Biggest performance tip. Use EU Roms. Free 15% performance boost which is huge. Eu maxes out at 50 fps, vs the US 60. Game runs at the same speed, just less frames to process.
Actually I select “Async” instead of “None”. For me it seems to play the audio smoother by not forcing it to sync with the video which - smoother audio playback at the cost of audio being in exact sync is definitely worth it!
This video helped me the most! I wanted to play god of war 1/2 on my android and it runs on 40-60%. But after you mentioned about the EE Cycle Rate and EE Cycle Skip, i suddenly have 80-120% gameplay! Thanks.
Alot of people don't mention it but if you tap on the i button next to the 3 dots there will be an added option to choose from which is the game fixes tab.
after updating my galaxy s20 plus to android 12 things have changed drastically.before, with android 11 aethersx2 it was bad with both opengl and vulkan api, with android 12, with opengl bloody roar 4 it goes badly while with vulkan it's exactly the contrary, very fluid gameplay even at 4x resolution, stable framerate at 50 fps, exceptional !! at this point it seems obvious to me that the problem was the phone software and not the poor optimization of the emulator for the exynos.
You can’t really optimize an app for a specific model of CPUs. Even if you can, that’s some assembly-level tweaking(as seen on AMD’s Zen compiler) or just flat out cheating(Intel compiler). The emulator generates generic assembly for a general-case arm CPU with NEON instructions support. If it was dealing with the specifics of each possible manufacturer and generation of CPU, the level of time and effort required for that would be insane while there wouldn’t be much of a performance boost. However, in regards to graphics, emulators and games really do provide several rendering paths for different GPU vendors because of things like driver-specific bugs or vendor-specific features.
Thank you so much for organising these tips into one place, I wanted to play Persona 4 and Dragon Quest 5 PS2 on my RG353M and these tips make them run pretty well, the voice acting on P4 is slightly slow but manageable
Similar issue here with Dragon Quest 8. Most battles are playable but FMV with voice audio drops speed between 40-60%. Any suggestions? I'm using a Pixel 6.
If some people notice a massive dip in performance in games like midnight club 3 ill consider messing around with the CRC hack. Ive set mine to aggressive and the game is running at the correct speed from the previous update. Although my s9 dosent run the game at 60fps 100 20fps -30fps 100% is more than enough for me
Tips: Take a day off from work because you're going to be combo mashing these settings for hours as each system AND GAME is inherently different. Develop the mindset of tinkering is part of the fun and you won't be pulling your hair out. Gl
Reset settings did the trick, in fatal frame when a ghost appeared it would drop 40fps, now its constant 60, another with the updates Kuon is playable now, except the ghosting effect but onc3 TC offset it added (unless it's in advance but my app crashes every time I go there.)
Same here i've played fatal frame 2 when i reached miku's sister and when i battled the ghost woman the game turned into green screen and mio is nowhere to be seen
My phone samsung galaxy a71 5G has exynos 980 but opengl runs horrid on my games about 50% speed and it bogs down often, switching to vulkan makes my games run 70% to 90% when under high load, other than that i can play some games at 100% speed, ssx tricky i can boost resolution up to near 720p and not a problem, ssx 3 however loves to slow to a crawl for no reason, makes no sense, my phone has the octa core with 6gb of ram, i get that the cores don't matter as much but still, i should be able to run games alot better considering the ps2 has 32mb of ram and 4mb of vram, then again this emulator is still in its early stages, and doing very well i might add
Please make a video on upscaling tips . I can't get rid of this bloom in God of war 2 . I have tried the upscaling hacks from the advanced settings, but it's still the same .
