Hello friends 👋 Please support me with LIKE, SHARE and SUBSCRIBE 😊 Thanks for watching If you liked it, please support me with LIKE, SHARE and SUBSCRIBE #diy #howtomake #homemade
The voltage from the transformer I played with was 800VOLTS! after you remove the secondary, that risk is gone, but with the new windings you instead have a high current (amps). There you have a risk of an arc burn than can hurt your eyes. Please be careful, and if you try to weld use a welders helmet
@@stevehenry1 no high voltage can damage both your eyes and it can also electrocute you badly and the plasma arcs have a large amount of ultraviolet radiation.
@@stevehenry1 and not only that the voltage he uses is only 1 volt and at this voltage it is impossible to create arcs and this voltage can be used for only spot welding and not arc welding and so it is impossible to damage the eyes.
@@manashsaha2312 yeah if you want to arc weld connect 2 heavy duty drill baterys be careful tho the fuses will burn out I personally bypassed the fuses on mine after burning it and melt stuff with graphite rods lol
This style of high voltage wood burning project has killed at least 50 people in a particularly horrific and agonizing way. These videos never indicate how dangerous the project is.
Two additional hints: 1) It would be a good idea to solder the high current twisted connections, or get some of the various compounds used by electricians for protecting high current connections from oxidation. The bare copper will oxidize from the heat generated by I^^2 x R losses and eventually burn up. 2) The bridge rectifiers used in the battery charger/jump starter are too small, only good for 25 amps each. Each MOT can produce 100 amps at 12 volts. And when paralleling such rectifiers you need some resistance in series to prevent one rectifier from 'hogging' the current. A better choice here would be one big Schottky full wave rectifier rated for 200 amps.. All in all, a good video. Recycling MOTs is a great idea with much potential (maniacal laughter).
Microwave transformers are terribly inefficient and overheat badly when powered up for any time. Also extremely dangerous to operate when the high voltage winding is left intact. All these "neat" projects are an accident waiting to happen!
Look at the timeline for 50 seconds. Note he/she/it is drilling towards his hand. Experienced people won’t do that. But what about a 13 yr old mind in a 21 year old body🧐🧐. They might drill and regret it
This will kill you instantly. I have watched it up to welding switcher and it drives me crazy. The microwave transformer has 10 000Volts with about 500mA. Connect several of them together use 240volt switch 7cm from the coil..... The sparking arch can jump up to 50cm to a wet grounded surface. That is absolutely lethal.
IN THE BEGINING OF THE VIDEO YOU SHOULD MAKE A FEW HOLES ON THE SIDE OF THE BOX SO WHEN USING THE FAN AIR CAN FLOW THRU THE HOLES AND OUT THE BOX BECAUSE THE WAY YOU HAVE IT IS NOT DOING MUCH.
Nice work. I've been seeing around these apartments a lot of microwaves getting thrown out. I figure.. I'm bored , retired and i've got a minor in engineering . Not electrical but i can fake that part cant i? Watch for a nationwide Power outage and remember me. I LIKE THAT SONG. Ill have to look it up. yes. THE VOLUME CONTROL WORKS BOTH WAYS PEOPLE. he isnt giving verbal instructions. mute it and listen to the voices like i sometimes do. I hope you've got a sense of humor dude. I get more humorless people with replys like this than you can even imagine. thanks for the video.
Now, were did these awesome background sounds come from? I'm a psytran fan, but this has a more profound and epic feeling! Very good indeed! What's this called??
A nice hack when playing with these transformer is to take a tape and wrap over pliers on the handle in order not to receive a good jolt when working with power on. When the spark almost seems to “jump” it can actually be quite painful and sometimes result in loss of taste for some foods for a time. Also smell. A good hack is also to wear a nice work glove when connecting anything that is energized also a nice sized rubber shoe will help to insulate you from a electrical jolt. Remember to always use caution
Dreadful music! No verbal or typed information. Tried using microwave transformers to save money on projects, but microwave transformers have such a bad temper when they get upset with someone tampering with them. Got one left, but too scared to plug it in, after the last one blew up nearly popping my ear drums. Have now ordered a pair of red/green colour blind correcting glasses.
Really? I Made spot welder machine with these transformers. It kinda worked but I wasn't happy about the result. I also tried to rewind the secondary to make a high current transformer but it get toooo hot I think i know why. But I didn't hear about these trans can blow up. It's too scary
That ventilator, that fan, it has not the least use there, while the air cannot flow while the case is totally closed. A couple of airholes in the sides or best in the bottomplate around the transformer are needed for a fan to work. And the same in that last idea. That coolprofiles are not yet 5% used with the rectifiers so screwed that way. Not to the flat side but only making a lesser thermal contact to some little areas on the side of the ribs. Wich are also screwed because now neither side can allow convection while screwed on to the bottomplate with not even a little airgap. Keeping half of a cm distance (with some washers or so beneath them) would at least allow them to work. So rectifiers must be screwed on to the flat side of the profiles, in that slit that's made for screwing the component on the flat side for some thermal contactsurface. And with washers beneath it air at least cán flow around most of the surface of the ribs. Its airflów that provides heatdrainage. Without that the component is there for nothing, the same as with the incapsolated fan at the beginning
Safety is job number one, no doubt about it. And not only is high voltage dangerous, but so is high current. Think about the consequences of getting a finger ring or watch band acoss the high current, low potential. Or worse yet, a nose ring!!!!
Yes, It´s terrible. But not only the first one - all of them are dangerous because of no safety and verry poor kind of worf. I name it the Hot-Glue-Mafia.
