Hello Bhai... First of all Thankyou very much for the very informative video. I have upgraded my XUV5OO indicator bulbs by myself using that SIMTAC Led's, and as you said it was not hyper flashing. Very Happy, thank you keep it up
Bhai as you said I have ordered Simtac Led (contains 4 LED'S in a box) Straight and Cross Separately, but in my XUV500 2016 both Front and Back Indicators are Cross Pin's. so happily I retuned that straight pin box and saved Rs700/-.
The fast flashing is called hyperflashing it is caused when any one of indicator is fused or had replaced with led . IN some cars installing a resistor could resolve the problem of aftermarket led...
Bro right now I am out of country. Just watch my camera installation video or tailgate panel opening video or tailgate switch repair video, there u can see how to remove tailgate panel and then after removing panel u can easily access license plate lights and change them.
Hello those led lights fr indicator are long lasting no risk of short circuit. Also could please advise led for headlamps.can the halogen bulb of projector can be replace by led.
Sumeet bhai, I have been using these lamps for more than a year, no defect in any of the lamp. You can go with these LEDs. For headlamps I am also thinking to upgrade it into LED. Will find some good brand LED and revert back to you. Thank you
@@MANVIRSINGH1313 yes bumper removal only is the problem. If possible please make it. Will be really helpful to many. And, will reduce the trip to service centre.
Harsimranjeet Singh bhaji Sat Shri Akal. OVRM Indicator light ch ki kharab hoya. LEDs kharab ne? Ya cover tutt gya? Vaise indicator mil janda @ 1036 Rs da. Kaffi expensive aa. J second hand laina tan ਬੜੈਲ Vadail (mohali) car scrap market ton lai leo.
Harsimranjeet Singh bhaji fer LEDs kharab ho gayian. J tuhadi nazar ch koi vadia banda haiga jo electronics da kam krda, ohna kol tuc krwa sakde o LEDs replace. LEDs amber color dian lai leo rating dekh k. Chances boht ghatt ne, kyo k light khuldi v hot water ch dip kr k aa (feviquick nal seal kiti hundi aa). Better aa ਬੜੈਲ ton pta kr lo.
Hello bro , i talked with the simtac personal who said if we install led bulb in cars then they stated flickering ( fast blinking in indicators ) , so I would like know that do u make any other alteration to stop over blinking or it did not happened in your car .
You can replace the 1156 brake light bulb by Autobahn led 1156 red bulb with or without storbe effect. Like Simtac, Autobahn is also a Indian brand. You can use led headlight bulbs of this brand for your xuv500 also...
Bhai ye problem meri car me bhi hai, duct hai itni lambbi k airflow drop ho kata hai. Ho sakta ho k air flow band ho, kyo k uske plastic parts kafi kamzor hote hain. Kuch bhi kholne se pehle ek baar kisi aur ki bhi car check krloz
Bhai, ye cheez confirm krni hai to ek kaam kro. Jo aapki car me filament wala bulb 💡 hai uski wattage check kro. Same wattage ka LED hi buy krna, to hyperflashing nahi hogi. Thank you.
Bhai try to remove center console and check connection of GPS Antenna. Click on below link to remove center console. ruclips.net/video/RR16Xgn_rZY/видео.html
Bro thank you for seeking help from me, unfortunately I will not be able to help you out in this matter. Do one thing there is one guy on RUclips a2z car service. He is expert in Hyundai, u can get his contact details from one of his videos
Sir i installed simtec bulbs in my nissan terrano.. but hyperflashing is there.. do i have to replace the fender indicator also to led ? Or any other solution
Bro ye hum kaha se purchase kare mughye apne sare bulb change karne hai tail light k i use Philips led in projector n osram night breaker laser in high beem awsom results
You can purchase these LEDs from following two sites Amazon : www.amazon.in/dp/B07PFVRTP6?r... Simtan Website : www.simtacauto.com/ Two Important note : 1, Rear Indicator Lamps are CROSS PIN (pin to pin 150 degree angle) 2, Front Indicator Lamps are STRAIGHT PIN (pin to pin 150 degree angle)
Bai g asked simtac for xuv500 2018 W11 AT this reply came ("We would like to inform you that we're not sure it will work properly in your Car. Because, Car power supply is high and the each LED bulb is only on 3 Watt. So sometime hyperflash problem is comes") Please suggest i should buy this or not ??