What really sucks is that (correct me if I'm wrong) the Android 12 update or OneUI 4 to be specific on Samsung phones completely broke OpenGL.. none of my emulators work while using OpenGL, including Aethersx2 and Dolphin. Hope it gets fixed soon, it really sucks having to use software rendering... P.S. I use a Samsung galaxy s21 ultra (exynos) UPDATE : The Vulkan rendered is somehow completely functional now !! Not sure if it was from an update for my phone or the emulator itself (pretty sure it was from the phone because other emulators are now working too), but things are running BEAUTIFULLY! :D UPDATE #2 : Bug fixes for Mali GPUs came out with the alpha-1058 update !! HUGE.
I think it's wrong to assume that switching to PAL will automatically improve performance. Back in the days of the PS2 we still had CRT TVs and PAL had a higher resolution than NTSC. So I guess it depends if the performance is being impacted by resolution or frame rate.
I think it's wrong to assume that switching to PAL will automatically improve performance. Back in the days of the PS2 we still had CRT TVs and PAL had higger Resolution than NTSC. So I guess it depends if the performance is being impacted by resolu
very good tips. i have a retroid pocket 3+ for mobile gaming. not all options are still existing in the menu, a year has past, but i got ratchet and clank 1 and tekken 4 under better conditions. nice for an handheld which has less power then a phone but more then a switch
My phone runs DBZ BT3 at full speed but when I upscale the resolution there's like a weird outline around characters. If anyone knows anything about that, I'd appreciate the help.
I had the same problem on god of war on pcsx2 on pc. You should only use multiple of 2 resolution and i think the setting is called half pixel hack. Turn that on. Its a hack for misaligned 2d sprite games but it can help with full screen effects. Hope this helps. :)
Some games on ps2 emus just doesn't run well when upscaled. Ace Combat is another one that has issues with upscaling. Atleast in PCSX2 there are fixes for it, but idk about Aethersx2
I'm having a hard time running jack 2 in the open world... I tried under clocking which results in dropped frames but increases game speed to a consistent 100% but I get drops down to 20 fps using these settings... Where as with default setting on Jak 2 there are no frame drops but the game can have massive slow down in some of the bigger open sections in the game. I have a one plus 9 and I know it's powerful enough to run these games. I even just beat Jak and Daxter OG with absolutely zero performance issues... Granted that's a smaller game
Jak 2 just happens to be a ridiculously hard game to emulate. For many years this was the case on PC too. I run the PAL version at 50hz on my s22+ and still get some drops but is playable
I'm sorta giving up on AetherSX2 and will stick to Dolphin MMJR2 and Redream for my 6th gen needs. I still have a Vita for some PS2 ports. The new update ruined it for me and I can't downgrade.
I'm experiencing gradual slowdowns while playing God Hand in the latest version. It goes back to normal when I I pause the emulator but goes back to slowing down over time.
I have a Samsung galaxy A54 5G phone and it runs great. The only problem is when I play games like DBZ budokai tenkaichi or guitar hero, the games slow down slightly when there is a bit to much going on in the screen. How do I fix this minor issue?
Alot of games rely on the capped 60fps, almost like a timer. So if you increase framerate it might make the physics break, or other strange occurences. A good example of this is older bethesda games like the original skyrim and fallout 3/new vegas, the physics engine just shits itself and does not work properly. Other times the entire game just speeds up, as though you put it on a 2x speed hack. Ace Combat does this iirc.
I have Unisoc T610 cpu which is kinda equal to Snapdragon 665 And it runs so good in 1x Res, even though its hurt the graphic at least it still playable, the biggest issue is the heat especially for me that live in Indonesia ,which is outside temperature can be up to 34° c , and the phone slowly overheating, and the battery while playng aether is run out faster compare when I played a 60fps pes mobile (pes mobile is the most game that waste battery in my case) From alpha 720 until now I feel a lot of improvement in this app, for example I wasn't able to use Vulkan, and now I can, and a lot of game become more smooth
The video was helpful but I do wish you presented the information a bit more organized,such as showing long over the recommendations in each settings tab (global and per game) instead of jumping between all all one after another. Why didn't you try each hack on your phone and showing the results instead of just saying you tried a combinations of everything you mentioned to get the game running at full speed?
