Franklin BBQ Pits - How Our Pits are designed and why

Поделиться
HTML-код
  • Опубликовано: 22 дек 2024

Комментарии • 436

  • @brewster84067
    @brewster84067 Год назад +38

    You know what I like most about this video? The excitement Aaron has when walking through every intricate detail of the design. This is clearly a culmination of years of experimentation, successes and failures, and thousands of cooks. He is a true expert, and has such a sincere passion for his craft. Thank you Aaron for sharing this!

    • @lancebradley1344
      @lancebradley1344 7 месяцев назад +1

      Here, here! American made, old school conservative design mind set, modern fluid dynamics design techniques, and the attention to detail. Very cool, hope you do well. Would love to enjoy one. I’m an old country boy, blue collar. Therefore, I’m working on my first design and I’m studying airflow. I prefer a vertical grill / smoker. 24”diameter, 380 in^2 surface. Will need great seal for 225 - 750 range. Just a family, few friends, type grill. Maybe another design thought for you. Anyway, would certainly appreciate any advice.

  • @allenfischer5878
    @allenfischer5878 Месяц назад +2

    Gotta love those real craftsmen! Nice job Mr. Franklin.

  • @Jonbob836
    @Jonbob836 Год назад +69

    you can really sense the passion and knowledge he exudes

    • @steveludwig4200
      @steveludwig4200 Год назад +2

      And the desire to overcharge for his pits. They are priced like Jambos.

    • @CoolArrrow
      @CoolArrrow Год назад

      He forgot to mention the turbo encabulator

  • @sirtango1
    @sirtango1 Год назад +8

    You’ve worked in or around the oil and gas industry, haven’t you? The reason I ask is you’re using terms that only people intimate with the materials and industries would use and understand. I retired from the industry. Very nice smoker. I’ve cranked out a lot of Q on an offset. But my demands quickly outgrew the multiple offset smokers that I was using. So I built a large reverse flow water bath smoker. I built a tandem axle trailer for it. After using at least two 7018’s and 6010’s doing a tweak or two, I’m finally happy with the way it cooks. I can tune my hot / cold spots via tuners, depending on what I’m cooking and my needs at the time. Most people don’t realize how much work goes into a high quality pit!

  • @northernnomad9046
    @northernnomad9046 Год назад +7

    Aaron Franklin is a multi trade wealth of knowledge. Rarely can person encapsulate an entire cuisine with such charisma and ‘frankly’ - swagger. As a multi cuisine cook and former chef that has become a fairly decent hobby welder and de facto historian of cuisine origins, WELL DONE🙌🏽

  • @jeffreytaylor6257
    @jeffreytaylor6257 10 месяцев назад +4

    This video reminds me of watching Paul Reed Smith talk about building his guitars.
    You both build brilliantly functional works of art.
    You are in good company.
    JT

  • @alveus8205
    @alveus8205 Год назад +35

    Looks amazing. I really appreciate all the thought that went into this pit and it’s quality. Up here in Canada, they run for $8000. I do not dispute the pricing, but it’s out of my budget. But I would definitely love one.

    • @DavidJohnson-tv2nn
      @DavidJohnson-tv2nn Год назад +5

      And there's only a couple hundred dollars worth of steel in it! Way overpriced in my opinion.

    • @PTownFitteds
      @PTownFitteds Год назад +5

      @@DavidJohnson-tv2nn you have zero idea what you’re talking about. This thing could take a 7.62 and not even make a dent. THOUSAND of dollars in steel alone.

    • @DavidJohnson-tv2nn
      @DavidJohnson-tv2nn Год назад +1

      @@PTownFitteds BS!

    • @yessir0503
      @yessir0503 Год назад

      ​@@PTownFittedsi can build an inch thick of this with 1/4 the price . Can take even a rocket launcher

    • @zoobee4824
      @zoobee4824 Год назад

      @@yessir0503 Then go do it and gtf out of here, sell it for less, I dare ya

  • @sbodi4d
    @sbodi4d Год назад +4

    You are a true Texas legend!