@@MANVIRSINGH1313 yes right bai g....m sharing my same experience for xuv500 latest facelift....w11AT used (Tvs Ntorq LED Indicator Bulb 4pcs , 360 Degree , 45smd , T10/T15 Socket (Yellow, Amber)|||| & SIMTAC Straight Pin LED Indicator Bulbs.....for rear nd front indicator bulb resp.(using from 10oct21) working perfectly till date
@@harrysran1407 that’s nice. But in my case there rear left turn signal one lamp’s 3 LEDs stopped working. Moreover, I installed SIMTAC hazard module in my TVS Apache RTR 180, which got malfunctioned. I believed SIMTAC products are good but I got surprise 😄
@@harrysran1407 Can you please share the experience of changing led indicators . I have w 11 AT and also want to change turn indicator to led. And i am not sure which one to buy or it couse hyperflash please guide me.
same problem, Rear two indicators are blinking, But the front two indicators are not blinking in my etios too. My electrical mechanic said, due to less current supply.
Bhai pls reply mere hyundai verna me lagwaye yeh.. mne dono set mangwaye.. but cross pin wale bulbs hi aage peeche work kr rhe the.. toh mai aage straight pin nahi lagwaye wo set rkha h mere pas abhi.. Without ignition chaaro cross pin lamps perfect jal rhe h with perfect speed.. but jab ignition on karo tab sare indicators fast blink krne lagte.. Pls tell me bhaiya aisa kyu ho rha hai and iska kya solution h?
Bhai Thanq so much for your enquiry, but I am really sorry to say that I don’t have any idea to this problem. But yes there is one mechanic who is expect in Hyundai cars and he uploads videos from his service centre. Let me search his video and definitely he will help you for the same.
@@MANVIRSINGH1313 yes it genuine simtac....ordered otoroys this time....seems like some voltage issue is there as front blinkers are working at 27 V but simtac works on 3V Current....thats the probable issue...otoroys says it works from 3v to 30v voltage....lets see
Bro thank you for seeking help from me, unfortunately I will not be able to help you out in this matter. Do one thing there is one guy on RUclips a2z car service. He is expert in Hyundai, u can get his contact details from one of his videos
Clear and to the point , with attention to detail . The moment I saw the metal tool box I knew this guy is a diy-er . Good video! 👍
Thank you brother. God bless you and your family 🙏🏻🙏🏻
You know a person what he is doing when discription is to the point 👏
Converted your old xuv500 into latest Xuv and video will rock on RUclips
Hello Bhai... First of all Thankyou very much for the very informative video. I have upgraded my XUV5OO indicator bulbs by myself using that SIMTAC Led's, and as you said it was not hyper flashing. Very Happy, thank you keep it up
Which pin Innova 2008 model has cross pin or straight pin broo please tell me
Bhai as you said I have ordered Simtac Led (contains 4 LED'S in a box) Straight and Cross Separately, but in my XUV500 2016 both Front and Back Indicators are Cross Pin's. so happily I retuned that straight pin box and saved Rs700/-.
The fast flashing is called hyperflashing it is caused when any one of indicator is fused or had replaced with led . IN some cars installing a resistor could resolve the problem of aftermarket led...
When changing all indicators into led this hyperflash will stop or not?
Manvirji red led bhi lag Jayega aur sab bulbs led ho jayenge to bahot badhiya effect aayega ! Thanks 👍
Nitin g I tried to get other LED Lamps too, but SIMTAC is producing only AMBER Color right now.
Paaji I have the same model can I install hydraulic bonnet type ?? I have the regular manual bonnet open system
Please watch this video detailed video “How to install bonnet studs or lifts in XUV 5oo W8”
ruclips.net/video/Fp36WaKJF7A/видео.html
After installing these led bulbs my room indicators are flashing fast how to fix it.????
Bro for suzuki celerio cross pin or straight pin ?
Apne voltage aur watts bulb ka batana but company bata deya ye Amazon pe Mel jaega no worries, Thanks..
Bro how did you convert your rear number plate light into led? Pls make a video on how to do it
Bro right now I am out of country. Just watch my camera installation video or tailgate panel opening video or tailgate switch repair video, there u can see how to remove tailgate panel and then after removing panel u can easily access license plate lights and change them.
Hello those led lights fr indicator are long lasting no risk of short circuit. Also could please advise led for headlamps.can the halogen bulb of projector can be replace by led.
Sumeet bhai, I have been using these lamps for more than a year, no defect in any of the lamp. You can go with these LEDs.