Thanks for the feedback! I was initially going to do just that, but decided against it. Finding proper performance will vary from device to device and game to game. I wanted to avoid people just copying my specific settings for a specific device and specific game and not experimenting on their own.
Hi Mr Sujano I hope you can help me. I've just recently found out about this PS2 emulator from watching your great videos so firstly I really sincerely thank you for that, I have been looking to play my PS2 games in portable form for so long and this seems like a dream come true.... I am using this emulator on my Samsung Note 20 Ultra, but it's the UK model that uses the Exynos 990 CPU instead of the Snapdragon (whether that makes a difference or not). Anyway I had this up and running beautifully a few days ago until today when the device had a software update, I think maybe to Android 12, and its completely broken the emulator now. The only way I managed to get anything working is by switching to Vulkan but I now notice games not working properly, for example I am playing Phantasy Star Universe 2 & whilst fighting some enemies, one would just move in the same spot as if it was jogging on the spot!! but its as if its not there because you can't hit it, therefore you can't progress further until you clear them all. Just to make sure, I started the game from scratch it did the same thing on the same enemy at the same point. I now don't know whether I should continue to use the emulator if all games will start to do this especially if I get far in them, any ideas what I can do to help this issue? Thank you very much for any advice, Danny.
HOLY CRAP! So, I started the video with the reset. I chose fast. Now twisted metal is running 100 percent!! Now I gotta tweak to make it look nicer. Hey man how you get all the covers to show up? I used this one link i found added it, and it only got ONE cover for twisted metal none of the others.
I can read a very low opacity text at the middle-bottom saying "saving power...". I'm considering this may be the cause of the performance drop on my end.
I found the cause, it's my device. I tried using gaming mode and pro gaming mode using gaming app. Default safe settings went well. My device is OnePlus 6.
For me if i turn off Multi Threaded VU1 it slow down the emulation speed and i hope this can only work on higher performance device and it's good to me to turn on that Multi Threaded VU1 and it's boost my game performance
I grabbed every ps2 emulator I could find (aether, play, goldps2, pstwoe, and a few others) and none of them work - at all. they all keep saying that no game is found. Ive got 4 different types of games iso's stored on my pc that I keep in my library. chd, iso and cso and bin and still nothing. what am I missing?
About 2D fighting games ? how can I fix the sprites of the characters ? looks like sawtheet ..... on flycast we can fix that with a oprion, but with aethersx2 is possible ?
How do u stop the nonstop scanning whenever I play a game... It takes me back to the games list while scanning for games and bios, mostly when I play Need for speed ...what could possibly be the problem
I'm using a huawei p smart z, and I'm trying to run midnight club dub edition remix. My game crashed soon as I was out of the garage. Any tips to make the game run better?
Looking for help on aethersx2 Been happily playing away for months. Today my control pads won't work in games (OK in menu) at all, nothing. Wasted 3 hrs trying to fix. Anyone else? Any idea? Using 8bitdo same as I have been for months. Help
soooooo smt nocturne worked perfectly before by disabling depth emulation now the demifiend's legs glitch after the update (goes under the ground) anything im doing wrong?
If you've got tips, feel free to share em! Tweaking AetherSX2 settings can make a huge difference in your emulation experience!
PCSX2 dev builds have migrated to git. You now have 32bit or 64bit options.
Can't send link because YT blocks it
On my galaxy zflip3 5g it runs about 70-100%
Could I have some help
It's snapdragon 888
Biggest performance tip. Use EU Roms. Free 15% performance boost which is huge. Eu maxes out at 50 fps, vs the US 60. Game runs at the same speed, just less frames to process.