  • @BBQWithBoterman
    @BBQWithBoterman Год назад +49

    They are no joke! Cooked on one for the first time a couple weeks ago. It really is designed for great brisket!

    • @markwilson9652
      @markwilson9652 Год назад +1

      What about ribs and pork belly?

    • @RovingPunster
      @RovingPunster Год назад +2

      ​@@markwilson9652All those cuts cook in pretty much the same temp range, so Im not sure I understand your question.

  • @robvalero4453
    @robvalero4453 Год назад +13

    I have wanted to learn bbq for years and watching Franklin's bbq videos have definitely giving me inspiration to strive on cooking the best bbq I can. Truly the best pit design and quality, I've got to order me this.

    • @markwilson9652
      @markwilson9652 Год назад +3

      Master the fire and you will master the pit.

  • @IanB22
    @IanB22 3 месяца назад +1

    The passion and knowledge of WHY is amazing in this video.... SO GOOD

  • @JLEMS
    @JLEMS Год назад +6

    I love the location of the drain. This is where it would make sense to be, and I’ve always disliked my pits’ locations at the other end. When the pit is level, or favoring the stack high, this is where the grease goes, right toward the fire. Nicely thought out AF!

  • @bill40409
    @bill40409 10 месяцев назад +2

    That's a great looking, well thought-out pit! Definitely on my 'must-have' list, just as soon as I win the lottery.

    • @tubetime39
      @tubetime39 9 месяцев назад

      bill40409; Bad credit ? jk

  • @anthonypinto1366
    @anthonypinto1366 Год назад +13

    Incredible! Perfectionist with passion = outstanding results. Bucket list includes a trip to Austin to taste the Franklin experience and then the ultimate- bringing one of these back to NJ to elevate my game. Love what you do Aaron! Thank you!

  • @usa91787
    @usa91787 11 месяцев назад +3

    Dang, that's nice. Love the water pan spot and the slots in the fire box.
    I get that its a lot of money for a smoker but the design is fantastic.
    In 1993 I bought a Lyfetyme grill - they're from Uvalde, TX - at the Minnesota State Fair. It's a 20" grill not a smoker. But it's made just like this. Very thick steel.
    I still have it. Best $360 I've spent. My son will be able to give it to his kids.
    I've also got 2 Pit Barrel cookers. $350 each. Those things can cook. If the food comes out bad it's my fault not the cooker.
    Now, I've added another smoker - another Lyfetyme that I got from a buddy of mine. This one is about 25 years old. I have to do some slight fix up to the interior but it's still in great shape. Got it for free.
    Should be able to do 3 briskets in it or several racks of ribs.

  • @wpittock
    @wpittock Год назад +2

    I am putting mine into use in the next couple weeks, ready for Thanksgiving. I've been waiting a while to get a concrete pad poured to give it a good home - and that's all done now. Excited!

  • @gregmacd2829
    @gregmacd2829 Год назад +6

    "Geographical center of a Brisket" that is awesome, made me chuckle a bit, Aaron is the mad scientist of BBQ, these pits are expensive, but will be the last one you (and your kids) will every buy...nice job.

    • @coreytohme9861
      @coreytohme9861 Год назад

      Nah, Jeremy Yoder is the Mad Scientist of BBQ.

  • @theanthonyv
    @theanthonyv Год назад +15

    I have one of the earliest Franklin pits. They’re legit. Incredible craftsmanship. So solid. Elegant design, with everything you need but no unnecessary elements. And it’s like a piece of industrial art rather than an eyesore. Lots of other great pits can smoke excellent bbq. But IMO, none of them look as good as this one.

  • @joshadsett4835
    @joshadsett4835 Год назад +1

    i love how much this guy loves his product. Good old America

    • @carpy1970
      @carpy1970 9 месяцев назад

      It’s easy to love your product when you’re charging that much for it……

  • @BrisketMedic
    @BrisketMedic Год назад +9

    Great information and lots of study went into this. Makes someone appreciate the work of art more!

