Thank you so much sir ji. All credit goes to you. You allowed me to do all this, with you I couldn’t have done it. Aapki video bhi main aaj shaam tak bhejta hu sir. Sorry for the delay. 🙏🏻😀
@saicharan8309 bhai, thank you so much ☺️ share karna yaar koi bhi ESM se blogger nahi hai especially engine department se and I want to build a community ☺️☺️
Bhaiya just to be clear, aapke jaise engineer banne ke lie phle mujhe apna 12 ache se dena hoga , fir koi v collage se btech mechanical mn krna hoga 4 yrs ,fir 1 year ka GME krna hoga from collages like SIMS ,and Anglo. Bhaiya if u will clear this it will be big relief. :)
You are smart bro. You have a clear idea what to do and what not to do. So do not worry about the results. Just keep going and I am pretty much sure that you are going to make it. Chahe koi bhi field ho.
Hey 3 saab, ye jo apna sewage vacuum pump hota in STP, ye postitive displacement pump hota h ya centrifugal and why so and if positive displacement, then usme kon sa wala pump hai ?
Positive displacement toh yaar maine dekha nahi hai abhi tak.. woh mostly gear type ya roller type hote hain.. which I haven’t seen till now. But I will ask my seniors..
Bhai when you are out at sea you can discharge overboard. When you are near land 12nm or in port.. you cannot discharge anything outside the ship. It has to be stored in sewage holding tanks.
No bro, technically we cannot do that.. because annex IV states that “No discharge of untreated ship's sewage into the sea (MARPOL Annex IV) if it is discharged from a holding tank approved by the administration with a moderate rate of discharge and the ship is en route with a minimum speed of 4 knots and not less than 12 nautical miles from the nearest land”
Very informative vedio for new aspirants
Love from pakistan 😍
Thank you so much bro. Means a lot. 🥹🥹🥹
This video redefines excellence. Pure brilliance from start to finish.
Thank you so much bhai 😍😍😍
going forward, wishing you all the best for your 2nd engineer duties in future , all the best 🎉
Thank you so much sir ji. All credit goes to you. You allowed me to do all this, with you I couldn’t have done it. Aapki video bhi main aaj shaam tak bhejta hu sir. Sorry for the delay. 🙏🏻😀
nice video❤
Thank you so much bhai. Means a lot. 😀😍😍
Very informative video thanks I am 3E from Pakistan🇵🇰.
Thank you bro. Thank you so much. Do share it with your friends. 😀🙏🏻
amazing...
Thank you so much. ☺️☺️☺️
awesomeee!! watching from SIMS G35
Thanks mate. Welcome to esm. And do share this with your friends 😍😍😍
@@PKSFILMS19 😁 sure...we all watch ur videos together in d class on the projector
@saicharan8309 bhai, thank you so much ☺️ share karna yaar koi bhi ESM se blogger nahi hai especially engine department se and I want to build a community ☺️☺️
@saicharan8309 wow. You just made my day bro. 🥹🥹 this is what I want. 🥹🥹🙏🏻
Bhaiya just to be clear, aapke jaise engineer banne ke lie phle mujhe apna 12 ache se dena hoga , fir koi v collage se btech mechanical mn krna hoga 4 yrs ,fir 1 year ka GME krna hoga from collages like SIMS ,and Anglo. Bhaiya if u will clear this it will be big relief. :)
You are smart bro. You have a clear idea what to do and what not to do. So do not worry about the results. Just keep going and I am pretty much sure that you are going to make it. Chahe koi bhi field ho.
Abe direct b tech Marine engineering krna
Nice.....❤❤
♥️
🎉
Thank you so much bro. Means a lot. Thank you for watching this video. 😀😀
@@PKSFILMS19 hats off to you 3 Saab creating such a amazing video by taking out time from your busy schedule.🙏
@anuppatilmn2947 bro you just made my day. 🥹🥹🙏🏻 this means a lot.
❤
Thank u so much bhai 😀😀😍
Ap log ek he jaga pa hoty ho yeh travel krty ho?
Travel karte hain bhai
Hey 3 saab, ye jo apna sewage vacuum pump hota in STP, ye postitive displacement pump hota h ya centrifugal and why so and if positive displacement, then usme kon sa wala pump hai ?
Bhai centrifugal use hota hai most of the type because of low maintenance and zyada space bhi Nhi leta hai.
Positive displacement toh yaar maine dekha nahi hai abhi tak.. woh mostly gear type ya roller type hote hain.. which I haven’t seen till now. But I will ask my seniors..
Okk sir, thanks for answering, and if u got confirm here, please revert back. Thanks again 🙏 🙏
And what is the discharge pressure sir of this sewage vacuum pump, that we maintain ?
@ashishmishra2144 sure man. I will get back to you.
Salary slip
Hahaha 😂😂 bhai woh bhi dikha dunga
Ye log apni wife ke sath kab rehte hain
Jab ghar wapas aa jaate hain tab
@@PKSFILMS19Mean k ye apni family k sth nhi rehty travel krty rehty ha??? Or katny Months bd aty ha ghr?
@@aiouhelpline9110 depend karta hai agar aap chaho toh family ke saath travel kar sakte ho
@@aiouhelpline9110 yeh bhi rank par depend karta hai .. senior ranks 3-4 months and junior officers and engineers 6 months and crew 8-9 months
Hey 3 saab, hm jab STP backwashing by air or SW krte hain during to, sludge hm kahan daalte hain, overboard ya grey water tank ?
Bhai when you are out at sea you can discharge overboard. When you are near land 12nm or in port.. you cannot discharge anything outside the ship. It has to be stored in sewage holding tanks.
shall not be discharged instantaneously but at a moderate rate when the ship is en-route and proceeding at not less than 4 knots
So, it means, if ship speed > 4 knots then we can discharge backflush sludge of sewage during sailing to OVERBOARD , right ?
@@PKSFILMS19 And one more thing sir, what is the function of oil present in oil glass of air blower, like why we should check oil level ?
No bro, technically we cannot do that.. because annex IV states that “No discharge of untreated ship's sewage into the sea (MARPOL Annex IV) if it is discharged from a holding tank approved by the administration with a moderate rate of discharge and the ship is en route with a minimum speed of 4 knots and not less than 12 nautical miles from the nearest land”
❤
😃🙏🏻🙏🏻🙏🏻