Eu meaning
@@R_AATH_ the European version of the games
@@YGTVYassirsGamingTechVlogs31 oh ok thx
Thx for the tip you are the Best 🤝🤝🤝🤝😘😘😘
okay! ill give it a try.
well im editing to say i tried with the game wild arms 5 and it runned just the same. what a shame
Actually I select “Async” instead of “None”. For me it seems to play the audio smoother by not forcing it to sync with the video which - smoother audio playback at the cost of audio being in exact sync is definitely worth it!
OH! lol I thought you meant "off"
This video helped me the most! I wanted to play god of war 1/2 on my android and it runs on 40-60%. But after you mentioned about the EE Cycle Rate and EE Cycle Skip, i suddenly have 80-120% gameplay! Thanks.
What device do you use
If you want god of war(1 andGOS) ppsspp is still the best for phone performance ppsspp is just generally underrated lol
@@jpraise6771Wow I didn't know the first GOW was available for psp! Thanks for the info Imma check it out
THANK YOU SO MUCH FOR THIS. No matter what Emulator I've used, it only ran PS2 games like shit. This helped so much
Alot of people don't mention it but if you tap on the i button next to the 3 dots there will be an added option to choose from which is the game fixes tab.
Awesome! The EE underclock setting did really Help a lot. 👍
after updating my galaxy s20 plus to android 12 things have changed drastically.before, with android 11 aethersx2 it was bad with both opengl and vulkan api, with android 12, with opengl bloody roar 4 it goes badly while with vulkan it's exactly the contrary, very fluid gameplay even at 4x resolution, stable framerate at 50 fps, exceptional !! at this point it seems obvious to me that the problem was the phone software and not the poor optimization of the emulator for the exynos.
I don't believe your story
aethersx2 was not yet optimized on all chipsets. they all testing it on snaps and mediatek(..i think?)
You can’t really optimize an app for a specific model of CPUs. Even if you can, that’s some assembly-level tweaking(as seen on AMD’s Zen compiler) or just flat out cheating(Intel compiler). The emulator generates generic assembly for a general-case arm CPU with NEON instructions support. If it was dealing with the specifics of each possible manufacturer and generation of CPU, the level of time and effort required for that would be insane while there wouldn’t be much of a performance boost. However, in regards to graphics, emulators and games really do provide several rendering paths for different GPU vendors because of things like driver-specific bugs or vendor-specific features.
Thank you so much for organising these tips into one place, I wanted to play Persona 4 and Dragon Quest 5 PS2 on my RG353M and these tips make them run pretty well, the voice acting on P4 is slightly slow but manageable
Similar issue here with Dragon Quest 8. Most battles are playable but FMV with voice audio drops speed between 40-60%. Any suggestions? I'm using a Pixel 6.
It works. Setting my phone to performance mode makes God hand runs on 100% speed. (SD 712)
If some people notice a massive dip in performance in games like midnight club 3 ill consider messing around with the CRC hack. Ive set mine to aggressive and the game is running at the correct speed from the previous update. Although my s9 dosent run the game at 60fps 100 20fps -30fps 100% is more than enough for me
Great tips! Thanks for sharing 👍
Tips: Take a day off from work because you're going to be combo mashing these settings for hours as each system AND GAME is inherently different. Develop the mindset of tinkering is part of the fun and you won't be pulling your hair out. Gl
Reset settings did the trick, in fatal frame when a ghost appeared it would drop 40fps, now its constant 60, another with the updates Kuon is playable now, except the ghosting effect but onc3 TC offset it added (unless it's in advance but my app crashes every time I go there.)
Same here i've played fatal frame 2 when i reached miku's sister and when i battled the ghost woman the game turned into green screen and mio is nowhere to be seen
Same here! I spent hours trying things. Cant believe simple reset did it!
For exynos owners. OpenGL tends to perform better. In some games Vulkan is awful.
Tried with with s10 with exynos 9820.
