Interesting... On your 38C handle, the design is top to bottom from left to right. and in a lot of other videos, it is top to bottom from right to left. how old is your 38C? is this old design? did it change at some time? or is one of them fake?
Video was needlessly long: What was shown (carelessly gripping the razor blade by its cutting edges and scrubbing a razor with a brush and dishwashing detergent) should have taken about 3 minutes, with no need to twirl the razor around for an additional 15 minutes. Despite it's length, the video still failed to show the disassembly of the razor for occasional complete cleaning. This video shows how a Merkur Progress (a two-piece razor of similar design) can be fully disassembled and put back together for cleaning: ruclips.net/video/hLATlQx4LCU/видео.html Owners should know when disassembled, this "two piece" razor actually breaks down into four pieces: 1) Top plate/bolt assembly, 2) Handle/Baseplate Assembly (held together with a rivet), 3) Internal Post/Knob Assembly (the part that turns), 4) Expansion Ring (the part that keeps the post inside the handle). One end of the solid metal post (which inserts inside the hollow handle) contains the internal threads which engage those of the top plate bolt, while the other end is attached to the tightening knob. The expansion ring ( which is split, and made of a flexible, spring-like metal) prevents the post from sliding out, but still allows it to freely turn, by seating inside a horizonal depression in the post surface near the bottom end, while pushing out against the internal walls of the handle. For those who may want to occasionally disassemble the razor for complete cleaning, the video demonstrates how to pull out the internal post /knob, and to re-compress the expansion ring (allowing it to slide back inside the handle with the post) for re-assembly.
Hello ! william - First of all I would very much appreciate and appreciate your detailed response regarding parts and all other things you mentioned in your response ... As for the length of the video, it's a matter of taste. I have never seen such close-ups in any video as I did. I think it's nice to see every part of the knife up close. 2- As for the extra part hidden inside the handle! Apparently I did not notice..or did not know it existed..so say thank you for everything you mentioned in your response I got smarter from that thanks.
Господь всемогущий! Это же как так надо было станки довести до такого состояния!? Ты ими свиней брил весь год что-ли!? Ужас! Заразу хоть не занёс себе на лицо? Посмотрел обзор...
Hello ! I used Google to figure out what you wrote ... as for the knives they were almost a year on the side in a place with a lot of moisture ... so I made a video ... showing how to clean the knives because they were dirty ... I'm not ashamed of it anyway this is what Photographed with all the consequences of it I'm still whole with it.
Interesting... On your 38C handle, the design is top to bottom from left to right. and in a lot of other videos, it is top to bottom from right to left. how old is your 38C? is this old design? did it change at some time? or is one of them fake?
Hi hello I have them for something like 3-4 years and they are completely original including certificates from Germany
0:51 and 2:35, NEVER touch the blade like this! Only from the small sides that don't cut.
100% right next time, I'm going to be careful not to take the knife out like that, it's because for a lot of years I've been using these knives.
It's just that I feel confident enough with the knives... But I get everything you said. I have to be careful.
Did you use liquid dish washing detergent?
no maby i will.... hand wash ....hand wash the most
Video was needlessly long: What was shown (carelessly gripping the razor blade by its cutting edges and scrubbing a razor with a brush and dishwashing detergent) should have taken about 3 minutes, with no need to twirl the razor around for an additional 15 minutes. Despite it's length, the video still failed to show the disassembly of the razor for occasional complete cleaning.
This video shows how a Merkur Progress (a two-piece razor of similar design) can be fully disassembled and put back together for cleaning:
ruclips.net/video/hLATlQx4LCU/видео.html
Owners should know when disassembled, this "two piece" razor actually breaks down into four pieces: 1) Top plate/bolt assembly, 2) Handle/Baseplate Assembly (held together with a rivet), 3) Internal Post/Knob Assembly (the part that turns), 4) Expansion Ring (the part that keeps the post inside the handle).
One end of the solid metal post (which inserts inside the hollow handle) contains the internal threads which engage those of the top plate bolt, while the other end is attached to the tightening knob. The expansion ring ( which is split, and made of a flexible, spring-like metal) prevents the post from sliding out, but still allows it to freely turn, by seating inside a horizonal depression in the post surface near the bottom end, while pushing out against the internal walls of the handle. For those who may want to occasionally disassemble the razor for complete cleaning, the video demonstrates how to pull out the internal post /knob, and to re-compress the expansion ring (allowing it to slide back inside the handle with the post) for re-assembly.
Hello ! william - First of all I would very much appreciate and appreciate your detailed response regarding parts and all other things you mentioned in your response ... As for the length of the video, it's a matter of taste. I have never seen such close-ups in any video as I did. I think it's nice to see every part of the knife up close. 2- As for the extra part hidden inside the handle! Apparently I did not notice..or did not know it existed..so say thank you for everything you mentioned in your response I got smarter from that thanks.
Господь всемогущий! Это же как так надо было станки довести до такого состояния!? Ты ими свиней брил весь год что-ли!? Ужас! Заразу хоть не занёс себе на лицо? Посмотрел обзор...
Hello ! I used Google to figure out what you wrote ... as for the knives they were almost a year on the side in a place with a lot of moisture ... so I made a video ... showing how to clean the knives because they were dirty ... I'm not ashamed of it anyway this is what Photographed with all the consequences of it I'm still whole with it.
By the way I have a few more knives that I use at the same time a considerable amount