  • @sengaleng
    @sengaleng Год назад +6

    Love it!!! Want it! Missed details about the grill grates and grease drain, though. Awesome Pit

  • @johncox9868
    @johncox9868 6 месяцев назад

    My neighbor has a smoker in this style and I've noticed a lot of issues with it. You've addressed every problem I've seen with this style of smoker. Seriously this is a really well thought out design.

  • @brianbenedict8374
    @brianbenedict8374 Год назад +5

    I still liked it when you would drive down the back roads,and find one of those big tanks. Take it home and start to make your BBQ pit. Loved those vids and the new ones coming out soon!!!

    • @gosman949
      @gosman949 Год назад +1

      those pits sucked pretty much!

  • @dbrackman1
    @dbrackman1 Год назад +7

    Best offset money can buy. When your fire is balanced it almost vibrates like a fan is running. The weight helps hold the heat so it’s forgiving if you aren’t sitting there watching each moment. Buy yours and never look back and give it to your grandkids.

  • @j3rocketeer
    @j3rocketeer Год назад +8

    Mr. Franklin. You really know your stuff and are passionate about it. Thank you for what you do.

  • @mrjoshers79
    @mrjoshers79 5 месяцев назад +2

    Great quality. Get what you pay for! I dont dispute the price but its far out of reach for the everyday consumer. Not for middle class. But hats off for building a legit product!

  • @bobgruner
    @bobgruner Год назад +3

    What a nerd! (in the best, best way☺- thank you for your attention to detail. I learned a lot just from watching this.)

  • @wilkiesbbqnc
    @wilkiesbbqnc Год назад +2

    I sure am glad you’re active on your channel again keep it up Gods speed.😊

  • @X3WorkshopDesigns
    @X3WorkshopDesigns Год назад +4

    A master at work and an artist. Awesome craftsmanship. Thank you for sharing.

  • @reset-xs9ql
    @reset-xs9ql Год назад

    "it's all about the details. they matter." looks great. cooks great.

  • @setituptoblowitup
    @setituptoblowitup Год назад +1

    Fluid dynamics have never been so delicious🔥💨😋🍻

  • @johnwooldridge1860
    @johnwooldridge1860 Год назад +1

    I love this pit. it sets so much higher than any other pit. Aaron did his home work.

  • @rodpilcher2804
    @rodpilcher2804 Год назад +2

    Fantastic! I finally used the chili in adobo last year in my chili... gonna try without the habanero this year (maybe the wife will not complain about too much heat) love the addition of cinnamon and chocolate.. even a bit of honey sounds intriguing. Can't wait to try this recipe.. love the cheese and SC addition.. Thanks for the content. I appreciate you, man!

  • @michaelholmes8350
    @michaelholmes8350 Год назад +1

    Being a union pipe fabricator and welder in Houston for 40 years, I'm impressed with your work. I know what it takes to build this. Im retired now and if I could afford it, I would certainly buy one Franklin. I enjoy all of your videos👍😎

  • @vitaly6312
    @vitaly6312 Год назад +2

    Been to Franklin BBQ and had the best RIBS of my life there. Yes, the brisket is out of this world and also the best I’ve had, which was probably the expectation? The ribs are what broke me though. And I live in a part of the country KNOWN for ribs specifically.
    All that being said, this thing is killer. I do wish though for $5500 you’d get a little swing up tabletop to do your work on in front of the grill. I understand the reason to omit it, but also would be a super nice addition where you can set and stage your meats before placing them into the pit.

    • @tubetime39
      @tubetime39 9 месяцев назад

      vitaly6312; I'm brand new but like your idea. Maybe a removeable table set up ? Hooks on , stores hooked on back maybe ?

