Fantastic. This is exactly how an 'in breathing circuit' ultrasonic nebulization machine works. The device is housed in a clear plastic housing, the piezo element is exposed to a small chamber where 5 ml of Bronchodilator (Asthma) medication, is added. The chamber has 2 connector ends (a standard circular connector has 22 mm outside diameter, 15 mm inside diameter) which goes in between the inspiratory tubing and the ventilator. Every breath takes micron sized particles of the liquid drug to the respiratory tract. This device proved very valuable to covid patients on ventilator. Please be inspired to make one. Good luck
@creativenawab2773 Yes baba, it already exists in the market. It is very expensive. I have used it but the model is only available as a ventilator attachment for ICU patients. Can you make one?
*humiditer We liked it **Fastly.Cool** so much in the basement, we bought a second one for the main level. The amount of moisture it pulls out of the air is astonishing.*
Would it be possible to add a second mister in series with the first? Or is there a way to add on more ultrasonic elements to this circuit such as amplifying the out put frequency and adding additional channels?
How it works perfection, for we who just took one apart for a project and didn't know better until now. Awesome video for its tight focus, execution, and usefulness (to me).
My original intention for this humidifier was to use it for plants that require high moisture levels. After using it in my room, ruclips.net/user/postUgkxtD9aJ2m6GU-X1IChQxjn9l31K1A7Kpwj however, I think that's where it is going to stay in the fall and winter season at least. The increased humidity in my room made the room warmer and more comfortable. I had first ran the humidifier for 4 hours with the timer setting for it. After the first hour, I checked my room and can feel the difference. When the full 4 hours was up, I checked again and noticed that the humidifier was shut off as it is suppose to. The moisture level never seem to get passed 56/57%. I then let it run until all the water is used up, which it wasn't all used up. There are still some left in the base that you are not suppose to add water to. I filled up the water tank all the way again, being careful when removing it from the base. Some left over water may spill out. After putting it back on and setting the unit to auto, I let it operate. It didn't stop running, rather I don't know if it did at any point since I didn't check it regularly, for 24 hours after which the water in the tank ran out. The moisture reading never passed 56/57%, which may be a good thing for me. Being situated right next to my bed, the noise was not very noticeable with the occasional water gurgle from time to time as the unit ran.
I have to make a working model of water cycle so if i make the river , will this remain ok [ matlab ye kharab to nai hoga na jab hmlog pani me jyada der rakhe to ? ]
These fragile diaphragms seem to have a very limited lifetime. I used a humdifier with exactly this similar looking atomizer. Never created a lot of mist from the beginning, after a mere 20hr or so it would no longer spray. Just sputter or do nothing. I replaced the feeder wick, I tried to clean the tiny holes of both diaphragms in a 50W ultrasonic bat, the result is the same: barely any mist action if at all. Crap. Even at prices around US$2 for these simple aroma diffusing humidifiers from AliX the money is a waste. I guess there are REAL and POWERFUL ultrasonic mist generators out there, as one can admire as table fountains etc. But they cost a lot, for a reason. This tiny atomizer head is garbage, 100%
Fantastic. This is exactly how an 'in breathing circuit' ultrasonic nebulization machine works.
The device is housed in a clear plastic housing, the piezo element is exposed to a small chamber where 5 ml of Bronchodilator (Asthma) medication, is added. The chamber has 2 connector ends
(a standard circular connector has 22 mm outside diameter, 15 mm inside diameter) which goes in between the inspiratory tubing and the ventilator. Every breath takes micron sized particles of the liquid drug to the respiratory tract.
This device proved very valuable to covid patients on ventilator.
Please be inspired to make one. Good luck
👍
Plz I want this
I also think same of your comment
@creativenawab2773 Yes baba, it already exists in the market. It is very expensive. I have used it but the model is only available as a ventilator attachment for ICU patients. Can you make one?
