Copper wire separation (Do It Yourself) Vibrating Screen
HTML-код
- Опубликовано: 12 сен 2024
- Its been five years since I uploaded my Videos. So I think its time to show a few updates.If anyone has a question you are more than welcome to ask in the comments below.
Amazing. We just started building our own system from scratch. These companies want a few hundred thousand dollars for the setup we need. Right now I'm up to $3,000 total on building my own. Thanks for the tip and great video!
Good luck with your build and your welcome to ask questions if you need any advice
Nice man how did it go?
So how is the progress with project?
@@bbbruh8809 honestly not good. I went thru months upon months of work. Built all our own stuff. Nothing was working correctly. Redid it all, tried again. Still couldn't get it running efficiently. Finally bit the bullet and bought a new MG150 wire plant.
80 percent great
thankyou
Thanks. You are more valuable than copper. Thanks again for the info.
Allen,its people like you and your comment that makes it worthwhile for me to do these videos,thankyou very much.
Thanks for sharing knowledge, knowledge is the most expensive and he who shares it is the greater
Thankyou for your kind comment and good luck with your scrapping.
Nice screen. A very good prototype. It's probably about time with all your research that you've put into to try to produce a commercial product. Go to one of the companies and show, after you've applied for patents. There's a lot of scrappers out there who'd love one of those machines.
Beautiful sound of free enterprise
Blimey, bet your neighbours love you
what does it matter ...........6:00 am till what ever time one can pursue a living ...........besides if your eyes cross my property line , this means you're raping my land ..............GOT IT ? ; ) good day .
@@ulfhenarpolymathmilitant6258 love that analogy!
Nobody should live so close to their neighbor. We live in Arizona for a reason! Open land!
@@ulfhenarpolymathmilitant6258 alah akba
You are the best!
Wow! Absolutely brilliant!!!! Thank you for sharing!!! I’m impressed!!! Please make more videos!
Thank you for your kind comment and well done for being first.Yes I will try and find the time to make more videos.
I am also doing this, looking forward to the communication
Thats good,make a video of your system,I would like to see it.
Nice work in your recycling.
If you only ever scrap wire would be a lot easier to keep wires full length and just make an automated wire stripped couple of blades opposing each other with a couple of pin wheel rollers to feed and pull it through. Not sure if spring tension would do all sizes of wire but wouldn't be hard to make it adjustable.
Yes wire strippers are good if you have long lengths of thick wire but I mostly do wiring looms from cars.car looms are mostly made from short and thin wires.Granulation is a lot quicker, but if I did not have a granulator I would strip wire by hand. The only thing I wouldnt do is weigh it in with the insulation still on. Thanks for your comment.
Sir..i am your great admirer from leicester..i too am spending a lot time on research..first i have made a water stirrer to get copper from bottom but it contains some impurities of wire with copper settling at bottom, and cant afford drying of plastic and copper, natural drying makes copper dark..i tried vibrating screen but it also gives some impurity and production is so slow bcas wire keeps tangling in screen after few minutes..as well as noisy for backyard project..tried to put a fan under vibrating screen to get plastic one side but no result..finally i am trying it by eddy current on conveyor belt but particles are too small to induce eddy current, i am trying both eithe repel it by henz law or attract it by Leoanrd R. crow theory of magnetise non ferrous metal.thats the only way to separate all steel, brass, plastic and copper in one operation.. i can now separate steel impurity.. can i meet you sometime with my project plz..thx.
sounds like you have been busy trying a lot of things,I too have tried dry separation but found it harder and more complicated than water separation,you need to design your system taking into account,how much space you have,how much noise you can make,what type of wire you want to separate,how many kilo of wire you want to produce per year.
My system is designed for car looms to be separated at home in my garage,I did not want it to take up a lot of floor space so I designed it to fit up against one wall.
The water separation I use washes all the small particles and dirt away and most of the larger pieces of plastic away,when I remove the copper from the aluminium tray I leave the water running and drag the copper up to the black plastic part of the water chute which gives it a final clean before removal.
The copper is now put on the drying trays(look at my drying video),this year from late spring onwards I have used the larger trays in my garage just stacked next to the door to get the sunlight and breeze and by the end of this year I will have dried about 900 kgs of copper granules without spending any money on heating.
Yes your right the vibrating screen is noisy and slow,so i will be trying to improve it in the future,but this year it has done a good job removing the larger pieces of plastic and dust to make clean copper granules.
Could you tell me what size screen you are using in your granulator and what type of wire you are doing? make a video and post it on youtube it would be a lot easier to give you advice if I could see your system.
Good job! End product is very clean...
Thanks for your comment.
Great job sir, feels amazing to watch this... Can you please explain the concept of BEND and also how did you make that bend..and what do you mean by "you have used slotted process in making bend and not glued it together" ...I am confused on this part, plz explain it in detail...Thank you
You are doing great! Like the videos!
Cheers mate,its good to see your still watching my videos.
thtas a cool alternative to a water sluece and could be used easily in winter. your idea of an off center weight. do you think one on a box fan would work well as the base?
