Great video sir, One question, how can we limit the tool respective to the boundary like we do in model area clearance(boundary limit ). So that we can control that the tool Periphery will machining along the boundary or the tool center is machining along the boundary. There is a BOUNDARY LIMIT option in MODEL AREA CLEARANCE but not in OPTIMIZED CONSTANT FINISHING.
Hello sir this is shubham prajapati from jabalpur Sir please pehle powershape pe model create kare then powermill me program kare direct model import karne se hamare pas model available nhi hota h pls sir
Sir Mai mohali Mai caddesk Mai betch join kiya hu but 6 month hogaya par delcam ke baare Mai kuch nahi bta rahs
Yahaan say seekh lo any problem to comment
Sir Del cam Mai please one video uplod 2 axis program how to gernate
@@cadcamhub4825 chk play list
@@CAMSolutions sir mujhai ramping or lead in lead out ka batado k jab cutter chalta hai tou cutt andar ki taraf leta hai 2 d model mein
Sir I have finished watching this series till here! Thanks for helping me.
full supportive channel
Keep watching
Very nice sir,please sir besic video jada banaye
Thanks, Very good sir
Great video sir,
One question,
how can we limit the tool respective to the boundary like we do in model area clearance(boundary limit ). So that we can control that the tool Periphery will machining along the boundary or the tool center is machining along the boundary.
There is a BOUNDARY LIMIT option in MODEL AREA CLEARANCE but not in OPTIMIZED CONSTANT FINISHING.
Sir ramping per cutter ko kis tarhan chalaiyegey please jawab zaroor dijiyega
very nice sir, nice explain thanks
So nice of you keep watching and grow
When to use constant z or optimised constant z finishing cycle.
Great👍
So nice sir. Like and comment ker dia hai
NICE SIR SAMAR
Sir ya pochna tha k Jab offsetareaclear finish ho jata hai to last pay step chord deta hai . Us ki wajah kia hai please sir
Sir Aak video Engraving kya program ki bana dayn .
sir agr aapka koi batch h lowest fees to please uske waare m btaye mujhe manufacturing m maharth hasil krnih aapke
jaisi
Shashank vishwakarma
sir
power mill me threading ka program upload kijiye .saath me lead in aur lead out ko behatar tarike se batayiye
very nice sir
Hello sir this is shubham prajapati from jabalpur
Sir please pehle powershape pe model create kare then powermill me program kare direct model import karne se hamare pas model available nhi hota h pls sir
Please join channel with 199/-, and become member. I will send you models for practice
@@CAMSolutions ok sir
Good job sir
Please make a video for SURFACE FINISHING TOOLPATH IN POWERMILL
Thanks alot
ruclips.net/video/QrL41IEXj7w/видео.html please watch like and share
Nice sir
Lead in lead out kesay hoga or ramping ??
See playlist tutorial is there
HUMMOCK MILL TURN TUTORIAL CHI SIR OH MASTER CAM OR DEL CAM JO HO ,SAMAR -KOLKATA
Thanks sir g
Sir ye additional stock kitna hona chahiye finish program me
zero
If we make this program with 3d clearance and then rest machining what will be the difference?
Naam say hi pata lag ra hai dhyaaan say pado naam
@@CAMSolutions but what will be difference if we make program using other option for same model
Thanks you share
Keep watching
Sir very good
Keep watching
@@CAMSolutions I allready watched
windows 10 me powermill open hota hy ky sir
Yes
Hello sir
Region and level me different kya hai
If two pocket Cut take depth according to pocket depth, but in level both pocket cut parallel
sir may i have this model?
Mail me
Very nice sir
Share with friends
Thank u sir