  • @bpp325
    @bpp325 Год назад

    Smoked my first Boston butt years ago following Aaron's video. He made it easy and it tasted GREAT. 👍👍

  • @jordanbabcock9349
    @jordanbabcock9349 10 месяцев назад +1

    I don't doubt the quality of smokers or BBQ Franklin produces but one thing is obvious - his greatest asset is his ability to sell. This guy is a straight up salesman. (Not saying he isn't passionate or authentic)

    • @davidnettleton3375
      @davidnettleton3375 7 месяцев назад

      Nothing sells better than authenticity and knowing that your product is the best. It's what you call a natural salesperson. No effort involved. Just telling it like it is.

    • @Hvacmike
      @Hvacmike 2 месяца назад

      When it’s something you love and believe in, it’s less sales and more sharing something you know others will enjoy.

  • @allanbrand
    @allanbrand Год назад +2

    Awesome job man, awesome job! I wish RUclips would let us double like videos!!

  • @AhmedAli-rg3hp
    @AhmedAli-rg3hp 11 месяцев назад

    I really enjoyed this video! Lots of great points (many I needed to hear and be reminded of again). I appreciated your openness

  • @nateferguson4612
    @nateferguson4612 Год назад +1

    So good! Fantastic details and very glad you took us into all the specs of, and reasons behind, what is a great smoker.

  • @supersteven3434
    @supersteven3434 Год назад +8

    😁 great video. The love and passion Aaron has for barbq really shines. 😁

  • @ronmcc100
    @ronmcc100 Год назад +6

    WOW! VERY IMPRESSIVE! Wish you had these around in years past, my big BBQ days are behind me, but if I'm ever in the market for a new cooker, this would be my first pick! I've learned and improved so much of my Q from you and your videos. Keep up the great work!

  • @TheAmishElectrican
    @TheAmishElectrican Год назад +2

    YaY our Bi-yearly Franklin video 🥳 🎉

  • @clyde8drive
    @clyde8drive Год назад +2

    Solid and best on market. 5K is not in my budget but I believe its worth every penny.
    "Built like a little Maserati" and priced like one. You get what you pay for, so save up.

  • @zulucharlie5244
    @zulucharlie5244 Год назад +4

    It is a beautiful, heirloom-quality smoker, and I love, love, love that it's designed and built in Texas.

  • @kevinbourbon572
    @kevinbourbon572 Год назад

    I love my Franklin Pit! A labor of love

  • @mucccvhorob4596
    @mucccvhorob4596 Год назад +3

    I was always told the air dampner is for times when wind is blowing into the vent. Pretty sure its a necessary to have one. It definitely is where i live.

  • @PerthLuxury
    @PerthLuxury Год назад +2

    So Aaron, When's the Franklin Pellet Smoker coming out?

  • @darrylsmith9104
    @darrylsmith9104 9 месяцев назад +3

    Dude naturally and effortlessly sells truth because he obviously and nakedly loves every detail regarding what he does. Makes it easy to believe in him and anything he produces.

  • @HectorGarcia-nm1pd
    @HectorGarcia-nm1pd Год назад

    Great job on the pit👍
    Now for me to finish my pit i needed more ideas thank you.

  • @davewilson1965
    @davewilson1965 Месяц назад

    I've read all of your books and love them. I noticed when you were cooking 3 briskets you put a pice of wood next to the water pan. Is it better to do that for every cook or just when you are cooking 3 briskets at a time?

  • @Regg363
    @Regg363 Год назад

    My 250 gallon stick burner, had the stack at same height as rack. Heat would come in at one end rising to top of meat compartment then going right out the stack. I came off stack on inside, ran pipe to bottom of meat chamber to 2/3 the distance to firebox. The heat now circulates to top of meat chamber and the cooler air drops to the bottom and out the stack. The air in the top where the meat is, is always hot. The firebox air inlet comes in under the coals and wood. So air goes up through the fire to keep coals red hot. I’ve BBQed for 45 yrs, this is the most efficient and controllable pit I’ve ever had. I use combination wood chunks and wood, after an hr or so of wood. I’ll put a shovel of coals every 1 1/2 hrs.