*humiditer We liked it **Fastly.Cool** so much in the basement, we bought a second one for the main level. The amount of moisture it pulls out of the air is astonishing.*
Would it be possible to add a second mister in series with the first? Or is there a way to add on more ultrasonic elements to this circuit such as amplifying the out put frequency and adding additional channels?
is there a way to make it work without driver circuit
How it works perfection, for we who just took one apart for a project and didn't know better until now. Awesome video for its tight focus, execution, and usefulness (to me).
My original intention for this humidifier was to use it for plants that require high moisture levels. After using it in my room, ruclips.net/user/postUgkxtD9aJ2m6GU-X1IChQxjn9l31K1A7Kpwj however, I think that's where it is going to stay in the fall and winter season at least. The increased humidity in my room made the room warmer and more comfortable. I had first ran the humidifier for 4 hours with the timer setting for it. After the first hour, I checked my room and can feel the difference. When the full 4 hours was up, I checked again and noticed that the humidifier was shut off as it is suppose to. The moisture level never seem to get passed 56/57%. I then let it run until all the water is used up, which it wasn't all used up. There are still some left in the base that you are not suppose to add water to. I filled up the water tank all the way again, being careful when removing it from the base. Some left over water may spill out. After putting it back on and setting the unit to auto, I let it operate. It didn't stop running, rather I don't know if it did at any point since I didn't check it regularly, for 24 hours after which the water in the tank ran out. The moisture reading never passed 56/57%, which may be a good thing for me. Being situated right next to my bed, the noise was not very noticeable with the occasional water gurgle from time to time as the unit ran.
Can I use wall fan and these units to cool down get cool air, is it?
yes
@@MREasyMaker can you suggest me a big good humidity maker for a large room, my intention is to get cool air only
Hi, are there any small holes in the vibration mold? thanks.
Yes. Some small holes.
@@MREasyMaker Thanks.
If you put a dye in the water will it spray coloured water eg: black dye for simulated smoke?
Yes
No it wont. The dye will clog the wick. Check out TRS trains .
Can I make a cooler using it?
Is the fogg cold enough?
fogg temperature as like as your water temperature.
My "cooler" is basically just this inside a tube and then a fan blowing it into the air
So I bought one , but the mist I’m getting is not even close to what you got there , can I fix it or no
Hlw sir can i used it for nabulyzer??? What is your Opinion??
the fog cool or hot?
Little cool than the sanitizer temperature.
@@MREasyMaker so it is not vapor? Ohh...so it sprays water in fine sprinkles?
@@b-beluga4510 yes. Sprayer
How to bay it
I have to make a working model of water cycle so if i make the river , will this remain ok [ matlab ye kharab to nai hoga na jab hmlog pani me jyada der rakhe to ? ]
No problem
And did you stick the wire with a hot tool , can I use fevi quick to stick 3.7v battery ?
@@funshunwithvd8494 wire is pre assembles. Put some glue on wire joint,
Can we immerse the disc entirely in water ? Or will it get damaged if we dip it entirely in water ?
Place it by touch of water, not in the deep water.
Banano Jai diagram ta daba
Can i put ice water bro is there any problem by using cold water on it plz reply?
no problem
@@MREasyMaker Are you sure is there no problem by using with cold water pakka sure????
@@speedygfx yes
Is this make atmosphere cool?
Little
@@MREasyMaker please make lost of mist so that it will be cool use small fan for cooling
Can i add more strips to this module?
price price
Can I decrease my room temperature slightly with this??
no
Buy link?
It emits hot or cold steam
Not cold but feeling little cold
Do you need a special control for that, or just dc voltage will do it?
only dc
Olá vc já tentou na posição horizontal? Gostaria de usar na miniatura como escape do caminhão miniatura
Maker bajar online mein aata hai ki nahin aata please batao na 😎
Online mai sabkuch milta hai
12v battery possible?
This circuit operated with maximum 6v
can I turn it on with no board?
circuit board is must
2:35 @@MREasyMaker
Does the water stay cool or heats up?
neither cool nor heated,
For Purchasing, no link you provided
Yes dear. Sorry for that. Check after 5min
I have an old mist part. But i doesnt spray. Do you know what's the problem in my mist?
