Это видео недоступно.
Сожалеем об этом.
How to make MIST MAKER at home | DIY mist maker
HTML-код
- Опубликовано: 17 авг 2024
- #electronics #mistmaker #555projects
In this video tutorial, I am showing how to make your own mist maker
download circuit from here (thanks to great Scott)
www.esclabs.in...
buy piezoelectric disc
s.click.aliexp...
from amazon
amzn.to/3j20wKQ
amzn.to/34jCerH
EDISON SCIENCE CORNER
This channel is all about science and tech videos....no fake thumbnails, no fake content
IoT projects
Arduino projects
electronics projects
DIY stuff
blynk app projects
Arduino tutorials
science projects
Whatsapp group
chat.whatsapp....
Instagram
/ edison_science_corner
Facebook
/ escpage
Telegram
t.me/edisonsci...
I also learnt it from Scott...he is genius
True that
Great Scott?
Maybe you have an answer. I want to build a dry run protector to shut it off when there is no water.
@@LEO-xo9cz you can achieve it in different ways...using controller and sensors or using the same 555 timer ic u r using to make the mist maker. Watch carefully that the pin 4 of the ic(reset pin) is connected to the +ve terminal that turns on the ic. If it is zero or grounded your ic will not turn on. So take two wires and remove the outer coating and insert the metal wires deep inside the water container to the level that satisfies you where you placed the disc. Now connect one wire with the +ve terminal of the battery and other wire to the pin4(or the reset pin) of the 555 timer ic. That's it....if water goes below the level your ic will shut itself off automatically.
But the problem is you will lose a small fraction of power as your ic is connected when there is no water. So better connect the gnd wire of the circuit with the gnd terminal of the battery......and then connect one wire (remember the 2 wires you put inside the water container where you placed your piezoelectric disc) with the +ve terminal of the battery and other wire with the whole circuit's +ve input. This method will be very simple and will help to save power too.
Yes 🥰🥰
learned*
Scotty’s the best lol. Nice job 👍 bud.
🔥
Great video! I hope to be able to implement something like this in place of a carburettor or injection system in a car, as such a fine mist of fuel has a potential to improve efficiency, esp. for ethanol and other fuels that unlike gasoline don't vapourise at room temperature
❤️
@@side-room-21 Not yet but I've done some minor theoretical work on it
Eh..
Sir one question please do reply I have got Pizeoelectric Humidifier sensor and now I need to create power circuit board for it to work or If I directly connect it to power it will work? Please reply ir it's urgent
I didn't understood
Excellent description. Kudos.
Kudus
Very Simple Circuit, thanks for sharing.
Thanks sir 😊
Many thanks.
Wow! very clean. I can build an air freshner using this. Otherwise it would cost me around 30$-100$. This costs only around 10$, probably less.
Thanks. Yes you can build this with 5-8 $
Appreciate your job, nice video. request you to provide the circuit for 2.4MHz disk.
Thanks. I dont have the circuit for 2.4mhz
Impressive dude!
Thanks buddy
Just another intelligent indian ❤️
😊😊😊😊
I want to use it in order to grow plants without soil (aeroponics). I don't know if it's work with this mist maker system, I will try
Try
Hey me too! Please keep me updated if you do it! I'll drop a comment when my system gets going
The mister will have to be on all day. Will the board overheat?
thanks, I think I'll build one for my model boat smoke effect
❤️
excellent info keep it going all the very best from germany
Thankyou from india
Thank you for posting this video. I am going to try it and hope it helps someone. It's very hot!
Go on
Will try bro
🤩🤩🤩
Hi,
Thanks for sharing. Want to use it fo my orchids. Can you tell me if it's possible to connect several piezoelectric disc. If yes, what is the maximum number. Thanks for your update. Shiam
No
@@EDISON_SCIENCE_CORNER
Thanks a lot for your update.
The DC power supply cables are soldered and it rest on the water.
It does not create a short circuit?
@EDISON SCUENCE CORNER, does this device have a switch were you can turn it on or off, or does it just automatically create mist once it touches water?