I have the sd 855 (also s10) Seems opengl has performed better on what I have played.
android 12 s10 5g with exynos opengl gives no more then 10 fps with vulkan its playable
My phone samsung galaxy a71 5G has exynos 980 but opengl runs horrid on my games about 50% speed and it bogs down often, switching to vulkan makes my games run 70% to 90% when under high load, other than that i can play some games at 100% speed, ssx tricky i can boost resolution up to near 720p and not a problem, ssx 3 however loves to slow to a crawl for no reason, makes no sense, my phone has the octa core with 6gb of ram, i get that the cores don't matter as much but still, i should be able to run games alot better considering the ps2 has 32mb of ram and 4mb of vram, then again this emulator is still in its early stages, and doing very well i might add
Please make a video on upscaling tips . I can't get rid of this bloom in God of war 2 . I have tried the upscaling hacks from the advanced settings, but it's still the same .
Run on Vulkan. Vulkan doesn't have bloom issue
What really sucks is that (correct me if I'm wrong) the Android 12 update or OneUI 4 to be specific on Samsung phones completely broke OpenGL.. none of my emulators work while using OpenGL, including Aethersx2 and Dolphin. Hope it gets fixed soon, it really sucks having to use software rendering... P.S. I use a Samsung galaxy s21 ultra (exynos)
UPDATE : The Vulkan rendered is somehow completely functional now !! Not sure if it was from an update for my phone or the emulator itself (pretty sure it was from the phone because other emulators are now working too), but things are running BEAUTIFULLY! :D
UPDATE #2 : Bug fixes for Mali GPUs came out with the alpha-1058 update !! HUGE.
I'm on Android 12, but not Samsung, and AetherSX2 works great. I mostly use Vulkan though, but I had no issues with OpenGL.
@@AllenGuarnes yeah, it seems like it's only affecting devices with exynos chips
Hace you installed Samsung's game drivers for mali? That might help; if not, at least it would with other native games
@@josuepalafox1253 didn't know that that was a thing ! I was only able to find game drivers for the s20, not s21 ultra.. any thoughts?
I'm using android 10 with mali cpu, should i also update to android 12 if it might boost my performance?
I think it's wrong to assume that switching to PAL will automatically improve performance. Back in the days of the PS2 we still had CRT TVs and PAL had a higher resolution than NTSC. So I guess it depends if the performance is being impacted by resolution or frame rate.
I think it's wrong to assume that switching to PAL will automatically improve performance. Back in the days of the PS2 we still had CRT TVs and PAL had higger Resolution than NTSC. So I guess it depends if the performance is being impacted by resolu
@@ArfamJachyngzay 😁
Late reply but some people also make patches for the NTSC versions which makes them run better than its PAL counterpart.
very good tips. i have a retroid pocket 3+ for mobile gaming. not all options are still existing in the menu, a year has past, but i got ratchet and clank 1 and tekken 4 under better conditions. nice for an handheld which has less power then a phone but more then a switch
Working perfectly without glitch on my mobile. I'm loving it. Modern warfare battlefield killzone & all
i got a snapdragon 888 still this videohelped a lot becz performance was not stable and now it is thanks to you
I'm using an Odin AYN, and the vulkan setting definitely improved the gameplay
This was very useful. Thanks.
Extremely awesome video, thanks a lot!
My phone runs DBZ BT3 at full speed but when I upscale the resolution there's like a weird outline around characters.
If anyone knows anything about that, I'd appreciate the help.
I had the same problem on god of war on pcsx2 on pc.
You should only use multiple of 2 resolution and i think the setting is called half pixel hack. Turn that on.
Its a hack for misaligned 2d sprite games but it can help with full screen effects.
Hope this helps. :)
@@sammymcfone8281 it helped with outline but now there's square shadows on the stage grounds.
Some games on ps2 emus just doesn't run well when upscaled. Ace Combat is another one that has issues with upscaling. Atleast in PCSX2 there are fixes for it, but idk about Aethersx2
Thanks Mr. Sujano!!!
Thanks for watching!
