Top 2 short circuit protection
HTML-код
- Опубликовано: 2 авг 2024
- simple short circuit protection
In this video we look at how short circuit protection make
next video:
• make your own Tesla Co...
click for subscribe:
ruclips.net/channel/UCIQ5...
** Don't forget to subscribe my channel ************************
Core :
Waire = 0.5 mm
inside Dia= 6mm
Outside Dia = 10 mm
----------------------------------------------------------------------------------
🔷Time Stamps Chapters :
00:00 - short circuit protection With MOSFET
04:24 - short circuit protection With Relay
----------------------------------------------------------------------------------
telegram : t.me/electrowiz_ir
Instagram : / electrowiz.. .
Web : electrowiz.ir (coming soon 😊)
#Electro_Wiz
Good
Amigo, creo que tus videos so muy adecuados para las necesidades de todo público, no sólo los que son de este rubro. Por este motivo, pensando que tienes una gran empatica tu público te sugiero que acompañes con los datos de cada elemento electrónico y un pequeño diagrama. Gracias y saludos
Gracias por tu útil comentario. (google translate😉👍).
Although I have not seen a clip of making a board like this, I thought of this way last week, haven't done it yet (because I'm too lazy), now I see someone doing it a year ago.😁
😃😃😃😃😃😃
I really don’t understand how opto Ic can work like that for u I tried it and the opto was leaking the ground to the gate of the fet all 5 type I use leaking ground and the shorting cont turn otter opto so I really don’t get it
good afternoon, the first circuit can be used to protect a switching source, but to isolate it from the 110 or 220v ac line? thank you
No , you can not.This circuit is designed to power the battery
Thanks for the video. Can you do the second solution for 24v
Yes , for 24V power supply , Just use a 24 volt relay and change resistor 220Ohm to 2.2 K ohm or near --Good Luck 🙂
@@ElectroWiz Thank you, I will try it 😁
bisakah ini buat OCP, ittu yg jika speaker/kabelnya short maka amply akan protek atau off sendiri
The first circuit is designed to protect against momentary short circuits
Nice video bro. Can it be used for variable voltage between 12V to 24V?
Yes 😎
Nice video🙂👍, i want to ask. How many uH the toroid? What is the size of the toroid wire, how many turns? And what size toroid?
The amount of inductor capacity is not important in this project ,you can use any toroid, but i am use 10*4 mm core and 0.3 mm wire . 🙂
@@ElectroWiz alright.. Thanks for the information 👍🙂
Please good job is done BUT you have to sketch the schematic diagram for every work.
You are right🙏
How can the toroid work with DC ?
The toroid works as a current transformer for powering the LED inside the PC817 optocoupler, but any type transformer doesn't work with plain DC.
If the current( pulse current) passes through the wire that has inside the toroid, it will induce current to pc817
@@ElectroWiz , thank you for the quick reply.
Amper??
10 amper
10 amper
@@ElectroWiz Ok, tell me honestly which Circuit will consume less power. And which one will act faster?
@@skidkev6421
The first one is faster and less consuming, but the second one is more reliable
Which toroid size or how many wire wounds can I use?
Troppo scari gli spazi fra le piste
Първата схема е неправилно съставена. При натискане на бутона се зарежда капацитета на гейта и включеното състояние остава до момента на разреждането му!
The circuit works -and. Yes, your analysis is correct