No switch
This is really cool :P I get very dry skin and like making things with electronics; so I think I will try to make one of these. I think having it more contained would be nice, so I guess I'll be attempting to make my own humidifier.
Good luck
Go on
1. to place the component to pcb board, should we follow where place it like the video or it allowed to randomly place it??
2. for the green thing, can we change it with usb type b? so it could connect with type b cable
hope you answer it
You can place components according to your idea
Ofcourse you can replace screw terminals with any connector but you have to give 14v
🙏🏼🇧🇷👍
Just subscribed to your channel.
Beautiful work, you have a video showing how the Joules thief and its components work and how the electrons behave.
I made a joule thief video. But not explaining everything . But i will try 😃
Tks for the vid. May I know whats the wattage of the mist maker in your video? Just wanna know the power consumption. Can it turn on for 24 hrs without overworking the gadget or recommended to off it every night. Tks
I am not sure about is power. It will Overheat and damage 100%
Is it same funtion with aquarium sterilizer like twinstar sterilizer?
I don't know sir.!
Thank you for the video. I have this little white cap on the end for my atomizing transducer which I intend to replace it, I'm unable to solder it on the circuit board because on the original board doesn't have that, may I know is there a way to do it?
Can you share the images. Use the social medias to share links are in the video description
THANK YOU
😊
Very descriptive vedio, must me a expert, other vedio are just a normal display of talent without assuming that other are new to this domain, so theis vedio is very helpful, every stage ,every Insteument is explained very well
Thanks
GREAT JOB. If I can find the needed parts here in the south of Portugal I go for it. Is it possible to connest more piezoelements to one board and if so what is to be used extra?
You can connect
@@EDISON_SCIENCE_CORNER Thank you for the reply. A max amount of elements? I think I try this for aeroponics setup.
Do I have to change the other components if I'm using a 2 MHz piezo electric disk?
We cant generate that frequcy with ic555
Can i used piezo buzzer instead of piezo cryatal
No 😯
Stick the transducer below the cup with arldite and get same vibration effect. Use suitable heat sink for transducer else it will burn off, in short time. It is good methodology to deliver medicine right deep into lungs . But use it judicially. It can also be used to clean rust parts. De stain clothes or as washing machine.
Thanks❤️
bnane me jyada pese use hote hai..
batter hai ki.. Taiyar product hi le le .. vo bhi customize or aasani se kahi bhi le ja skte hai..
English please sir🙏
Where did you get the inductor coil that you have used so how to make it?
Bought it from amazon
Thank you so much man
Welcome sir😊😊
Hello sir I can't find 5k variable resistor, can I use potentiometer with the same value?
Use 4.7 k
Thanks!
excellent video, I have a doubt in the diagram where pin 7 of the 555 is connected
Not connected
oh thanks, sorry for the inconvenience but I have another question, I already put together the circuit but the most it sounds a beep and when I put the sensor on the surface of the water the beep starts to cut off and the mosfet gets too hot
Can I use 1.7 mhz piezo disk with this circuit?
No 113khz
@@EDISON_SCIENCE_CORNER ok
Many thanks Sir, so how to make a humitity sensor now in order to make this humitity monitoring? I need to connect a humitdity sensor at any circuit witch, when need, switchs automatically on or Off the mistmaker circuit. (Without arduino please)
Check my other videos
Can it support two piezo?
I Never checked that sir
@@EDISON_SCIENCE_CORNER thank you.
If developed this idea can be used in textiles .b cas they want mistifiresr to reduced heat as well as humidty
Humidity took important place in spinning idstru .yarn quality will increases and yarn cut will be decreased .Any yar without cuts and knots will be a qualified yarn cotton or pokyaester .I thing this idea will take major use in textiles if reaserch and develope ment .And also it eill give particlar improve ment in garden industry or gardening bcas humidity ,p h and moisture will be controlled by misting.and finalky toy industry .gfor kids .thank u .
Yes we can use
Hi, hope that you can shed light on the piezo disc used in eg nano facial mist spray. Does it have any metal components that will be in contact of water? Cos i was recommended to use a metal-parts-free spray to avoid the ingredients de-stabilized by metal. Cheers😀
Thank you
They are usually made of metal, but I think you can find ceramic compund piezoelectric discs from some vendors.