Iv got a p40lite... Some of your tips help and I managed to finish both God of wars
I'm having a hard time running jack 2 in the open world... I tried under clocking which results in dropped frames but increases game speed to a consistent 100% but I get drops down to 20 fps using these settings... Where as with default setting on Jak 2 there are no frame drops but the game can have massive slow down in some of the bigger open sections in the game. I have a one plus 9 and I know it's powerful enough to run these games. I even just beat Jak and Daxter OG with absolutely zero performance issues... Granted that's a smaller game
Jak 2 just happens to be a ridiculously hard game to emulate. For many years this was the case on PC too. I run the PAL version at 50hz on my s22+ and still get some drops but is playable
Imagine if aethersx2 gets online mode 🔥
It wont
@@AlexEqualsAwesome93 Hello grass man Nice to see you here.
Your RUclips name meaning in India would be "do not swell"
jokes apart love your work
I'm sorta giving up on AetherSX2 and will stick to Dolphin MMJR2 and Redream for my 6th gen needs. I still have a Vita for some PS2 ports. The new update ruined it for me and I can't downgrade.
You can get the older builds here:
www.aethersx2.com/archive/?dir=beta
Does anyone understand why underclocking makes things run faster? Logically absurd
Thanks for the video so useful and worked for me well tysm
If you want to play Virtua Fighter 4 Evolution. Keep EE Cycle Skip to Normal (0). Desync audio also help to sync frame with action
Do you know how to fix draining battery with this emulator?
@@Tarek_Issa77 this comment made my day thanks!
Hey guys you can also use 60 fps cheat codes in games on aethersx2 like i do and it works great.
Im using poco x3 pro
We have the same device.... But for me only Valkyrie profile 2 is a hard to find the right settings.
I'm experiencing gradual slowdowns while playing God Hand in the latest version. It goes back to normal when I I pause the emulator but goes back to slowing down over time.
I have a Samsung galaxy A54 5G phone and it runs great. The only problem is when I play games like DBZ budokai tenkaichi or guitar hero, the games slow down slightly when there is a bit to much going on in the screen. How do I fix this minor issue?
Was a little confused you didnt actually state WHICH settings fixed your issue?
when open the menu press toggle frame limiter you will have 80 fps depends on your phone
Alot of games rely on the capped 60fps, almost like a timer. So if you increase framerate it might make the physics break, or other strange occurences. A good example of this is older bethesda games like the original skyrim and fallout 3/new vegas, the physics engine just shits itself and does not work properly. Other times the entire game just speeds up, as though you put it on a 2x speed hack. Ace Combat does this iirc.
Sujano, do you have tutorial for dolphin emulator better performance for kinda heavy game(s)?
Don't use the one on the Google play store use the APK.
@@Johnnydubois what do you mean? Should i download on their website instead of on Play store?
@@findmi2708 I believe he means the dolphin MMJR version, downloading the APK
@@SagatSP oh, is there other version of dolphin emulator?
I have Unisoc T610 cpu which is kinda equal to Snapdragon 665
And it runs so good in 1x Res, even though its hurt the graphic at least it still playable, the biggest issue is the heat especially for me that live in Indonesia ,which is outside temperature can be up to 34° c , and the phone slowly overheating, and the battery while playng aether is run out faster compare when I played a 60fps pes mobile (pes mobile is the most game that waste battery in my case)
From alpha 720 until now I feel a lot of improvement in this app, for example I wasn't able to use Vulkan, and now I can, and a lot of game become more smooth
Yeah. I have Snap732G and I can play Persona3-4 with no problems at 1x res. 2x res has some occasional slowdowns on Persona 4 but it works anyway.
You are a legend sir.
The video was helpful but I do wish you presented the information a bit more organized,such as showing long over the recommendations in each settings tab (global and per game) instead of jumping between all all one after another. Why didn't you try each hack on your phone and showing the results instead of just saying you tried a combinations of everything you mentioned to get the game running at full speed?
