Thanks for the guide, this worked on my 2002 1.4 Micra - for anyone struggling, find a friend with an oscilloscope, you need to be looking for a square waveform which runs at around 4 volts d.c. We got misled by the Haynes manual diagram, which doesn’t specify the tach feed. But on this particular loom, tap into the following: Red - red tacho wire, for 12 volts d.c supply Red/white - white tacho wire, for backlight with dash lights Blue/ black - green tacho wire, for square wave rpm signal from Ecu And black from the tacho to earth /ground
@@Autoshieldcars the only wire I was missing in the Haynes manual was the tacho feed - i hope you're going to do some more videos, they are fun little cars :)
Tbh I’m not sure if I will do more, this was a little lockdown project, I have down other bits but they aren’t video worthy really, but I think the car will be going soon to fund my next car for oval racing at lydden hill next year hopefully. But it could be staying though, Currently adapting some spacers to fit some be wheels so may be a new video but not sure. Thanks for the support though
There's not much content on these K11's, so anything is welcome :) - good luck with racing fella, it's a lot of fun but it does drain the bank account quickly!
Yeh I understand that and would be cool but my parents aren’t a fan of having a shitbox on the drive, let alone make I clapped out. I’m only 15 so yeh it does drain it quick but my amazing stepdad has helped me all the way with It
!!!!FOR ANYONE WANTING TO INSTALL ONE ON A COILPACK ENGINE BUT DONT HAVE THE BLUE/BLACK WIRE ON THE CLUSTER !!!! ----- I installed mine by running a wire through the car into the engine bay and splice into one of the coils (CYLINDER 2 WORK BEST) THEN FOLLOW THE VIDEO AS EXPLAINED FOR POWER + AND EARTH - ... THE SWITCH IS OPTIONAL AS YOU CAN GET A DIMMABLE TACHO LIKE I DID REMOVING THE NEED FOR THE SWITCH .. HOPE THIS HELPS ANYONE WHO CANT FIND THE BLUE/BLACK WIRE
I followed this guide for my 1999 1.0 Dizzy and got everything working, light switch and power to rev counter, I just can’t find RPM signal on any of the wires. I asked the question on a FB group, the response was to tap into red/yellow wire off distributor connector.
I’ve done exactly what you said in the video and I’ve got the lights to work but the needle will not move when Erving ag all any help please 1.0 coil pack
Anyone else help me with the wire i have to splice into on the coil pack engine i have individual coils there three wires not sure which one I have to splice to or is it all of them
Hello mate..im just curious.i has had a ecosport with coil pack aswell..i want to install a extra tachometer on my car.should i connect the green wire of tach to the wire of original tach of the car?i woried that maybe they going to show some warning on my dash board...pls help..thanks
@@Autoshieldcars mate from what i heard is you connect the green wire from tach to green and black wire from cluster wire..but its show on the video theres only one wire attach to the green and that is blue...everytime i try to tap my green wire to each one of wire from my cluster..there is only to wire that my tach has a source which they read incorrect like the white wire with stripe..the needle of the tach goes to the higher number and stay the light ..and the other one is brown wire with stripe which the reading is the needle is jumping all the time like craczy..but look i found that the 2 wire that has a reaction to the tach when i tao the wire has another wire that seperate with electrical tape ..and the other wire has the same..in all of my wire on my cluster..they have coupke of wire with partner..maybe i need to connect my green wire to both of the..i need to find which one..the white wirh stripe or the brown wirh stripe..thanks
I don’t know the mate. This video is designed specifically for coil pack k11’s as I don’t know for dizzy or the other micras so don’t want to say a wrong thing
@@leoncalton9330 well the needle was good enough. It revved up more or less In syncs with the car. I sold it nearly a year ago now so can’t say much more than that unfortunately
Thanks for the guide, this worked on my 2002 1.4 Micra - for anyone struggling, find a friend with an oscilloscope, you need to be looking for a square waveform which runs at around 4 volts d.c. We got misled by the Haynes manual diagram, which doesn’t specify the tach feed. But on this particular loom, tap into the following:
Red - red tacho wire, for 12 volts d.c supply
Red/white - white tacho wire, for backlight with dash lights
Blue/ black - green tacho wire, for square wave rpm signal from Ecu
And black from the tacho to earth /ground
Hmm, I done this all from the Haynes manual and it went smoothly, but nice one mate
@@Autoshieldcars the only wire I was missing in the Haynes manual was the tacho feed - i hope you're going to do some more videos, they are fun little cars :)
Tbh I’m not sure if I will do more, this was a little lockdown project, I have down other bits but they aren’t video worthy really, but I think the car will be going soon to fund my next car for oval racing at lydden hill next year hopefully. But it could be staying though, Currently adapting some spacers to fit some be wheels so may be a new video but not sure. Thanks for the support though
There's not much content on these K11's, so anything is welcome :) - good luck with racing fella, it's a lot of fun but it does drain the bank account quickly!