Yea there is actually, remember when he first hooked up the leads to the screws, well those screws were on one side of the box that was enclosing it, n from what I seen he burned right through that fucker..I’m mean correct me if I’m wrong
Ok do not ever use a MOT to make fractles. This is not new by any means and has killed many many people. It outputs 2000kv at around 200mah which is like 20x the needed amount to kill you at that voltage. If you do want to make this stuff use a flyback transformer. The issue with MOTs is they run at the same 60hrz frequency which works very well at jaring muscles like your heart. A flyback works at 30khrz to 40khrz
Exposed and dangerous connections, measurements for voltage and current without load, connecting transformers in parallel, without explaining why the wires are connected in such way for primary part and secondary side, using a fan to blow or suck air from or into a box without a secondary port for air circulation, wiring by few twists on screws and not clamps, rings, connectors designed to make a good connection and without the need to apply solder, and so on. This must be some tricks for amateur electrician, assuming he will be alive after performing them, taking into consideration the various connectors of such microwave transformers, high frequency types... Did some connections as a kid, but now I would never do that knowing what I know and how dangerous can be... This kind of videos are using Darwin law, if you know what I mean...
Throwing together a bunch of phrases does not help anyone. You seem to have some relevant knowledge, why don’t you explain for the rest of us what you mean? Stop being a “twisty, condescending...” whatever and contribute!
@@tc8533 Why? This isn't their channel. Your safety is your responsibility and yours alone. If people are too dim to recognize possible fatal safety issues, cool. There's too many idiots on this rock in the first place. They pointed out safety issues, what you do with it is up to you.
I chiseled out the secondary on one transformer in a hurry one winter as a waterpipe in the wall froze due to a cold snap and strong wind. Put a 1 turn secondary in it's place from an old jumper cable and clipping onto the tub spout and the toilet supply valve, thawed the pipe in the wall before it froze hard enough to break the pipe.
I was gonna say something about having a saw blade protrude an inch or more above the workpiece, but thank goodness you beat me to the punch! Please do not look into laser w/remaining eye!!
@@fredmetcalf 1st rule of using a table saw, use bare hands to feel, and absolutely NO loose clothing, DON'T be distracted, and keep your eyes on the task at hand! Let's just make it through one task at a time by paying attention. Great video!
Another point-The blade should not project thru the wood no more than quarter inch.So if you should slip-you won't get as seriously cut.For the crosscuts your saw needs miter guage slots on its table and a miter guage.I treat using a table saw as serious as using the wood chipper!
Have you ever put a large horse shoe magnet over a Christmas light bulb? I did it in 67 an engineer from NSP saw it he didn't even say anything at all to me but everyone in my class thought it was kind of neat. I was eleven years old.
felicitari pentru ca ,,ai salvat planeta'' Nu sunt de accord cu aparatul de sudura pentru ca produce tensiune reactiva in reteaua de alimentare cu energie electrica si palatesti mai multi bani la contorul electric.Mai bun cel cu regim de comutatie .Despre electrodul de carbune: sunt in industrie la cei ce curata ( craițuiesc sudurile electrice si defectele de pori din turnarea pieselor ) Sunt de acord cu sudura in puncte folosita occazional de catre amatori
Is that fan sucking or blowing? and in either case, WHERE IS THE AIR EXHAUST OR INTAKE?? If the close-up of the labels was your concession to safety, it really should have been on the 1st demonstration where the HT winding was still intact.. Take great care folks.
Brother you handle that table saw well.. but your blade is way to high.. to help to err on the side of caution make your blade about an 1/8 or less above the top of your materials.. nice trick.. very handy.. thanks.
The first project : I wish I knew the steps he was going through. Which was the primary and secondary? Where was the cooling fan getting its air from? What was the liquid he was painting and what was the purpose?
secondary has the smaller gauge windings. backing soda (soda bicarbonate) and water creates the conductivity path. he needed to put intake holes in for a more efficient fan.
Don't try it. Many people have been killed doing this kind of wood burning using micro wave transformers. Never use the existing secondary coils of these transformers ,smash them out and re wind with heavy gauge wire in order to do sensible and safe projects like spot welding or battery charging
spot welder failed because you actually need hardened copper for electrodes. helps a lot with better welds. also you are holding the spot welder on for too long. damaging the cells interior chem. 0.5sec's is max required.
@@BalkanHandyman i had the same problems when i built mine. i thought it was the low voltage or all other problems.. turns out it was my normal soft copper electrodes i used. tried tungsten. not advised. hardened copper now. and its perfect.
don't try to solder anything resting on pliers - the metal of the pliers will soak the heat away and the job will take longer . Rest the part on a piece of scrapwood instead.
Im not sure about the wire size but i know usually they have around 120 and 150 turns i have many of them and never had that problem. Good luck make sure the wire is very tight if you decide to fix it or is gonna vibrate.
Lol you solder crimp terminals? That's like wearing a belt and suspenders. And you went through the trouble of doing that, but taped the fan connections. Hilarious
High power transformer :) Get 12 gauge magnet wire and bend into 2 equal halves then use a drill and eye bolt to twist the wires. When done use this wire to rewrap the whole inside of transformer. When done wrapping ,,, cut inner wire connect inner wire to outer wire so you are left with 1 inner wire and 1 outer wire. Pulse this with a Bendini motor. Makes a great inverter when the transformer is hooked up to a plug ins strip. When wired up this way in the transformer it puts out MEGGA POWER. USE a small solar panel to run the motor. High Voltage.
I would not charge a battery using the bit at the end. Seems like a good way to ruin your car battery. No voltage regulation occurs coming straight out of those rectifiers. At least include a series power resistor to allow the current to drop as the battery reaches full charge...