Hello Ken,yes it could be an alternative to a water system but I think it needs more development,at the moment the water system has a better yield.I like my fan to be separate from the vibration and movement.The next thing I want to try is,instead of using the noisy vibrating table,run the screen backwards and forwards on rollers powered by a recip saw and I think that would make it quieter.Have you got any suggestions for what you would like to see in future videos? Thanks for your comment.
@@corsagafa i was wondering if the screens were interchangable for finer seperation. your page is awesome and i have more too delve into
@@kentieber7309 Yes its quite easy to change the screen,not so easy to get different sizes.
Thank you for sharing. I wish I had a granulator. Or knew how to build one.
I hope you get one someday,Good luck with your scrapping.
Thanks for the videos they are full of great ideas which I hope to put to the test .👍will offer any ideas I have if I come up with any variations that prove useful
Yes it would be good to hear about your setup and progress,its not often I get comments from people that are separating copper,just from people that want to do it.Even better make some videos.Thanks for your comment.
Class that
Hi Dawn,thanks for your kind comment
How does it work? Aren't the copper granulates and the plastic the same size?
Hello Kurt, I use a 2.5mm screen in the Granulator so we can say that the granules are from 0.2 mm to 2.5mm. This vibrating screen has now got a hole size of 1.5mm so any granules above 1.5mm will go back through my system. Also this vibrating screen has air blown up through the screen so imagine you have two granules the same size,one is plastic and one is copper. The copper granule will be heavier, the air blowing up through the holes will be strong enough to stop the plastic falling through the holes but the copper granule will be heavy enough to fall through the holes, also even if the plastic granule is bigger, it will have more surface area so it will be affected more by the air just like the wing on an airplane.Hope this helps and thanks for your question.
@@corsagafa thank you very much for your answer. Makes prefect sense.
hi just come across your vid very intersting some thing different from the norm do you sell your end product to the mills or the scrap yards and have you thought about making copper nugets very interested to see more of your vids soon thanks
Hi,I mostly save the copper granules that I produce as an investment,but I have sold some to a scrap yard that also granulates and makes there own ingots.Its just the same as selling any scrap,you need to find a yard that gives you the best price.The trouble with making ingots is that you lose weight through oxidisation and it costs money for the fuel and furnace.Scrap yards will be suspicious of what is in the ingot,although they do seam to sell for a good price on ebay.Yes I have more videos so have a look and thanks for your comment.
cheers thanks for your repley looking foward to your next vids
Well I'm trying to build a vibrating table to do my copper and I'm wondering what to use for what materials to use and the size of screen material or just want information about the whole system how it works I would appreciate it thanks
Hello Todd,most of the copper I do is from cars which is thin wire,so maybe my setup will not work as well on different sizes of wire?But my granulator screen size is 2.5mm and my vibrating screen size is 1.5mm.My advice is to watch as many videos as you can and keep asking questions to get as much info as you can.One thing is for sure! on my system is that all the different parts are like a team,all the members of the team play and work together and if they all work together,you will get a good result.You cant just expect one part of your team to play on there own and win.My team starts with the Granulator,water sluice,water filter,drying the copper and then the vibrating screen.hope this helps and your welcome to ask as many questions as you want.
@@corsagafa thank you so much for the info and that's going help me alot thank you. I do injoy your videos is awesome and it helps me.
Thank you for sharing this. Do you have any idea how we can seperate copper from aluminum? They both have almost the same size
Hello,Its not something I have tried but if they are both the same size the copper will be heavier so you could have a screen like this one I have that blows air up through the holes that is strong enough to stop the alluminium from falling through the holes but not strong enough to stop the copper from falling through the holes.The other way I have seen is with a fast moving conveyor belt and when the granules shoot of the end the heavier metal will "fly" further than the lighter metal.Thanks for your comment.
@@corsagafa great. Have you seen any video or something to do that? I mean seperation of aluminum and copper
@@mojtababerelian Yes I have seen the videos here on youtube.I find it good to try different spellings in the search,so as not to miss any videos, such as copper and aluminum separation.
Hi, great video, i have one doubt, how does it work from the inside? i mean, the part where the air blows? i cannot see when you pour the full mix and how it goes on and separate it, thank you so much for this video!!
Hi,most of the copper is very thin,about 0.2mm thick so it will easily pass through the 1mm holes in the screen and slides down and out of the lower chute into the clean copper bucket but the bigger pieces of plastic insulation are more than 1mm so they stay on the top of the screen and come out the higher chute into the waste bucket. The air is pumped up through the screen to stop the dust from falling down through the screen,hope this helps and thanks for the comment.
@@corsagafa thanks, you are the MVP
Have you figured out how much copper you can separate per hour with this? Will it also work with aluminum wire?