  • @timgregson5533
    @timgregson5533 Год назад +8

    Heck, I'm sold! Now if I can only find $6000.

  • @BigReggie
    @BigReggie Год назад +7

    Love Franklin and I know he's a pitmaster but at almost 6 grand for one of these, I'll stick to my pit barrel cooker. It turns out absolutely delicious barbecue.

    • @nhhbbyloggr5022
      @nhhbbyloggr5022 Год назад +1

      Having fabricated two similar stove to these I can tell you it's worth every penny in materials and labor and still make a small profit. That said, anything cooked with wood is better than all other fuels.

    • @BigReggie
      @BigReggie Год назад +10

      @@nhhbbyloggr5022 I've been welding for 30 years. I will respectfully disagree that it's worth $6000

    • @nhhbbyloggr5022
      @nhhbbyloggr5022 Год назад

      @@BigReggie I can't afford a Cadillac either, when all I need is 4 wheels to get me there. The " brand" sets it up a few notches, for sure.

    • @Patrick94GSR
      @Patrick94GSR Год назад +1

      @@BigReggiethem build one with all this attention to detail and you’ll see why it costs that much.

    • @matthew7469
      @matthew7469 Год назад

      Completely agree about the price! Especially when you can get a Workhorse for nearly half.

  • @hawkeyeted
    @hawkeyeted Год назад

    I love watching Aaron talk about his craft. 🙃🙃

  • @uriel-heavensguardian8949
    @uriel-heavensguardian8949 Год назад +1

    That thing is a BEAST!!!!

    • @matthew7469
      @matthew7469 Год назад +1

      Have you heard of Workhorse? This pit is a child's toy compared to a 1975. Check them out! better pits and way better price.

    • @uriel-heavensguardian8949
      @uriel-heavensguardian8949 Год назад +2

      @@matthew7469 ok! Thanks! I’ve heard of them.

  • @jp21124
    @jp21124 Год назад +1

    Nice! Wouldn't you want a raised cover for the smokestack to stop rain from getting in the tube and rusting though?

    • @brucegolub9627
      @brucegolub9627 Год назад

      that's what BBQ Sheds are for...besides, unless its torrential, doubt you'd get too much water in there. when not in use, find a pan to fit over it.

    • @jp21124
      @jp21124 Год назад

      @@brucegolub9627 For over 4k for a pit, I feel like I shouldn’t have to find anything but the meat. Just sayin…

  • @chefblair63
    @chefblair63 3 месяца назад

    Engineered from a pit master’s experience. Very nice. Just watched this after the video where you salvaged a 250 gallon propane tank.
    So what came first, the pit or the pit master?

  • @chrissewell1608
    @chrissewell1608 25 дней назад

    Aaron certainly knows his metal working. I still want a shelf on front of the door to set my pans, thermometers, and beer on! And maybe one on top of the fire box to keep covered pans of food warm!

  • @cmcdonald9896
    @cmcdonald9896 5 месяцев назад

    If I was building a custom car I would want this guy to build it. His attention to detail all the way down to putting the thermometer 2” about the grate because the average brisket is 4” tall is masterful. Port and polished offset smoker? Sombtch im in!!!!

  • @nordicwilly6650
    @nordicwilly6650 Год назад

    Masterclass in pit design!

  • @nhhbbyloggr5022
    @nhhbbyloggr5022 Год назад +1

    Thank you for the show. Beautiful and functional.

  • @anttiarokoski6255
    @anttiarokoski6255 Год назад +1

    Such a sweet burner! Would not mind a test run dxD Franklin for ever!

  • @markwilson9652
    @markwilson9652 Год назад

    Beautiful pit hands down

  • @triumphrider9396
    @triumphrider9396 Год назад

    Great design. I wonder though if that firebox design would be tough to clean out?

  • @GoatRoper911
    @GoatRoper911 Год назад +2

    Looks good, can you weld a griddle on the firebox or will it not get hot with the double wall design?