When I was a teenager, my father made a battery charger from a scavenged transformer and some rectifiers. The output voltage was about the same. He hooked it up to the battery in his car to charge it, but when he saw the vigorous boiling of the battery acid, realised the charging current was way too high. He panicked a little and disconnected the battery leads without turning it off first. The resulting hydrogen explosion destroyed the battery.
@@BalkanHandyman gov will have all heads for this tech thay teach us that we always have loss but never talk about the converted gain we can make from eletromagnets if u convert all the wast thermal energy around you u can use it universally as energy u need a true sine wave bipolar like the power comp dose a true pure sinewave like a grid tie inverter once the signal is made the system will turn on and consume wast thermal energy from the environment and space around you... there is free energy but it comes from Universal thermal loss and converted into a gain. so a pole Transformer and a microwave Transformer have a common between each other u can take 2 microwave Transformer provide a pure sine wave grid tie inverter to it or a true bipolar sinewave that inter acts with nature in a perfect spherical motion like a flower of life.. if ur home provides this use it as a Source signal then u can simply stack the Transformers on top of eachother in correct fasion and note that the 1 wire on the Transformer must stay connected and the other disconnected your only useing 1 wire on the hi side .. so test ur self 2 microwave transformer stacked on top of eachother same face sides. one side 120 to the wall and the other 120 side to what u want to power and useing the Transformer just the way it came out the microwave with the wire attached causes the energy in its perfect spherical motion to converted wast thermal energy to amp for u hot to cold in to out... should look a bit nuts with u use a form of wireless energy but its interacting with the environment...this is my work a compilation of Otis car. Tesla. and many other very smart people nowadays i think i found the gate source and drainif this gets out to much that it works the power comp and mib will have our headsdont do this at home warning high voltage yet i cant stop u lol DO NOT TOCH THE CORES OR THE WIRES OK u will die make sure u dont touch the core if the hi wire is mounted to it u dont have to mount the hi on the core if u dont want u connect the 1 hi wire to the same side hi on the other transformer then the core should besafe to handle if nessary
@@BalkanHandyman gov will have all heads for this tech thay teach us that we always have loss but never talk about the converted gain we can make from eletromagnets if u convert all the wast thermal energy around you u can use it universally as energy u need a true sine wave bipolar like the power comp dose a true pure sinewave like a grid tie inverter once the signal is made the system will turn on and consume wast thermal energy from the environment and space around you... there is free energy but it comes from Universal thermal loss and converted into a gain. so a pole Transformer and a microwave Transformer have a common between each other u can take 2 microwave Transformer provide a pure sine wave grid tie inverter to it or a true bipolar sinewave that inter acts with nature in a perfect spherical motion like a flower of life.. if ur home provides this use it as a Source signal then u can simply stack the Transformers on top of eachother in correct fasion and note that the 1 wire on the Transformer must stay connected and the other disconnected your only useing 1 wire on the hi side .. so test ur self 2 microwave transformer stacked on top of eachother same face sides. one side 120 to the wall and the other 120 side to what u want to power and useing the Transformer just the way it came out the microwave with the wire attached causes the energy in its perfect spherical motion to converted wast thermal energy to amp for u hot to cold in to out... should look a bit nuts with u use a form of wireless energy but its interacting with the environment...this is my work a compilation of Otis car. Tesla. and many other very smart people nowadays i think i found the gate source and drainif this gets out to much that it works the power comp and mib will have our headsdont do this at home warning high voltage yet i cant stop u lol DO NOT TOCH THE CORES OR THE WIRES OK u will die make sure u dont touch the core if the hi wire is mounted to it u dont have to mount the hi on the core if u dont want u connect the 1 hi wire to the same side hi on the other transformer then the core should besafe to handle if nessary
Not enough windings looks like one and a half pet transformer you need more to get voltage up say 3 or 4 turns with 6mm cable that should spot weld better
@@BalkanHandyman Have you ever considered talking the viewer through the project with tips and advice or just info on where you got the pieces from or what would work as a substitute things of this nature?
FFS don't do that!! They're there to prevent over current and avoid overheating of the windings. The last thing any of the projects in this video need is less safety.
Hi i have a microwave transformer and secondary is removed and I'm using it as a step down transformer. But it get really hot during usage. Is it normal?
Love the idea but hate the music. It would be nice to have a verbal narration as you work instead of playing horrible music. Explain the why's and how's of the project and mix in a few jokes.
Yes,more dangerous, I made the wood burner 10 yrs. ago, a buddy liked it and built one,smoked a joint,turned on power, grabbed both electrodes..... lost 7 outta 10, and a huge burned out sternum when he finally hit the floor, when it overheated he could call 911 with the 3 that remained! Not the best for stoners
They say its safe practice that when working with high voltage to always work with one hand behind your back so the path of electricity wont flow through your heart if contacted with a hand and grounded with the other. But what should also be said is you should always wear pants when working with high voltage as well. Baked beans and sausage are only good from a grill.. damn things like a lightening rod...
Potresti avere molta più corrente da un trasformatore solo, semplicemente mettendo 3 spire di cavo da 25 mmq e non 2 spire di cavo 3 x 2,5 mmq come hai fatto!
That first project is lethal, thousands of volts and the only thing to limit the current would be failure of one of the windings. In other words just touching that wet board would probably kill you. It is a colossally stupid idea, don't do it.
I'd rather have my finger nails ripped out by pliers or visit the dentist and have multiple fillings with no anesthetic than listen to this. Probably more enjoyable to watch a recording of yourself and a dominatrix shoving something where it doesn't belong while you scream than this.
.....you could obtain a better striking/holding arc, if the pressure (volts) was increased to 48 or so......done this and can weld with .25 inch 7018 or 60 series rods...