Yeh I understand that and would be cool but my parents aren’t a fan of having a shitbox on the drive, let alone make I clapped out. I’m only 15 so yeh it does drain it quick but my amazing stepdad has helped me all the way with It
Thank you.
I am a new follower of your channel
Greetings from Sweden
Did everything the same. Even tried a different blue wire but didnt work. Everything worked except the tacho wire
!!!!FOR ANYONE WANTING TO INSTALL ONE ON A COILPACK ENGINE BUT DONT HAVE THE BLUE/BLACK WIRE ON THE CLUSTER !!!! ----- I installed mine by running a wire through the car into the engine bay and splice into one of the coils (CYLINDER 2 WORK BEST) THEN FOLLOW THE VIDEO AS EXPLAINED FOR POWER + AND EARTH - ... THE SWITCH IS OPTIONAL AS YOU CAN GET A DIMMABLE TACHO LIKE I DID REMOVING THE NEED FOR THE SWITCH .. HOPE THIS HELPS ANYONE WHO CANT FIND THE BLUE/BLACK WIRE
ok what colour wire is it
and this is definitely for coilpacks not the ht wire coil things
what wire is it from the coil pack i have three wires or is ir all of them
it was the left (1st wire) for me@@ellyattmahn3770
Which wire mate from coil pack
1st wire mate , @@ellyattmahn3770
Very useful, thanks !
Your welcom
Followed exactly as got the same gauge. Powers on but no signal going the the gauge.
For me, it was easier just to swap the dash with one which has tacho.....10 min job, and no need to hassle with wires. Plug and play.
Cheers mate hopefully I'll get mine to work
No problem. Glad I could help
@@Autoshieldcars fitted mine and fully works mate must of been a bad ground I had before, cheers for fantastic video 👌
I followed this guide for my 1999 1.0 Dizzy and got everything working, light switch and power to rev counter, I just can’t find RPM signal on any of the wires.
I asked the question on a FB group, the response was to tap into red/yellow wire off distributor connector.
Hey mate did u find an answer for this?
I went straight to the green wire on distributor 👍🏻
@@andrewwilliams4940 no worries I’ve just realised mine is a coilpack 😂 can’t seem to get any of the wires to work will need to do some more research
I’ve done exactly what you said in the video and I’ve got the lights to work but the needle will not move when Erving ag all any help please 1.0 coil pack
I Got the same problem:/
@@johanvoetmand7689 have you sorted it ? If not I’ll tell you how to do it I’ve sorted mine
@@jamiethomas667 I’ve got the same issue how did you sort it?
Same issue here
@@stanlou4321 sorta sorted it now but when i put the clutch in it stops working
Grey and blue because as i play this for like 12 times i still see the Grey and blue wires no black and blue im lost
Anyone else help me with the wire i have to splice into on the coil pack engine i have individual coils there three wires not sure which one I have to splice to or is it all of them
which color is on the tachometer needle control. the one that gives the signal.thank you very much for the advice
Green as I remember
where does the red/signal wire go
Hello mate..im just curious.i has had a ecosport with coil pack aswell..i want to install a extra tachometer on my car.should i connect the green wire of tach to the wire of original tach of the car?i woried that maybe they going to show some warning on my dash board...pls help..thanks
If it’s a k11 micra then follow what I did in the video but I don’t know about other cars. So I don’t want to say something and it turns out wrong
@@Autoshieldcars mate from what i heard is you connect the green wire from tach to green and black wire from cluster wire..but its show on the video theres only one wire attach to the green and that is blue...everytime i try to tap my green wire to each one of wire from my cluster..there is only to wire that my tach has a source which they read incorrect like the white wire with stripe..the needle of the tach goes to the higher number and stay the light ..and the other one is brown wire with stripe which the reading is the needle is jumping all the time like craczy..but look i found that the 2 wire that has a reaction to the tach when i tao the wire has another wire that seperate with electrical tape ..and the other wire has the same..in all of my wire on my cluster..they have coupke of wire with partner..maybe i need to connect my green wire to both of the..i need to find which one..the white wirh stripe or the brown wirh stripe..thanks
I don’t know the mate. This video is designed specifically for coil pack k11’s as I don’t know for dizzy or the other micras so don’t want to say a wrong thing
Hello mate, i have a micra k11 1993 without the coil pack does it work the same ? Or do i have different wires ?
I’m not sure. But you could just take the cluster out and look if you have the green wire, same as this one?
@@Autoshieldcars .
any idea where to get the tacho singal from in micra k13 thanks
Hi I don’t I’m afraid, have a see if there’s a Haynes manual for it as that’s how we worked out mine
is it slow at all or?
What the tacho or the car?
@@Autoshieldcars tacho mate haha, I know the cars are slow 🤣🤣
@@leoncalton9330 well the needle was good enough. It revved up more or less In syncs with the car. I sold it nearly a year ago now so can’t say much more than that unfortunately
No worries then lad, thank you