Thanks for the feedback! I was initially going to do just that, but decided against it. Finding proper performance will vary from device to device and game to game. I wanted to avoid people just copying my specific settings for a specific device and specific game and not experimenting on their own.
@@MrSujano That makes sense. It might just be me having difficulty keeping up with your pace without a written guide.
Hi Mr Sujano I hope you can help me. I've just recently found out about this PS2 emulator from watching your great videos so firstly I really sincerely thank you for that, I have been looking to play my PS2 games in portable form for so long and this seems like a dream come true.... I am using this emulator on my Samsung Note 20 Ultra, but it's the UK model that uses the Exynos 990 CPU instead of the Snapdragon (whether that makes a difference or not). Anyway I had this up and running beautifully a few days ago until today when the device had a software update, I think maybe to Android 12, and its completely broken the emulator now. The only way I managed to get anything working is by switching to Vulkan but I now notice games not working properly, for example I am playing Phantasy Star Universe 2 & whilst fighting some enemies, one would just move in the same spot as if it was jogging on the spot!! but its as if its not there because you can't hit it, therefore you can't progress further until you clear them all. Just to make sure, I started the game from scratch it did the same thing on the same enemy at the same point. I now don't know whether I should continue to use the emulator if all games will start to do this especially if I get far in them, any ideas what I can do to help this issue? Thank you very much for any advice, Danny.
Thanks a lot bro 👍
Very good tips here, but still want to learn more.
I switch to vulkan mode all emulator that i use, but then suddenly i cannot access sittings anymore and emulator did'nt work at all
Let's goooo
HOLY CRAP! So, I started the video with the reset. I chose fast. Now twisted metal is running 100 percent!! Now I gotta tweak to make it look nicer. Hey man how you get all the covers to show up? I used this one link i found added it, and it only got ONE cover for twisted metal none of the others.
I have a Samsung Note 10 plus, and I have 256 GB of space and 12 RAM. I want the best settings, and I don't want the slowness to happen. Please reply?
Thx sir i wanna try this emulator
I can read a very low opacity text at the middle-bottom saying "saving power...". I'm considering this may be the cause of the performance drop on my end.
I found the cause, it's my device. I tried using gaming mode and pro gaming mode using gaming app. Default safe settings went well. My device is OnePlus 6.
I can only play few 2d games on my sd 632 i hope the creator will optimize his emulator
Check out tmnt 2007 it runs good
For me if i turn off Multi Threaded VU1 it slow down the emulation speed and i hope this can only work on higher performance device and it's good to me to turn on that Multi Threaded VU1 and it's boost my game performance
Hello Mr. Obi Wan here! :D
After all that, it is running at 30‰ speed in my oppo f9
,plz help
What did everyone do for a BIOS?
I strongly suggest to get a device with the Snapdragon 865 or another superior Snapdragon chipset.
Mr sujano the music in backround is awesome pls what title this music is?
I grabbed every ps2 emulator I could find (aether, play, goldps2, pstwoe, and a few others) and none of them work - at all. they all keep saying that no game is found. Ive got 4 different types of games iso's stored on my pc that I keep in my library. chd, iso and cso and bin and still nothing. what am I missing?
PS2 BIOS..?
When I try to launch most Rockstar game apps like Bully on my Pixel 5 they crash. Are they not compatible?
Enable vsync......Disable frame limiter. Twisted metal black is hitting almost locked 70fps now
I need some tips for sd 888 as soon as i enable Vulkan the game crashes i have no luck running Vulkan at all
I have the same issue with the SD 888 so I end up using Open GL.
Which phone and which game? I have the Samsung Flip 3 (SD888) and I can enable Vulkan with Final Fantasy X.
About 2D fighting games ? how can I fix the sprites of the characters ? looks like sawtheet ..... on flycast we can fix that with a oprion, but with aethersx2 is possible ?