@@Teknopottu I don't see any ads, nor will you if you use Adblock or Adblock+ All those content makers on welfare because of me, I won't sleep well. I also use the "I don't' care about cookies" Chrome extension to stop those annoying mandatory pop-ups, but I think that may just be a European thing.
@@ascher40 I use "RUclips Premium" 13€/month because I watch hours of youtube per day, also lots of music and mostly on my phone, so not a big investment given the content.
arc welder is not good unless u make the secondaries with very high temperature resistant cable, which is expensive,. Enough of a suitable gauge cable of this type to rewind say 2-3-4 MOTs=entry level combined MIG/TIG welder. MOT is good for spot welding only. As for charging the car battery - if ur that desperate to charge the battery, better take it off the car and bring it to a place where there is an available car battery charger. This way of charging car battery isn;'t god because voltage is to constant 13.3 or 14volts - capacitors do that job of smoothing out the voltagez.
Can you design a transformer project that can destroy this music? Still watching. I just tore down a microwave today and this pops up. Sonebody at RUclips must have seen me pricing new ones yesterday.
What fool wears gloves while using a table saw?????Also, haven't you figured out how to make a push stick instead of using your hands to push ;umber thru????
EXACTLY! I have seen the HORRIBLE result of a good friend stoopidly using gloves in a rotating machine: one of the the saw disc tooth catched the glove's textile, then the ENTIRE hand was instantly pulled across the saw disc, and he was left with a terrible injury across his entire wrist, fore arm and hand, probably in less than a tenth of a second.
Won't point out what lots have already pointed out, but in the end, the battery charger at 16.9VDC RMS can harm the battery because it can charge to over 24 volts. Don't believe me ? ? ? ? Put a capacitor across the two outputs. make sure it's rated for more than 36 volts. Read your final voltage and you'll see 24.038 VDC. Also, WOW! You figured out how to burn wood. And your spot welder ? ? ? ? Geez! Cooking the hell out of those batteries.
Very dangerous projects - do not try this at home unless you want to get electrocuted.
👏👏👏
The voltage from the transformer I played with was 800VOLTS! after you remove the secondary, that risk is gone, but with the new windings you instead have a high current (amps). There you have a risk of an arc burn than can hurt your eyes. Please be careful, and if you try to weld use a welders helmet
@@stevehenry1 no high voltage can damage both your eyes and it can also electrocute you badly and the plasma arcs have a large amount of ultraviolet radiation.
@@stevehenry1 and not only that the voltage he uses is only 1 volt and at this voltage it is impossible to create arcs and this voltage can be used for only spot welding and not arc welding and so it is impossible to damage the eyes.
@@manashsaha2312 yeah if you want to arc weld connect 2 heavy duty drill baterys be careful tho the fuses will burn out I personally bypassed the fuses on mine after burning it and melt stuff with graphite rods lol
This style of high voltage wood burning project has killed at least 50 people in a particularly horrific and agonizing way. These videos never indicate how dangerous the project is.
Two additional hints:
1) It would be a good idea to solder the high current twisted connections, or get some of the various compounds used by electricians for protecting high current connections from oxidation. The bare copper will oxidize from the heat generated by I^^2 x R losses and eventually burn up.
2) The bridge rectifiers used in the battery charger/jump starter are too small, only good for 25 amps each. Each MOT can produce 100 amps at 12 volts. And when paralleling such rectifiers you need some resistance in series to prevent one rectifier from 'hogging' the current. A better choice here would be one big Schottky full wave rectifier rated for 200 amps..
All in all, a good video. Recycling MOTs is a great idea with much potential (maniacal laughter).
Microwave transformers are terribly inefficient and overheat badly when powered up for any time. Also extremely dangerous to operate when the high voltage winding is left intact. All these "neat" projects are an accident waiting to happen!
As I understand it, many accidents have happened, including some deaths.
Look at the timeline for 50 seconds. Note he/she/it is drilling towards his hand. Experienced people won’t do that. But what about a 13 yr old mind in a 21 year old body🧐🧐. They might drill and regret it
This will kill you instantly. I have watched it up to welding switcher and it drives me crazy. The microwave transformer has 10 000Volts with about 500mA. Connect several of them together use 240volt switch 7cm from the coil..... The sparking arch can jump up to 50cm to a wet grounded surface. That is absolutely lethal.
IN THE BEGINING OF THE VIDEO YOU SHOULD MAKE A FEW HOLES ON THE SIDE OF THE BOX SO WHEN USING THE FAN AIR CAN FLOW THRU THE HOLES AND OUT THE BOX BECAUSE THE WAY YOU HAVE IT IS NOT DOING MUCH.
😁
STOP SHOUTING.
a fan on a box... no hole... so where is the air is supposed to run through...
It burns it's own hole within the first 3 minutes. Lol
@@AngryHybridApe 😂🤣😆
Nice work. I've been seeing around these apartments a lot of microwaves getting thrown out. I figure.. I'm bored , retired and i've got a minor in engineering . Not electrical but i can fake that part cant i? Watch for a nationwide Power outage and remember me. I LIKE THAT SONG. Ill have to look it up. yes. THE VOLUME CONTROL WORKS BOTH WAYS PEOPLE. he isnt giving verbal instructions. mute it and listen to the voices like i sometimes do. I hope you've got a sense of humor dude. I get more humorless people with replys like this than you can even imagine. thanks for the video.
👍
Ok . .
Now, were did these awesome background sounds come from? I'm a psytran fan, but this has a more profound and epic feeling! Very good indeed! What's this called??