For headlamps I am also thinking to upgrade it into LED. Will find some good brand LED and revert back to you.
Thank you
@@MANVIRSINGH1313 Thankyou so much for your response.
Superb work done... superb suv
Thank you
sir apki xuv k bonnet me hydraulics h?
mere pass 2012 model w8 h usme hydralucis nhi h simple stick h
Nahi usme nahi the. I installed it on my own. Video link is below
ruclips.net/video/Fp36WaKJF7A/видео.html
@@MANVIRSINGH1313 okk..now i saw your video..very nice
Bhai same led light muze bike ke headlight Ko chahiya.
Bike ko white led hai wo battery ded ho jarhi hai ya light replace ho jaye gi kay..
Bhai ye wali video check krlo 😊
ruclips.net/video/eCN9nmvizgk/видео.html
Hi DIY singh, great video. Just want to ask whether those bulbs you got are 1156 base??
Thank you bro. Yes its 1156 base
Nice video. With proper explanation. 👍🏻
Kindly make a video for the high beam, low beam and front fog lights replacement also.
Jeshurun Hastings for replacement of headlamps & fog lamp you need to remove front bumper
@@MANVIRSINGH1313 yes bumper removal only is the problem. If possible please make it. Will be really helpful to many. And, will reduce the trip to service centre.
Jeshurun Hastings sure I will try
Bhai, I've got the same simtec led lights for my car, I've changed all 4 indicators but still they are hyperflashing.. any solution for that?
Bhai which car do you have?
@@MANVIRSINGH1313 Hyundai Xcent
You need to replace relay with the one which is compatible with LED lamps
Check whether your car flasher relay can be replaced to LED compatible one or add load resistors to all led’s.
No hyperflashing👍👌.
No hyperflashing
Hi would this cause hyperflashing in xuv500 2nd gen ???
Ovrm indicator repair ho sakdi hai yah bulb change ho sakde neh?
Harsimranjeet Singh bhaji Sat Shri Akal. OVRM Indicator light ch ki kharab hoya. LEDs kharab ne? Ya cover tutt gya?
Vaise indicator mil janda @ 1036 Rs da. Kaffi expensive aa. J second hand laina tan ਬੜੈਲ Vadail (mohali) car scrap market ton lai leo.
@@MANVIRSINGH1313 SAT SRI AKAAL Paaji, ovrm di led saariya ni jagdia iko jaldi jaldi payi hai.
Harsimranjeet Singh bhaji fer LEDs kharab ho gayian.
J tuhadi nazar ch koi vadia banda haiga jo electronics da kam krda, ohna kol tuc krwa sakde o LEDs replace. LEDs amber color dian lai leo rating dekh k.
Chances boht ghatt ne, kyo k light khuldi v hot water ch dip kr k aa (feviquick nal seal kiti hundi aa).
Better aa ਬੜੈਲ ton pta kr lo.
images.app.goo.gl/2XdUKYMPpNanM4QD6
Sir ji mere xuv 500 ke reverse parking sensor me problem he ispe ek video banao
sanwar pathan ok. I will try
Hello bro , i talked with the simtac personal who said if we install led bulb in cars then they stated flickering ( fast blinking in indicators ) , so I would like know that do u make any other alteration to stop over blinking or it did not happened in your car .
Hello brother. No I haven’t installed anything extra. Thank you for comment and seeking advice.
You can replace the 1156 brake light bulb by Autobahn led 1156 red bulb with or without storbe effect. Like Simtac, Autobahn is also a Indian brand. You can use led headlight bulbs of this brand for your xuv500 also...
Sure bro. Thank you 🙏🏻
Front and rear Dono indicator ka pin same nahi hey kya... 2 cross pin and 2 straight pin bulb chahiye kya ?
Yes bro.
Mere gadi k 2nd row k right side k AC vent see air flow nhi ho RHA hai, us ventilator ko open kaise krna hai, kuch bta sakte ho aap ??
Bhai ye problem meri car me bhi hai, duct hai itni lambbi k airflow drop ho kata hai. Ho sakta ho k air flow band ho, kyo k uske plastic parts kafi kamzor hote hain. Kuch bhi kholne se pehle ek baar kisi aur ki bhi car check krloz
does it fit
for all vehicles?
Wherever T10 holder lamp fits, this. LED is gonna fit over there. Different vehicle manufacturers have different standards
Bhayya kya tata safari dicor mein yeh work krenge mtlb relay ki need to nhi hogi aap batado tabhi main order kroon
Please reply
Bhai, ye cheez confirm krni hai to ek kaam kro.