Does the piezo element get worn out? And did you try other heavy liqueds to vaporise?
Worn out means???.... Alcohol is okay.
Thanks for ur video. Can this method be refined into smaller bubbles? I would like to use this way to CO2 diffuser.
I dont think soo
U can try nano air stone
Can I connect that disc directly to 5v charger?
Absolutely yes but .nothing will happen
Hi how if i put this behind a small fan, can it make the air cooler ?
Nice one😍
Hello, Can I use different inductor? I can't find similar like you have
Try with that i don't know the outcome
How about the Capacitor? Can I use ceramic or mylar?
As far as it has the same value you can use it
I see this kind of circuit from the other channel, is it normal that the MOSFET getting hot? Thanks!
Normal case
Hm, nice video and all.
But the circuit doesnt seem to work for me. Built it like in the schematic, and it does put out a high pitched sound when the potentiometer is at max, but when tuning up nothings happening. Any suggestions?
My other try with a readymade ne555 circuit hooked up to a irfz44n just seems to catch fire, altough i can not find any problem....^^'
Things working perfectly once again...
Refer to the great scott tutorial also
@@EDISON_SCIENCE_CORNER thx :)
hola oye una pregunta por cuantos voltios puedo sustituir la pila?
Hi. Ask me in English please
Bro can i add more pizeos in parallel with only one circuit
No.
This project 25mm disc can use?
Use it check the frequency first
Very Nice ... Information Sir...
Thanks sir
Nice work thanks for sharing
Welcome sir
can i connect more than one piezo to same circuit
No
I saw your comment on greatscotts video! You fixed the mosfet overheating? Can you use 5 volts to power it like the usb misters
Oh no not yet still has the problem. I don't know if it is possible with 5v
@@EDISON_SCIENCE_CORNER how long can it run if it heats up? I want to humidify mushrooms
Not possible
@@EDISON_SCIENCE_CORNER greatScott made me think this was possible. Why post the video and not explain the part about it not working lol
It. Is possible. I said it has some problems
sir ca we say it is water vapor machine plz sir tell me ?
We cant say
can i just connect the ultrasonic disc mist to usb ?
Noo . Will not work
I have a question can you connect a n USB dongle in the screw in the left side
For what
@@EDISON_SCIENCE_CORNER The mist maker
I dont understand what you mean
Modul ini hanya untuk satu piezzo , atau bisa untuk beberapa piezzo bro ? 🙏
You have to add different driver circuit for that
could this circuit drive multiple disks? like say a 4 or 6 head array or would we have to create a different circuit?
You have to use different drivers for that
@@EDISON_SCIENCE_CORNER I would be very interested in a video looking at that!
One more question Sir how can I make use of Arduino UNO with This mist maker
Yes
Very nice video 😀🤠
Thanks sir 😊
Im new to the electronic world, is Irf z44 Mosfet and Irf z44N Mosfet the same thing?
Allmost same. You can refer the datasheet
any way i could control the on off with an arduino?
You can. Also check the channel video. There is a video with Arduino Uno
hey can i build a large disc? and thick disc?
No
@@EDISON_SCIENCE_CORNER will i did my homework and they say i can use 8 to 9mm size thick.. not sure why you say no... and they do sell them big one also. iam not sure why you say no... lol
@@EDISON_SCIENCE_CORNER pzt5, pzt5
Can i use 108khz membran??
Yes
can i use a 12v battery for this?
Might be
Why kind of capacitor you use here? The 10NF it is ceramic or mylar?
Type of capacitor doesn't change anything here
@@EDISON_SCIENCE_CORNER thank you very much
Great job!
One doubt: the power source, is it 4,8v or 40,8v?
14.8V you can use 12volt. Thanks 😊
Noo
Nice work. Great info. very clear instructions and your items are well lit and visible. Thanks for the effort you put into this video.
Thanks brother
FYI the element photos you use in your description and the one you actually use are very different in operation principal.