Purchase a mist maker kit
Ye jo niche carpet hai usko kya khte hain or kha se le skte hain koi please btana
paper cutting mat. amazon
@@MREasyMaker thanks 👍
Bhai kha se buy kare batao na please 🙏🙏🙏🙏🙏🙏
Would you please inform me power (volts value) on Ultrasonic Mist Maker
5 to 9v
@@MREasyMakerwhere can I buy the mist maker
What is the price of this. Humidfer
How is buy
Click the link given in description
Can u teach me how to solder tge wire to circuit
what do you mean by 'Tge' wire?
Khredna hai kaha milegi
😢
Online milega. Maine robu.in se purchase kiya.
Bhai Kaha se mangvaya
malamig po ba siya?
یہ ڈسک کس جگہ سے ملتی ہے۔؟
My one isnt sprayng water why is that ?
Kahan sa mily ga
Order kha sa kara
check description
Plz price
Bro Will It Charge My 2000mah Lithium Battery
yes
hello sir vibration wala kaha sa milega
Is this mist cold or hot?
temperature as same as water
Product ka link do na please 🙏🙏🙏
ROBU.IN Pe search karna.
Set this device in front of fan... Its helps
सर इस वीडियो को बनाने का आप का क्या मकसद है परपस है कृपया बताएं
Its just jeolusing us and nonsesnse vid
These fragile diaphragms seem to have a very limited lifetime. I used a humdifier with exactly this similar looking atomizer. Never created a lot of mist from the beginning, after a mere 20hr or so it would no longer spray. Just sputter or do nothing. I replaced the feeder wick, I tried to clean the tiny holes of both diaphragms in a 50W ultrasonic bat, the result is the same: barely any mist action if at all. Crap.
Even at prices around US$2 for these simple aroma diffusing humidifiers from AliX the money is a waste.
I guess there are REAL and POWERFUL ultrasonic mist generators out there, as one can admire as table fountains etc. But they cost a lot, for a reason. This tiny atomizer head is garbage, 100%
what circuit did u use?
fog maker circuit included with that kit, available online.
Fogger ceramic disc প্রয়োজন, আপনি কি সাহায্য করতে পারবেন কোথায় পাবো বাহ অনলাইনে কোন পেইজে পাবো
ami online theke niechilam, apni online e search korte paren
Bahi ha kdr mala ka muja Bata o
Ye kitne ka aata hai please bataa do
Link batao bai
Please keep the circuit diagram for this
Its very simple, see this video carefully
ruclips.net/video/fgl5UKyIx9M/видео.html
You can get the circuit diagram from here.
As gajit ka name kiha
Iska rate batao aur kha milega
online shopping site mai milega
Kahape milega
Amazon
Maybe you can do your on nano automated alcohol mist dispenser that will be cool to make
🌹🌹🌹🌹
Easy to catch fire
What happens if there ks no water and the humidifier is still working
nothing
ए स्मोक मशीन कितने रुपए की आती है
Piezoelectric disc price in market
Dont know market price.
you may check the given link.
¿por que no lo conecta directamente a la batería 5v y ya? ¿POR QUE LA COMPLICACIÓN?
এটি দাম কত হবে বলবেন
Kahan sy milta h adres
amazon, robu.in pe search karo
Hello sir..
Kenar link ta dao
amzn.to/2Rm99HW
robu.in theke o nite paren. description e deuya aache
It is humidifier heart.
Saw the price and iam flabbergasted 1,2k some even goes for 1.5k lol... For what?
Cara atasi kalau mati
Link dal lo
1 please
You got cheated by online youtuber . You can buy full diffuser set at that price.
Only white thing
প্লিজ নাম্বার দেন ভাই।।
mreasymaker@gmail.com e mail korun.
@@MREasyMaker price in Pakistan