Jo aapki car me filament wala bulb 💡 hai uski wattage check kro.
Same wattage ka LED hi buy krna, to hyperflashing nahi hogi.
Thank you.
Bhai aage headlights mein bulb nhi jal rhe peeche bilkul theek jal rhe hain
Please batadiye kya wajah hai
Useful video pajjeee
Thank you brother 😄
Will it be suitable for sedan cars ??
Yes
Bhai, Mine is W6 2016 model and it shows GPS not attached error . Can you help me to sort out this issue?
GPS signal is 0 and how to update Maps .
Bhai try to remove center console and check connection of GPS Antenna.
Click on below link to remove center console.
ruclips.net/video/RR16Xgn_rZY/видео.html
Bro I installed this in my grand i10 and city...but both are flasing very fast....how to slow it down ?
Bro thank you for seeking help from me, unfortunately I will not be able to help you out in this matter. Do one thing there is one guy on RUclips a2z car service. He is expert in Hyundai, u can get his contact details from one of his videos
Same!!! Did you get any solution?
Either change flasher relay(if car have one) or install load resistors individually to all 4 leds
Did u install load resistors?
No
Paaji maine apni gadi mein lavanya cross pon wala. Bit mere lights hyper flash ho rahe hai . Matlab flashing super fast ho raha hai .
Ho sakta hai LED di quality ka farak ho
Sir i installed simtec bulbs in my nissan terrano.. but hyperflashing is there.. do i have to replace the fender indicator also to led ? Or any other solution
You have to convert all lamps in one circuit to LED.
@@MANVIRSINGH1313 ok sir.. thanx for your reply..
Welcome 🙏🏻
Bro ye hum kaha se purchase kare mughye apne sare bulb change karne hai tail light k i use Philips led in projector n osram night breaker laser in high beem awsom results
You can purchase these LEDs from following two sites
Amazon : www.amazon.in/dp/B07PFVRTP6?r...
Simtan Website : www.simtacauto.com/
Two Important note :
1, Rear Indicator Lamps are CROSS PIN (pin to pin 150 degree angle)
2, Front Indicator Lamps are STRAIGHT PIN (pin to pin 150 degree angle)
Bai g asked simtac for xuv500 2018 W11 AT this reply came ("We would like to inform you that we're not sure it will work properly in your Car. Because, Car power supply is high and the each LED bulb is only on 3 Watt. So sometime hyperflash problem is comes")
Please suggest i should buy this or not ??
Bhaji, I think you should try, if hyper-flashing you can still return that to simtac. In my W8 there is no hyper-flashing.
@@MANVIRSINGH1313 yes right bai g....m sharing my same experience for xuv500 latest facelift....w11AT used (Tvs Ntorq LED Indicator Bulb 4pcs , 360 Degree , 45smd , T10/T15 Socket (Yellow, Amber)|||| & SIMTAC Straight Pin LED Indicator Bulbs.....for rear nd front indicator bulb resp.(using from 10oct21) working perfectly till date
@@harrysran1407 that’s nice. But in my case there rear left turn signal one lamp’s 3 LEDs stopped working.
Moreover, I installed SIMTAC hazard module in my TVS Apache RTR 180, which got malfunctioned.
I believed SIMTAC products are good but I got surprise 😄
@@MANVIRSINGH1313 g bai g
@@harrysran1407
Can you please share the experience of changing led indicators . I have w 11 AT and also want to change turn indicator to led. And i am not sure which one to buy or it couse hyperflash please guide me.
Can this bulb fit into scorpio n
Is it 21W, 12V led's?I tried in my etios liva car but it was not blinking
same problem, Rear two indicators are blinking, But the front two indicators are not blinking in my etios too. My electrical mechanic said, due to less current supply.
Bhai pls reply mere hyundai verna me lagwaye yeh.. mne dono set mangwaye.. but cross pin wale bulbs hi aage peeche work kr rhe the.. toh mai aage straight pin nahi lagwaye wo set rkha h mere pas abhi..
Without ignition chaaro cross pin lamps perfect jal rhe h with perfect speed.. but jab ignition on karo tab sare indicators fast blink krne lagte..
Pls tell me bhaiya aisa kyu ho rha hai and iska kya solution h?