No both are same
@@EDISON_SCIENCE_CORNER They are not. You describe and show images of a solid piezo disc used in submerged foggers, but in your project use a piezo ring that vibrates a metal mesh plate which cannot be submerged used in diffusers
Not getting you 100% i used 113 khz piezo from AliExpress to make this
Can I use a 330uh inductor instead of the 220uh??
Yes you can use.
Can i use “220uH 1/2W 0410 Color Ring Axial Lead Type Inductor” ? also will this circuit works in 12v 1A input?
I dont know about the result
How long can we continuously run this? 12-14 hours a day?
No we can't
where did you get the waterproof ring for the disc? Any link?
Check the discription 🥦
How did you find or calculate the frequency? Which equipment have you used ?
You can find that from datasheet
@@EDISON_SCIENCE_CORNER I cant get you brother where to find the data sheet?
You can find the resonance frequency from the datasheet of disc. You can measure the 555 oscilation frequency using a CRO
Hi, can you run it without water (for some experiments) or it will burn out?
May beeee
I need this for poultry egg hathing machine
Good
Hi! What type and exact specifications of capacitor is the yellow one. I think it's the 10nF but I don't know what type it is😅. Thanks!
Film capacitor. Any type will work
@@EDISON_SCIENCE_CORNER I almost had a hard time finding that type of capacitor,😅 now I know any type will work. Thanks a lot!
Can i used 1 board and 2 mist sprayer?
Probably not
any change i could do to make it work with a 12v transformer?
Yes.
It will work on 12
@@EDISON_SCIENCE_CORNER nice, ty for replaying so fast
Excellent bro I m an youtuber
Thanks bro. Give the link of your channel ☺️
I made the board according to the diagram, but when I connect it to the power, the mosft and the variable resistor get very hot, I have to disconnect it before it burns, and the piezo doesn't work either. I can't find the problem, can you help me??
Search great scott mist maker you can find the same
This safe for aquarium?
Yes
Nice job!
Thank you sir
Can i oprate more than 1 disc on same circuit ?
No you have to use a separate driver for disc
@@EDISON_SCIENCE_CORNER ...sir, piezoelectric disc used in video resonate at 113Khz but at my place most of piezoelectric discs available resonate at 1.77Mhz . Sir can you pls make video on it?
Can i make air cooler use this?
Yes but not effective
Is this Disk is manufactured in India. If yes by which manufactures..
I don't know about that sir. I bought it from AliExpress
@@EDISON_SCIENCE_CORNER Bringing materials from Ali express means Directly or indirectly financing Chinese government who uses money for our Destruction..
I bought 2 years before
What if we use this In front of cooler .?
Good
Intellegent thinking
💚❤️💚
hi is it normal to get shock when i touch the white damper area when the device is on? cause im afraid it might have electric leak
Its is beacuse of the oscillation
@@EDISON_SCIENCE_CORNER thanks for replying. So its normal right? can i touch the water also sir?
Actually i am 100% not sure about that. I am talking about the vibrations of disc. I dont know about yor circuit ..!
Does it gives any cooling effect?
Yes
Are there any calculations to done to find the capacitance, resistance, power supply and all
Yes . Because the output frequency is determined by the RC components
You google search for that
@@EDISON_SCIENCE_CORNER thanks and keep up the creativity
🤩🤩🤩
can i use ordinary pizo,,that use in multimeter
That's works on 1.7mhz we cant use in this circuit.
thanks
Welcome
Ye kese banega apki plat to plan or simply he conact kese hoga
English please
Can you make 10pcs 113khz piezo disc in 1 circuit?
No ! That is not possible with this circuit if you want 10 then you should build 10 indidual circuit.
can we make a bigger version of this? like your home is on fire?
May be
I have a 2.4mhz piezo disk, can I use it in this circuit?
No you can't
@@EDISON_SCIENCE_CORNER what should i change to do that with 2.4Mhz disc?
Hi brother what is the life of the Mist Maker that you have build?
I am still using this (no full time use )
Sir can I run two pizo with this circuit
You have to use two drivers
thank you
Welcome sir
tell me. how to work on arduino that project. PWM in piezoelectric? it work? please tell me
??
how to use Arduino in these project?
From where did you order the ultrasonic mist disk
Check the video discription sir