    • @davidnettleton3375
      @davidnettleton3375 7 месяцев назад

      I was thinking that too. Not necessarily a griddle, but even just a flat surface to heat up a pan of beans or a cast iron skillet. I wondered when he said "insulated" if it's not going to put off enough heat at that point to cook with.

  • @lachlanmaple4868
    @lachlanmaple4868 Год назад +1

    Could you ship one to Australia or would it cost too much? I imagine those things are pretty heavy - how much do they weigh?

  • @blainemitchell
    @blainemitchell Год назад

    How do they smoke in cold weather? I live in Minnesota, and I currently own the Char-griller XL smoker, but the metal is not thick enough for cold weather cooking. I have to put a blanket on it and it will cook but it takes a long time. Plus, holding the temp is very difficult.

  • @wesleyrabb6182
    @wesleyrabb6182 Год назад +1

    I have one question. If you don't have a damper on the door, how do you control the temperature?

    • @TaterNater90
      @TaterNater90 Год назад

      Size of wood pieces and how many. I never mess with my damper on the firebox or chimney, they’re always wide open

  • @maxnine57
    @maxnine57 Год назад +1

    This is fantastic great design wow!

  • @pete91671
    @pete91671 Год назад +1

    Great design

  • @insidiousengineering
    @insidiousengineering Год назад +2

    In a world of BBQ barges and hulking SUV's this pit is like the little Italian roadster. Finely tuned, a joy to "drive" little convert able sports car.

  • @Blackheart7-5
    @Blackheart7-5 Год назад

    VERY nice!!!! Quality looks amazing.

  • @phillipbonner5215
    @phillipbonner5215 Год назад +1

    That's awesome congratulations on your efforts.

  • @RICO-BugkillerFPV
    @RICO-BugkillerFPV Год назад +1

    Congratulations 🎉
    Like having a commercial smoker for my home! Mouth-watering watching the video. Take my money!!!

  • @rockkhound943
    @rockkhound943 Год назад

    Ill have to go for the ole propane tank unit for now an save up fur this high rent unit but i love its design.

  • @andyfrieden4079
    @andyfrieden4079 Год назад

    I am 8:57 in and he has not mentioned anything about the underside of the grate and that specific air flow>>>??? 🤔🤔🤔

  • @williammiller5449
    @williammiller5449 Год назад

    Does the pit have grease/condensation drain holes? Also, does it come with a rain cover for the smokestack?

  • @danielmargolis3210
    @danielmargolis3210 Год назад +1

    Beautiful work.

  • @BottledCourage
    @BottledCourage Год назад +4

    I was all about it and then I saw the price 😂 no disrespect, well earned and looks extremely well built. maybe one day I’ll get one!

    • @matthew7469
      @matthew7469 Год назад

      that price is pretty discouraging when you can get a Workhorse for far less that is arguably better built. I've been lucky enough to handle them side by side and there is no comparison.

  • @lllill
    @lllill Год назад

    @BBQwithFranklin Is there anything you'd change in future builds from this existing one?

  • @TheDarienJim
    @TheDarienJim Год назад

    Great review. I’ve been thinking of graduating from my Traeger Pellet and Big Green Egg to an offset, but what scares me is the ability to maintain temperatures for long periods of time, say on overnight cooks. How long can a typical Franklin offset hold a temperature without new wood? I’ve become accustomed to using blowers like FlameBoss on the BGE or just loading up the hopper on the Traeger and going to bed at night sleeping soundly knowing nothing would go wrong. With an offset am I getting up every 1-2 hours for fire management???? Lastly, researching some other offsets I noticed they have adjustable dampers on their stacks but yours does not. Any thoughts on that detail?

  • @waynehollen1300
    @waynehollen1300 Год назад

    I would love to purchase one ! My Father passed away in 2016, took my cooking after him and his name is Franklin. He also designed a rotisserie for his church from a bed of a pick up truck in San Diego

  • @dalegriffiths335
    @dalegriffiths335 Год назад

    I love mine , best purchase ever !!!

