
Is he saying "Gat Zone?"
I heard Get Zone.
I'd love a Charging Rhino, IF IT DIDN'T say Charging Rhino on it in huge letters. Come on guys smarten up. Who would want that.
i got a large 686 (8-3/8) i guess i could dabble in the dinky with a 3, my dad made me a lover of stainless. i do have a couple of ceracote pistols that i like, it's great to be in America with Trump as Pres in '17!
I liek the charging rhino.. Except.. that big name across the firearm.. Kinda yuck..
I want a 3inch.. but I really dislike the white Rhino look.
first! ig: legalizeranchbrotendo