With no audio explanation, around 5x speed, jumbled wires what I understood was experiments with low voltage, high current. Over all eyesore video
he doesn't seem to actually understand what he is doing most of the time.
He's a hack with limited knowledge.
A nice hack when playing with these transformer is to take a tape and wrap over pliers on the handle in order not to receive a good jolt when working with power on. When the spark almost seems to “jump” it can actually be quite painful and sometimes result in loss of taste for some foods for a time. Also smell. A good hack is also to wear a nice work glove when connecting anything that is energized also a nice sized rubber shoe will help to insulate you from a electrical jolt. Remember to always use caution
" a nice sized rubber shoe will help to insulate you from a electrical jolt." not with HV it won't.
This video should have a Warning Ad because there are many people who don't know anything about microwave transformers. "Curiosity killed the cat".
Dreadful music! No verbal or typed information. Tried using microwave transformers to save money on projects, but microwave transformers have such a bad temper when they get upset with someone tampering with them. Got one left, but too scared to plug it in, after the last one blew up nearly popping my ear drums. Have now ordered a pair of red/green colour blind correcting glasses.
😂😂😂
Really? I Made spot welder machine with these transformers. It kinda worked but I wasn't happy about the result. I also tried to rewind the secondary to make a high current transformer but it get toooo hot I think i know why. But I didn't hear about these trans can blow up. It's too scary
'Please do not try these at home unless you know what you are doing.'
👌
Specially the last one, the battery will explode if theres any sparks nearby.
That ventilator, that fan, it has not the least use there, while the air cannot flow while the case is totally closed. A couple of airholes in the sides or best in the bottomplate around the transformer are needed for a fan to work.
And the same in that last idea. That coolprofiles are not yet 5% used with the rectifiers so screwed that way. Not to the flat side but only making a lesser thermal contact to some little areas on the side of the ribs. Wich are also screwed because now neither side can allow convection while screwed on to the bottomplate with not even a little airgap. Keeping half of a cm distance (with some washers or so beneath them) would at least allow them to work. So rectifiers must be screwed on to the flat side of the profiles, in that slit that's made for screwing the component on the flat side for some thermal contactsurface. And with washers beneath it air at least cán flow around most of the surface of the ribs. Its airflów that provides heatdrainage. Without that the component is there for nothing, the same as with the incapsolated fan at the beginning
re the fan......... totally pointless unless you drill exit holes for the air that the fan pushed in - if it cant get out again - whats the point?
As an electronic engineer with a certificate in workplace safety, I can't begin tell you just how scary I think this is, particularly the first one.
I know 😉
Safety is job number one, no doubt about it. And not only is high voltage dangerous, but so is high current. Think about the consequences of getting a finger ring or watch band acoss the high current, low potential. Or worse yet, a nose ring!!!!
Yes, It´s terrible. But not only the first one - all of them are dangerous because of no safety and verry poor kind of worf.
I name it the Hot-Glue-Mafia.
@@barneylinet6602 Oh there are other rings worse than a nose ring.......
@@chrisyu98 OMG! what were you doing with that microwave transformer!!???
The fan’s a nice touch shame the air from it has nowhere to go!
Yea there is actually, remember when he first hooked up the leads to the screws, well those screws were on one side of the box that was enclosing it, n from what I seen he burned right through that fucker..I’m mean correct me if I’m wrong
Improper table saw usage ! DANGER !!!
Ok do not ever use a MOT to make fractles. This is not new by any means and has killed many many people. It outputs 2000kv at around 200mah which is like 20x the needed amount to kill you at that voltage. If you do want to make this stuff use a flyback transformer. The issue with MOTs is they run at the same 60hrz frequency which works very well at jaring muscles like your heart. A flyback works at 30khrz to 40khrz
Exposed and dangerous connections, measurements for voltage and current without load, connecting transformers in parallel, without explaining why the wires are connected in such way for primary part and secondary side, using a fan to blow or suck air from or into a box without a secondary port for air circulation, wiring by few twists on screws and not clamps, rings, connectors designed to make a good connection and without the need to apply solder, and so on.
This must be some tricks for amateur electrician, assuming he will be alive after performing them, taking into consideration the various connectors of such microwave transformers, high frequency types...
Did some connections as a kid, but now I would never do that knowing what I know and how dangerous can be... This kind of videos are using Darwin law, if you know what I mean...
👏👏👏
Twisty, condescending ass wipe springs to mind 😂😂
Throwing together a bunch of phrases does not help anyone. You seem to have some relevant knowledge, why don’t you explain for the rest of us what you mean? Stop being a “twisty, condescending...” whatever and contribute!
@@tc8533
Why?
This isn't their channel.
Your safety is your responsibility and yours alone.
If people are too dim to recognize possible fatal safety issues, cool.
There's too many idiots on this rock in the first place.
They pointed out safety issues, what you do with it is up to you.
Came here to say exactly all of that. Thank you. Hopefully the O.P. uses that as a study guide.
Very nice
I've got 3 things to say . Amazing! Amazing ! & Amazing!!🙏☺️
Ah, a high efficent death trap and a good akku-boiler. Well done!
How does a fan going keep it cool, if there no inlet hole, for air to get in
very easy 💪
I chiseled out the secondary on one transformer in a hurry one winter as a waterpipe in the wall froze due to a cold snap and strong wind. Put a 1 turn secondary in it's place from an old jumper cable and clipping onto the tub spout and the toilet supply valve, thawed the pipe in the wall before it froze hard enough to break the pipe.
i don't know about you guys but i'm standing in the ocean, staring down the barrel waiting for the final gates to open LOL
😁
@@BalkanHandyman
LOL... couldn't help myself
😂😂😂
Going to my stepbrother's funeral this weekend after he watched videos like this.
very creative and clever. like the way you built it.
