this helped me so much at some point I accidentally went into snap mode and I was so annoyed having to press the pedals twice to change tones mid song. learned a lot here thanks man!
Not gonna lie I haven’t even watched the whole vid yet but I already know it’s gonna be a good one, it’s always a good day when you upload !!! I’ m an absolute beginner when it comes to looping and pedals,and you highly recommended the RC-5 as a beginner looping pedal for guitar.Recently I finally committed and got the RC-5 !!! And your guides and walkthroughs help me a lot ! Any ways, I’m gonna keep watching this great vid , keep up the good stuff!!!😁🎸
Please could you do a video on how to multi instrument record on a boss rc-5 or rc-1? For instance, going through an audio interface/mixer to the pedal to do many instruments?
I haven’t heard of the RC 600, I know plenty about the RC 500 though. But I thanks for the recommendation I’ll try it out. Ps:is it a single track looper or are their more tracks ?
Hi there.....good vid....quick question PLS. Why is "Multiple" with a number in the parentheses, showing up on my screen in Stomp Mode. How do I get rid of it as it won't even accept Rename when I type in a word there. Thanks to anyone with an answer....
Thanks Ben. I am a complete Newbie here. I just bought a New POD GO yesterday/ I am not sure how to hook it up to the back or front of my Amplifier. Do I use the Amp out, Main out, Effects loop send to input of my amp? For now I do not want to use the 4 cable method. I just want to enjoy the POD Go for all it has inside. I am hearing reports that I have to turn off IR Cabinets? or global settings to add Effects out? I am not sure. I just want the purest route to my amps effect return in so I can bypass my amps preamp/ I think I am doing something wrong as some distortion effects always sound like here is some type of synth, or tunnel like sound going on. The only paper work I received was teh cheat Sheet, and no manual? LOL What? Yep. I am an old geezer here and from the old school of Guitar, guitar cord into amp. Please help me. Thanks Ben
A little late but I would recommend you plug your guitar into the guitar in, then run a cable from the output of the pod go to the effect loop return of your amplifier. This bypasses the preamp of the amplifier so that it’s tone shaping doesn’t affect the sound.
This would be fine for someone who is already familiar with this product. You are going way to fast. Take time to demonstrate what you are doing and lay off of the caffene.
Old guys, best watched at .75 speed LOL. Great video, son.Very helpful. I'm looking into pitch shift to detune with the push of a button. These modelers are game changers!
The worst tutorial I've ever seen ! this person should ask himself if he's doing this tutorial for himself or for others? most people willing to learn are beginners, and at the rate the guy is talking, I'm guessing that the majority of people interested in this subject are going to click away very quickly! I'd advise them to click away immediately and look elsewhere before wasting their time on this tutorial.
🎸 Line 6 POD Go Ultimate Guide - www.benrowlandsmusic.com/offers/igdVDDrw/checkout
✅ USE CODE - 'START' for 10% OFF this Ultimate Guide at Checkout!
this helped me so much at some point I accidentally went into snap mode and I was so annoyed having to press the pedals twice to change tones mid song. learned a lot here thanks man!
great first view - but man I had to stop and rewind about 10 times. Slow down for us old folks! :D
Not gonna lie I haven’t even watched the whole vid yet but I already know it’s gonna be a good one, it’s always a good day when you upload !!!
I’ m an absolute beginner when it comes to looping and pedals,and you highly recommended the RC-5 as a beginner looping pedal for guitar.Recently I finally committed and got the RC-5 !!!
And your guides and walkthroughs help me a lot !
Any ways, I’m gonna keep watching this great vid , keep up the good stuff!!!😁🎸
Hope you enjoyed it! Thanks for the support! Another Video coming next week!!
Can’t wait !!!
You’re a Wizard Harry!
Thank you!!!
Can’t seem to find 1 video that explains how to set up the wireless or how to get that part working?
Hey Ben you planning on doing a comparison between HR looper and new RC600 ?
Please could you do a video on how to multi instrument record on a boss rc-5 or rc-1? For instance, going through an audio interface/mixer to the pedal to do many instruments?
You should try the rc600
I haven’t heard of the RC 600, I know plenty about the RC 500 though. But I thanks for the recommendation I’ll try it out.
Ps:is it a single track looper or are their more tracks ?
Can you play 2 guitars through the Pod Go ?
Nice and clear. Thanks.
Hi Teaher! I have hard time the best sound of it
Oh and I just realised, I’m the first one here ! (thank you notification bell!)
Hi! what is your say about the new boss rc-600?
All this went over my head. I'd like to learn how to turn it on and play guitar through it
Hi there.....good vid....quick question PLS. Why is "Multiple" with a number in the parentheses, showing up on my screen in Stomp Mode. How do I get rid of it as it won't even accept Rename when I type in a word there. Thanks to anyone with an answer....
Whats difference between present & bank?
Thanks Ben. I am a complete Newbie here. I just bought a New POD GO yesterday/ I am not sure how to hook it up to the back or front of my Amplifier. Do I use the Amp out, Main out, Effects loop send to input of my amp? For now I do not want to use the 4 cable method. I just want to enjoy the POD Go for all it has inside. I am hearing reports that I have to turn off IR Cabinets? or global settings to add Effects out? I am not sure. I just want the purest route to my amps effect return in so I can bypass my amps preamp/ I think I am doing something wrong as some distortion effects always sound like here is some type of synth, or tunnel like sound going on. The only paper work I received was teh cheat Sheet, and no manual? LOL What? Yep. I am an old geezer here and from the old school of Guitar, guitar cord into amp. Please help me. Thanks Ben
A little late but I would recommend you plug your guitar into the guitar in, then run a cable from the output of the pod go to the effect loop return of your amplifier. This bypasses the preamp of the amplifier so that it’s tone shaping doesn’t affect the sound.
This would be fine for someone who is already familiar with this product. You are going way to fast. Take time to demonstrate what you are doing and lay off of the caffene.
Hi Ben, any issues connecting/syncing the transmitter on your POD Go Wireless? Seems like there are a lot of complaints in that department.
Man, this could've been a lot slower.
fr😭
Great review. Can you play this pedal off the box or do you have to hook it to a computer and give it updates and stuff?
Old guys, best watched at .75 speed LOL. Great video, son.Very helpful. I'm looking into pitch shift to detune with the push of a button. These modelers are game changers!
After he said , first let’s begin with the buttons, then I got lost...
The worst tutorial I've ever seen !
this person should ask himself if he's doing this tutorial for himself or for others?
most people willing to learn are beginners, and at the rate the guy is talking, I'm guessing that the majority of people interested in this subject are going to click away very quickly!
I'd advise them to click away immediately and look elsewhere before wasting their time on this tutorial.
Jez sloooow down.
Gave up ! The voice is far too fast. Pity !
I'm so confused. Just got a pod go with no knowledge and I'm super dumbfounded
man you needa have this on default setting for actual new users some of the buttons on your end are too custom
I can tell tour vid is great I have to say .I also know it's nice to have quik videos however I find your going over things to fast .
just a tip : you don't have to keep saying " and you can then go ahead and "
You talk to fast bro 👎👎👎
I had one. The expression pedal failed in one day. Utter garbage.
Way too fast for me.
watch it again then 😢
Every thing easy when U no how. For the person who don't no much about mulity effects board .this is very hard to use. Think I'll stick to my pedals
They need a new computer programer. All over the place
Beginner guide 😂