  • @charlesherrera6535
    @charlesherrera6535 Год назад

    I love my Franklin smoker! Works great!

  • @adamc585
    @adamc585 Год назад

    Truth be told Aaron Franklin can talk.

  • @dccreations1361
    @dccreations1361 5 месяцев назад

    This is such an amazing video, thank you so much!

  • @RovingPunster
    @RovingPunster Год назад +1

    Awesome looking design, and astutely explained.
    QUESTIONs:
    1) what does it weigh ?
    2) is there a way to throttle the airflow to finesse the temp, and to maybe even choke it off to save fuel if cooking finishes before the fire burns out (ie, intake shutter and exhaust dampers) ? That's a key difference between pro users (who cook all day long), and smaller households who only need to cook in a single pass for a family of say 2-6 ppl. If youre gonna sell to the latter, the ability to conserve/reuse partially spent coals could be practical and a good selling point.
    3) Given that the rear (firebox) wheels are fixed, im surprised you didnt add an extra handle at the base of the chimney, to help wheel the smoker in and out of wherever people store it ... and maybe a telescoping chimney to help get it in & out of a garage). Pros may not need to move them often, but residential users often do.
    4) What's the typical temp range it maintains most comfortably ?
    +1 and respect. 😊👍😂

  • @LP23D6
    @LP23D6 Год назад

    Built like a brick outhouse! Dang nicely done.

  • @cocohall16
    @cocohall16 Год назад

    Do you have replacement parts available when needed? Any extended service contracts?

  • @se7002t
    @se7002t 11 месяцев назад +1

    Can someone explain to me what Franklin means when he explains why the thermometer needs to be loose?

  • @davidnettleton3375
    @davidnettleton3375 7 месяцев назад

    Without air dampers on the firebox, how do you raise or lower the temperature?

  • @ryanmarshall8758
    @ryanmarshall8758 Год назад

    Hey man, great videos, doesnt look like you respond much here, but here goes. Ive built maybe a dozen wood fired bbq's, and was wondering.... Why dont you use reverse flow, or make them convertible between crossflow and reverse? This is just what ive settled on as my favorite design, genuinely curious, not criticizing.

  • @bulldaagg
    @bulldaagg Год назад +1

    looks awesome, i want one

  • @ronniecoleman3365
    @ronniecoleman3365 Год назад

    I'm going to buy one when I can afford it love the pit

  • @striker3212
    @striker3212 Год назад

    Awesome video. I’d love to invest in a Franklin up front, but part of me feels it would be more responsible to start on a cheaper offset. Any recommendations? Or is it one of those things where u should just swing for the fences right away. Currently only smoking on a Traeger, but want to venture into an offset

    • @richardsobeck583
      @richardsobeck583 Год назад

      I started on a cheap $100 Chargriller. You can do some little things to improve them: use a metallic flexible dryer like tube to lower the smoke stack to grate level, install your own thermometers, put thermal tape seals on the door. It cooked ok and got me into smoking. Nothing is going to change the thin material thickness. It had cast iron grates though.
      I currently have a Chargriller XD Champion or something I was able to get for about 50% off on clearance at Home Depot. A few steps up, but nothing like this Franklin! I still had to put my own gauges in at grate level. I think its about a $500 list price smoker.

  • @joesmith7427
    @joesmith7427 Год назад

    That airflow up the stack is called draft!
    Where are the shelf guides so the drawer can pull out and go back into the cooker??
    How much $$$??

  • @frankortolano5886
    @frankortolano5886 Год назад

    Excellent,,so whats the price for this wonderful masterpiece

  • @Foul_G
    @Foul_G Год назад

    You had me at "Hey there". I just wish I could afford one.

  • @erikevenson4303
    @erikevenson4303 Год назад

    my only complaint would be the small castors. i have to haul my pit over grass occasionally and those wheels would sink in the dirt quickly. any way it could be made with large wheels?