Fan with no vents are kinda pointless, don't ya think?
👌
Music made me feel like I was dj at the Taj Mahal
I believe you need rectification to make the stick welding work.
Amazed you've still got 10 fingers or haven't drilled through your own hand...
😂😂😂
I was gonna say something about having a saw blade protrude an inch or more above the workpiece, but thank goodness you beat me to the punch!
Please do not look into laser w/remaining eye!!
@@wayngoodman5889 and gloves!
X Ray burns?
You run a saw with rubber gloves but spread glue with your bare hands.
😁😁😁
when are you going to show us the NEW things to do with a microwave transformer?
very soon 😉
@@BalkanHandyman 1a
Ahaha
Siga ruclips.net/video/j2AZ7tH64IU/видео.html
Siga
ruclips.net/video/j2AZ7tH64IU/видео.html
Interesantno! Svaka ti cast :)
hvala
Pričaš Srpski?
please, how to connect the transformers "220v side" thank you
Ya killed that battery tab didn't ya lol
You should always use a stick to push the wood through the electric saw. That was scary to watch, you will end up with no fingers doing it like that.
I buy a new Table Saw with push stick 🤪
@@BalkanHandyman Never use gloves near a table saw......I don't stick on safety, but this is IMPORTANT.....
@@fredmetcalf 1st rule of using a table saw, use bare hands to feel, and absolutely NO loose clothing, DON'T be distracted, and keep your eyes on the task at hand! Let's just make it through one task at a time by paying attention. Great video!
thats the least of his problems cutting wood on its side on a table saw is the easiest way to lose a hand
Another point-The blade should not project thru the wood no more than quarter inch.So if you should slip-you won't get as seriously cut.For the crosscuts your saw needs miter guage slots on its table and a miter guage.I treat using a table saw as serious as using the wood chipper!
Good to see im not the only one who solders crimp connectors haha
Have you ever put a large horse shoe magnet over a Christmas light bulb?
I did it in 67 an engineer from NSP saw it he didn't even say anything at all to me but everyone in my class thought it was kind of neat. I was eleven years old.
Along with the likes icon there should be a deaths icon to have a counter for how many people die because of RUclips vids.
lol
felicitari pentru ca ,,ai salvat planeta'' Nu sunt de accord cu aparatul de sudura pentru ca produce tensiune reactiva in reteaua de alimentare cu energie electrica si palatesti mai multi bani la contorul electric.Mai bun cel cu regim de comutatie .Despre electrodul de carbune: sunt in industrie la cei ce curata ( craițuiesc sudurile electrice si defectele de pori din turnarea pieselor ) Sunt de acord cu sudura in puncte folosita occazional de catre amatori
make sure that you bought a fan when you ae using transformer because there are heating when you power it up and
😁
Project 1: fan has nowhere to blow. Drill holes in opposite wall.
ok
Is that fan sucking or blowing? and in either case, WHERE IS THE AIR EXHAUST OR INTAKE??
If the close-up of the labels was your concession to safety, it really should have been on the 1st demonstration where the HT winding was still intact.. Take great care folks.
sucking
Yep, very dangerous. Hopefully nobody gets hurt doing these.
34 people in america alone have died using these for woodworking projects
So what did you actually make i don't get it.
Waste of 20 minutes
😮
Cool
Brother you handle that table saw well.. but your blade is way to high.. to help to err on the side of caution make your blade about an 1/8 or less above the top of your materials.. nice trick.. very handy.. thanks.
thanks for watching 😁
I think that is about the most repulsive music I have ever heard!
i will remove that music 😜
The music is okay. Repeating it for the duration of video is not.
I liked it.
A whole new level of deadly is OK, but You Tube will shut you down for saying the wrong word!
The first project : I wish I knew the steps he was going through. Which was the primary and secondary? Where was the cooling fan getting its air from? What was the liquid he was painting and what was the purpose?
🤔🤔🤔
He removed the secondary. Fan got it's power from input he connects, I think 12V. He was using water and baking soda.
secondary has the smaller gauge windings. backing soda (soda bicarbonate) and water creates the conductivity path. he needed to put intake holes in for a more efficient fan.
Don't try it.
Many people have been killed doing this kind of wood burning using micro wave transformers.
Never use the existing secondary coils of these transformers ,smash them out and re wind with heavy gauge wire in order to do sensible and safe projects like spot welding or battery charging
you need lessons on how to use a saw table my friend before you amputate your hands or worse.....
lol 😂😂😂
@@BalkanHandyman just dont want you cutting off your hands!!
Is that fan just to pressurised the box?
😜
spot welder failed because you actually need hardened copper for electrodes. helps a lot with better welds. also you are holding the spot welder on for too long. damaging the cells interior chem. 0.5sec's is max required.
ok
@@BalkanHandyman i had the same problems when i built mine. i thought it was the low voltage or all other problems.. turns out it was my normal soft copper electrodes i used. tried tungsten. not advised. hardened copper now. and its perfect.
😁
don't try to solder anything resting on pliers - the metal of the pliers will soak the heat away and the job will take longer . Rest the part on a piece of scrapwood instead.
Wow, so many moaners here in the comment section. Thanks for sharing bro, im interested in microwave transformers so for me its a great watch
Spot on all the people who have bought the nanny state ideology, they would still be doing a JHA!
Cool video
thanks 😁
I accidentally cut out the primary on 2 of my mots. Would I be able to rewire the primary. If so which gauge wire and how many turns would be needed.
sory but no possible
Im not sure about the wire size but i know usually they have around 120 and 150 turns i have many of them and never had that problem. Good luck make sure the wire is very tight if you decide to fix it or is gonna vibrate.