Hello,no I have never timed how long it takes to granulate the copper but its one of the most asked questions,so I do intend to make a video showing how long it takes and all the factors that can affect the speed of production.Most of the wire I do is from cars so I dont see hardly any aluminium wire,so I dont have any experience with it but as far as I know aluminium is very abrasive and I would be worried about the damage it could cause to the granulator blades and internal parts compared to the financial gain because aluminium is worth a lot less than copper.
@@corsagafa yes, it can be abrasive, but I believe if the blades are made from hardened steel, they will handle it just fine. Is the wire from cars the fine hair like wire? If so, it will be like the computer wire I deal with. So should work just fine. Keep up the great work and look forward to more video's.
@@urbanprospector3007 yes the wire from cars is thin,around 0.2mm.I do get thinner wire from the car relays but I dont take the risk of it getting washed away.The whole idea of gravity separation is to chop the wire small enough so that the metal and the plastic granules are the same size so you can exploit the difference in weight ,copper is dense so is easy to separate from the lighter plastic.Its not going to be the same for aluminium hair wire,even if you can chop it small enough the aluminium and plastic granules weight will be about the same or the plastic could even be heavier than the aluminium which would make it hard to separate.please let me know how you get on.
Where did you get the granulator .and do you know where I can buy one like that ,or what brand name do you have .if you don't mind sharing
Hello Mike,the granulator is made by Rapid and the model is 1415-V, I bought it from ebay second hand.
where did you get the granulator from
@@MrStocks33 Hello,It was bought on ebay.
Whats your granulation process? How did you set it up? What components? Thank you for your time it is much appreciated!
Hello,I use water seperation and I have plenty more videos on my channel explaining every thing,thanks for your comment.
Thank you very much for this and these ideas.
But I am still looking for the fastest way to remove plastic from copper.
Well water separation is not the fastest,maybe you need to look at dry separation.
Glad you are still doing this, I do have one request/suggestion for a video, can you video your granulator ie the blade part etc, I want to make my own granulator and am wondering the best way to make the blades as your copper is ground down well. Love your setup.
Yes I was thinking about making a video about the granulator,since my first videos I have done some work to it including new drive belt and making new blades.Not sure when I can find the time but I will make a detailed video about it,thanks for your comment.
thanks for sharing. realy appreciate it. going to try to build one to
Good luck with your build and your welcome to ask questions if you need any advice
thank you for the encouragement and I will ((o:
Clove copper
First comment!
how mach lb do think full buck is ?
Hello,I have not weighed the bucket but one litre of copper granules weighs 3.6 kilo,so 1 US gallon=3.78 litres ,so if my maths are correct then 1 US gallon weighs 13.6 kilos and 13.6 kilos =30lb
Hii I'm having a copper cable granulator just like you but I'm unable recover fine copper wire from the plastic can you please help me with this :)
Hello,there is a lot of information in my other videos so it would be a good idea to watch them.Also tell me what kind of separation system do you have,water or air and what size screen do you use in your granulator.Make a video so I can see your system.You are welcome to ask as many questions as you want.
Hii I'm using a 2.5mm screen in my granulator, I'm using a vibrator and a dust tonner to separate copper and I'm able to recover most of the copper but the light weight copper particles gets mixed with plastic and I'm struggling to recover it
Can you please provide me your email address or WhatsApp no. Where I can provide you with photos and videos
@@abhinavjain8163 Hello,even in professional air systems there can be about 10% loss of the copper.This can be improved by screening the plastic to separate the small copper from the bigger pieces of plastic and then use water separation .
@@abhinavjain8163 Hello,I only answer questions through comments on youtube so everyone can get the information.
Selll kha kare
Hi thanks for video how did u get to shred ur wires so small
Hello,I use a granulator to chop the wire to this size,if you want to see how, I have more videos on my channel,thanks for your comment
Bonjour très impressionnant satisfaction merci je suis intéressé
Merci
Forgot to gild the Lilly
Is that regular window screen you use?
Not sure,it was bought on ebay,I just did a search for stainless steel mesh. Iam using a different screen now made from microwave doors which can be seen in this video at 13.14 ruclips.net/video/Ibx6DWyOIJI/видео.html
I need one can u let me know the cost for the same located in mumbai india
U can whatsapp me on 9987605793
Hi,sorry I dont sell,I made these videos to show how to do it your self.
How did u make this
Its quite simple,just a box with some wire mesh.The vibrating screen has had some changes made to it so keep a look out for it in future vids.I have other videos and Iam working on one or two new videos that should be out in a few weeks.
Try sliding it like a gold prospector does
Not sure what you mean when you say sliding,maybe you mean water sluice, then watch this video ruclips.net/video/fkc0NAxPYic/видео.html
I have a wood burning stove I burn my wire in
How much price sir
Hello,its not for sale,I make these videos to show how I made my own system,good luck with your scrapping.
I save money and burn it
Dear Sir,you have a wonderful low cost concept of reclaiming copper,really appreciate,can you please tell me how much do you pulverize copper per hour in your machine?
Regards
10 dollar suckys
I know I'm a little late to comment gtv but if your in the us then burning wire is illegal and can get you massive fines if not jail time and most scrap yards will not accept burned copper