Installation AirsoftPro TDC Hop-Up mount on JG BAR-10
HTML-код
- Опубликовано: 17 окт 2024
- CNC TDC device mount on Airsoft sniper rifle. Allow easy and smooth Hop-Up adjustment. Modern design and premium CNC quality.
WHERE TO BUY?
Order online at www.airsoftpro.cz, product codes 8995 and 9004.
airsoftpro.cz/...
Personally I think super glue would not last long and would prefer a screw to hold it in place , perhaps you could incorporate one with you hop unti
They actually did. Well at least on the 26mm version (WELL L96 and others). You notice the screw near the spirit level on 26mm version? They designed so that the screw would screws up to the hop up chamber that's made by them. Check their website for the product TDC 26mm, in the last picture they'll show you
Pourquoi ne pas avoir fait un gabarit directement la les mesure ne sont pas précise du tout
masih ada om?
Are you seriously kidding me? Super glueing that tdc to the outter barrel? Not a damn chance would i ever buy that, it will never stay on for long and a total waste of money, best think you can do is go fire who ever came up going back to this shit gen 3 slide hop and then even worse creating a tdc thats not even screwed into the outer barrel. You guys used to be worth coming to for parts and now nope you guys have just gone backwards 10 years
I just ordered a couple of the TDC's (26mm for my Cyma CM702) and the 26mm version had the screw included to screw in their own Gen 3 Hopup chamber. So that must hold on tight. I'll install it tomorrow.
@@infernofury5567 how did the tdc is working? Was the intalling hard?
@@alexbogdan7932 works like a charm. Definitely worth the money..! Not hard at all, just make sure you measure carefully and take your time. If it’s off a few millimeters, don’t worry, the thread isn’t in the barrel but in the tdc itself which is amazing.
I’d recommend to screw it in the gen3 chamber loosely but also glue it to the barrel. And after that’s hardened screw it in a bit more to secure it. This way you’ll prevent it from lifting at the front!
Good luck and let me know how it worked out!
Super gluing like 99% of the tdc on the market. I have the 26mm one and it is attached by 1 screw. I added super glue too.