👏👏👏
I don’t know anything about electronics outside of house wiring. I liked it and the music too 👍🏻.
thanks
Great stuff. There is nothing worse than being bored. And you got it cracked with these projects.
👏😁
Being bored is the mother of all inventions
Lol you solder crimp terminals? That's like wearing a belt and suspenders. And you went through the trouble of doing that, but taped the fan connections. Hilarious
High power transformer :) Get 12 gauge magnet wire and bend into 2 equal halves then use a drill and eye bolt to twist the wires. When done use this wire to rewrap the whole inside of transformer. When done wrapping ,,, cut inner wire connect inner wire to outer wire so you are left with 1 inner wire and 1 outer wire. Pulse this with a Bendini motor. Makes a great inverter when the transformer is hooked up to a plug ins strip. When wired up this way in the transformer it puts out MEGGA POWER. USE a small solar panel to run the motor. High Voltage.
I would not charge a battery using the bit at the end. Seems like a good way to ruin your car battery. No voltage regulation occurs coming straight out of those rectifiers. At least include a series power resistor to allow the current to drop as the battery reaches full charge...
👍
When I was a teenager, my father made a battery charger from a scavenged transformer and some rectifiers. The output voltage was about the same. He hooked it up to the battery in his car to charge it, but when he saw the vigorous boiling of the battery acid, realised the charging current was way too high. He panicked a little and disconnected the battery leads without turning it off first. The resulting hydrogen explosion destroyed the battery.
Even a resistor wouldn't help, the charge of the battery with that design would go above 23v, it needs a regulator.
@@BalkanHandyman gov will have all heads for this tech thay teach us that we always have loss but never talk about
the converted gain we can make from eletromagnets
if u convert all the wast thermal energy around
you u can use it universally as energy u need a true sine wave bipolar like the power comp dose a
true pure sinewave like a grid tie inverter
once the signal is made the system will turn on and
consume wast thermal energy from the
environment and space around you... there is free energy but it comes from Universal thermal loss and converted into a gain. so a pole Transformer and a
microwave Transformer have a common between each other u can take 2 microwave Transformer provide
a pure sine wave grid tie inverter to it or a true bipolar sinewave that inter acts with nature in
a perfect spherical motion like a flower of life.. if ur home provides this use it as a Source
signal then u can simply stack the Transformers on top of eachother in correct fasion and note
that the 1 wire on the Transformer must stay connected and the other disconnected your only useing
1 wire on the hi side .. so test ur self
2 microwave transformer stacked on top of eachother same face sides. one side 120 to the wall and the other 120 side to what u want to power and useing the
Transformer just the way it came out the microwave with the wire attached causes the energy in its
perfect spherical motion to converted wast thermal energy to amp for u hot to cold in to out...
should look a bit nuts with u use a form of wireless energy but its interacting with the environment...this is my work a compilation of Otis car. Tesla. and many other very smart people nowadays i think i found the gate source and drainif this gets out to much that it works the
power comp and mib will have our headsdont do this at home warning high voltage yet i cant stop u lol DO NOT TOCH THE CORES OR THE WIRES OK u will die make sure u dont touch the core if the hi wire is mounted to it u dont have to mount the hi on the core if u dont want u connect the 1 hi wire to the same side hi on the other transformer then the core should besafe to handle if nessary
@@BalkanHandyman gov will have all heads for this tech thay teach us that we always have loss but never talk about
the converted gain we can make from eletromagnets
if u convert all the wast thermal energy around
you u can use it universally as energy u need a true sine wave bipolar like the power comp dose a
true pure sinewave like a grid tie inverter
once the signal is made the system will turn on and
consume wast thermal energy from the
environment and space around you... there is free energy but it comes from Universal thermal loss and converted into a gain. so a pole Transformer and a
microwave Transformer have a common between each other u can take 2 microwave Transformer provide
a pure sine wave grid tie inverter to it or a true bipolar sinewave that inter acts with nature in
a perfect spherical motion like a flower of life.. if ur home provides this use it as a Source
signal then u can simply stack the Transformers on top of eachother in correct fasion and note
that the 1 wire on the Transformer must stay connected and the other disconnected your only useing
1 wire on the hi side .. so test ur self
2 microwave transformer stacked on top of eachother same face sides. one side 120 to the wall and the other 120 side to what u want to power and useing the
Transformer just the way it came out the microwave with the wire attached causes the energy in its
perfect spherical motion to converted wast thermal energy to amp for u hot to cold in to out...
should look a bit nuts with u use a form of wireless energy but its interacting with the environment...this is my work a compilation of Otis car. Tesla. and many other very smart people nowadays i think i found the gate source and drainif this gets out to much that it works the
power comp and mib will have our headsdont do this at home warning high voltage yet i cant stop u lol DO NOT TOCH THE CORES OR THE WIRES OK u will die make sure u dont touch the core if the hi wire is mounted to it u dont have to mount the hi on the core if u dont want u connect the 1 hi wire to the same side hi on the other transformer then the core should besafe to handle if nessary
Lol....thats a STICK welder alright... ;)
Such dodgy connections😂. Great vid anyways.
😂😂😂
Sus videos son excelentes, usted en sus videos uniendo dos transformadores de microondas, ha hecho un transformador aislador? Muchas gracias.
thanks
Not enough windings looks like one and a half pet transformer you need more to get voltage up say 3 or 4 turns with 6mm cable that should spot weld better
great idea ... tell me where you found this background music, thanks
on RUclips
@@BalkanHandyman
Oooooooooooo
ruclips.net/video/yJg-Y5byMMw/видео.html
@@BalkanHandyman Have you ever considered talking the viewer through the project with tips and advice or just info on where you got the pieces from or what would work as a substitute things of this nature?