The game doesn't work for me and I have a black screen. Help
How did you get gt on your SD card because when I tried it it wouldn't copy over
What's the best overall settings for Aethersx2 on the Pixel 5?
Sir..... How about octa core android 10,,, it is still works??? New subz here sir and your answer is appreciated..... Tnx sir.....
I have OnePlus 9 but why some games are lagging wht is the issue . Even not coming good graphics
What is you using version this video?
Hurting to play Gran Turismo 3 in my Poco x3 Pro, many drop frames in specific circuits (Rome for instance), anyone else with same issue?
i assume you can't play on night tracks and sunset tracks
Why does my aethersx2 not have the graphics driver options in advanced settings?
why can't the buttons be synchronized on my phone
I'm playing crash twinsanity and crash is walking by himself someone knows how to fix it?
How do u stop the nonstop scanning whenever I play a game... It takes me back to the games list while scanning for games and bios, mostly when I play Need for speed ...what could possibly be the problem
It's probably one of the settings I know one of them says that it skips scanning the bios
What do I do if I am stuck on the red screen even after loading the game.
I have a Samsung Tab S8.. any tips for my gameplay to go smooth?
what is softeare rendendering thread and audio interpolation mode? and whats the best settings for performance
Why can't i play aethersx2 in samsung A10s( 2gb Ram and 32gb storage). Can someone answer me 😢😩😫
Guys download the europe iso helped me alot runs way better now.
Going to try this hoping it works. If i can get 60fps in twisted metal black id do dirty things. Using retroid pocket 3 plus. Is that mid?
Colour me confused... I have a sd888 device and a SD870 and the later performs way better than the prior... Just how?
phones tends to throttle sd888 cuz they runs so hot, SD870 is probably the best for aethersx2.
I'm using a huawei p smart z, and I'm trying to run midnight club dub edition remix. My game crashed soon as I was out of the garage. Any tips to make the game run better?
I have a Samsung Galaxy A71 5G, any tips to boost the performance?
Set EE CYCLE RATE to 300% and EE CYCLE SKIP to (maximum 3), confirmed working on the game SSX 3
@@southernautodiy2643 1 last thing, under ZArchiver what zip file do I use to compress Wii games?
Looking for help on aethersx2
Been happily playing away for months. Today my control pads won't work in games (OK in menu) at all, nothing. Wasted 3 hrs trying to fix. Anyone else?
Any idea?
Using 8bitdo same as I have been for months.
Help
I have xiaomi redmi 7a it has Snapdragon 435 i think and i can't download the AetherSX2 and not from Google
Im early again im not trying but this time i see something interesting i wanted a ps2 emulator to play gta sa since the remaster is crap!
I call it Re-Rendered. If it were a Remaster, they would have used the GTA 5 engine.
@@Emudude1963 i was gonna say remake but ye they call it a remaster
What to do if your game crashes
When I select my game and try to play I get the playstation logo to come up and when it goes away it just black screens any help?
Thats a bios issue. I kept adding new ones and it finally worked.
I want to run gran turismo 4 at 60 fps on a note 20 ultra with a Mali G77 but i cant seem to find the right settings
i have a oneplus 7 pro with the back glass removed and added a cooler on top of the motherboard and i can get 60fps on 2x/3x graphics
What about on Nvidia Shield?
Will Eethersx2 work properly on a redmi note 10?
How can we make graphics hd and full to screen
MTVU only works in SoCs with 3+ high performance Cores
What can you do if it's says please insert a playstation or a playstation 2 format disc
soooooo
smt nocturne worked perfectly before by disabling depth emulation
now the demifiend's legs glitch after the update (goes under the ground)
anything im doing wrong?
I have redmi note 5 pro. Will it work in Snapdragon 636???
Mr sujano how can i talk with you i know how everyone any game of ps2 they want the could complete it without any issue
Guys I play dbzbt3 on my huawei Y7 I've been trying everything I DEOSNT work