Bhai Thanq so much for your enquiry, but I am really sorry to say that I don’t have any idea to this problem. But yes there is one mechanic who is expect in Hyundai cars and he uploads videos from his service centre. Let me search his video and definitely he will help you for the same.
ruclips.net/user/a2zcarservice
Ye bhai ki video me number search kr k in tak pahunch sakte ho
@@MANVIRSINGH1313 thank you so much bro i'll search for his number
5.7ltr oil penda Scorpio ch 6 lt conpant kendi aw pr 5.7 hi penda nhi upper level to uppar chala ja da engine oil
Kinna recommended aa ona hi pao. Check owners manual
Bhai meri. Xuv ki right side ki parking light blue color ki fuse ho gayi hai.. koi solution batao
Check wiring near headlight. Kai cars me wire katt jati hai.
you should consider changing your steering horn cover.
Sure. Cover alone is not available. It comes as an airbag assembly, which is expensive
Bhai LED tail bulb installation ka video upload kariye
Bhai wo LED lamp available hi nhi.
I have installed it in my car....rear one is working perfectly but front one not working....any idea?
Exactly what issue is there?
Flickering fast, not working?
@@MANVIRSINGH1313 halogen bulb is working properly but leds are not working
@@abhaidwivedi is it SIMTAC branded LED?
Try to alter it with other LED.
@@MANVIRSINGH1313 yes it genuine simtac....ordered otoroys this time....seems like some voltage issue is there as front blinkers are working at 27 V but simtac works on 3V Current....thats the probable issue...otoroys says it works from 3v to 30v voltage....lets see
@@abhaidwivedi bhai update kardo otoroys kaisa hai
How to solve hyper flash in car which relay we have to install pls provide the link
In which car did you face hyper flashing issue?
@@MANVIRSINGH1313 Alto 800
Nice
Zen Innovations thank you
please tell me about tray placed on tool kit please
Can you give more details of your question?
Latch and tool cover tray damaged so I want to change it, sir in your car I saw some new tray cover(tool box cover)
How many km's your car has done?
75,000 Km
friends I you have XUV5OO then you can surly go for it, it is not hyper flashing, for other cars I'm not sure,
this fit in wagnor 2014
👍🏻👍🏻👍🏻👍🏻👍🏻
🙏🏻🙏🏻🙏🏻
Bro i installed this bulbs in my i20, but i am facing now hyperflashing issues.
Nimesh bhai ek aur bhai hai RUclips pe jo Hyundai ki car ke expert hain. Main unka video share krta hu
Bro thank you for seeking help from me, unfortunately I will not be able to help you out in this matter. Do one thing there is one guy on RUclips a2z car service. He is expert in Hyundai, u can get his contact details from one of his videos
Yaar meri i20
Ch hyper flashing hon lg pyi
Osm bro
Anish muthu thank you brother
konsi site se liye hai
shahbaz khan Amazon se bhi le sakte ho, ya fir SIMTAC Company ki website se order kr sakte ho
MANVIR SINGH LOTEY aur kuch naya modify nhi kia kya apne
shahbaz khan main bhai ab canada aa gya. Jab India jau ga to kru ga
मेरा डायरेक्ट जल रहा है क्या खराब हो सकता है
Bhai yaar meri gadi me left side ka kwik hai aur right side Thaik brite hota hai
Bhai indicator lamp kon se hain, hopefully relay defected hogi
@@MANVIRSINGH1313 left side ke Back Wala Nahi jalta hai
@@happysinghbihta3215 rear light k paas grip hai, usko chk kro. Waha tak supply aa rahi hai? Nahi to fir wiring chk krni pde gi.
Bhai reverse siren ka video banate xuv500 ka
Sameer Bhagwat thanks for comment. Pura bataya kro kya krna hai.
@@MANVIRSINGH1313 Bhai xuv500 ka reverse siren kam nahi kar raha hai...... Reverse siren repair or installation ka video banao
Sameer Bhagwat it is located under coolant reservoir. I will try to make a video to show how to remove and check connections of siren.
Cost of these 4 LED Lamps after using coupon code is 599 Rs
What was thea coupon code
bhai ander ki light puri off hi gyi h koi bhi ander ke light on nhi ho paa rhi h xuv 500
Sharukh Ansari please check respective fuse
kon sa feues hoga
Bhai mera Alto 800 mae 4 indicator laganeke baad hyper flashing ho rah hai kya karu?
Will hyper flashing happen ? If yes how tol solve
No, hyper-flasing didn’t happen. I am not sure about solution. Sorry