The Song Is Called Mortals By Laura Brehm And Warriyo.
Take the shunts out my friend and you will have more power!
FFS don't do that!! They're there to prevent over current and avoid overheating of the windings. The last thing any of the projects in this video need is less safety.
Sorry I had to change it halfway through I couldn't handle the music
just turn off the music 😟
Hi i have a microwave transformer and secondary is removed and I'm using it as a step down transformer. But it get really hot during usage. Is it normal?
Love the idea but hate the music. It would be nice to have a verbal narration as you work instead of playing horrible music. Explain the why's and how's of the project and mix in a few jokes.
If you could come up with a few ideas that are less useful and more dangerous I'll subscribe.
😂😂😂
I know it's been done before, but how about a MOT Tesla coil.
Interested in 👍
Yes,more dangerous, I made the wood burner 10 yrs. ago, a buddy liked it and built one,smoked a joint,turned on power, grabbed both electrodes..... lost 7 outta 10, and a huge burned out sternum when he finally hit the floor, when it overheated he could call 911 with the 3 that remained! Not the best for stoners
They say its safe practice that when working with high voltage to always work with one hand behind your back so the path of electricity wont flow through your heart if contacted with a hand and grounded with the other. But what should also be said is you should always wear pants when working with high voltage as well. Baked beans and sausage are only good from a grill.. damn things like a lightening rod...
operating Table saws use push stick you will save your fingers
Potresti avere molta più corrente da un trasformatore solo, semplicemente mettendo 3 spire di cavo da 25 mmq e non 2 spire di cavo 3 x 2,5 mmq come hai fatto!
I am not sure if I will get the Microwave Oven back together again before dinner.
That first project is lethal, thousands of volts and the only thing to limit the current would be failure of one of the windings. In other words just touching that wet board would probably kill you. It is a colossally stupid idea, don't do it.
I'd rather have my finger nails ripped out by pliers or visit the dentist and have multiple fillings with no anesthetic than listen to this.
Probably more enjoyable to watch a recording of yourself and a dominatrix shoving something where it doesn't belong while you scream than this.
I hate to say it but I've built all of this stuff years ago. Nothing new really. Good wood workmanship though.
👍
Glenn Krieger @ Shame you have not invented or patented anything tho,hurry up chop,chop!
.....you could obtain a better striking/holding arc, if the pressure (volts) was increased to 48 or so......done this and can weld with .25 inch 7018 or 60 series rods...
Hope you make a lot of money on this , #RUclips has no doubt with ONLY 8 advertisements in a 22 min video.
8 it was.....
awesome video. RUclips blows though I swear there was an ad every 2 minutes.
every 2 min, that is crazy 😁
Video maker can decide how much adds there is per video. More adds, more money for the maker, and that is not crazy.
@@Teknopottu I don't see any ads, nor will you if you use Adblock or Adblock+ All those content makers on welfare because of me, I won't sleep well.
I also use the "I don't' care about cookies" Chrome extension to stop those annoying mandatory pop-ups, but I think that may just be a European thing.
I use 'Brave' ....havent seen a RUclips Ad for months now!! I recommend it.
@@ascher40 I use "RUclips Premium" 13€/month because I watch hours of youtube per day, also lots of music and mostly on my phone, so not a big investment given the content.
how is this guy not dead lol
😡😡😡
Nothing new at all. But I'm concerned about the very sloppy workmanship. One day your house is going to burn down.
I really wish I could replicate this, but have no idea i need explanation. But maybe it's a good thing because I would probably blow up
🤣🤣🤣
arc welder is not good unless u make the secondaries with very high temperature resistant cable, which is expensive,. Enough of a suitable gauge cable of this type to rewind say 2-3-4 MOTs=entry level combined MIG/TIG welder. MOT is good for spot welding only.
As for charging the car battery - if ur that desperate to charge the battery, better take it off the car and bring it to a place where there is an available car battery charger. This way of charging car battery isn;'t god because voltage is to constant 13.3 or 14volts - capacitors do that job of smoothing out the voltagez.
you should make the booth like the futurama episode. just with a mot instead of circular saws.
Can you design a transformer project that can destroy this music? Still watching. I just tore down a microwave today and this pops up. Sonebody at RUclips must have seen me pricing new ones yesterday.
What fool wears gloves while using a table saw?????Also, haven't you figured out how to make a push stick instead of using your hands to push ;umber thru????
EXACTLY! I have seen the HORRIBLE result of a good friend stoopidly using gloves in a rotating machine: one of the the saw disc tooth catched the glove's textile, then the ENTIRE hand was instantly pulled across the saw disc, and he was left with a terrible injury across his entire wrist, fore arm and hand, probably in less than a tenth of a second.
So many commercials I missed the show!
thanks for putting this up , brilliant starting point , very informative , thank you
Dropped off because too many commercials ... bye!
That last hack is a great way to blow up the car electronics and battery. There would be a good 20 volts coming out of that one..
😁
I made an upgrade with my sunko but the current drops, that is why i made this upgrade to increase the current output of the transformer. @
👌
Won't point out what lots have already pointed out, but in the end, the battery charger at 16.9VDC RMS can harm the battery because it can charge to over 24 volts. Don't believe me ? ? ? ? Put a capacitor across the two outputs. make sure it's rated for more than 36 volts. Read your final voltage and you'll see 24.038 VDC.
Also, WOW! You figured out how to burn wood. And your spot welder ? ? ? ? Geez! Cooking the hell out of those batteries.
Right
The hilti drill is a huge flex.